Milwaukee M18 18-Volt Lithium-Ion 1/2 in. to 4 in. Force Logic High Capacity Cordless Knockout Tool Kit w/Die Set 3.0 Ah Batteries
$1,999.00
Complete your work by choosing this wonderful Milwaukee M18 Lithium-Ion Force Logic High Capacity Cordless Knockout Tool Kit with Die Set Batteries.
In stock
Description
The Milwaukee M18 FORCE LOGIC 10-Ton Knockout Tool 1/2 in. to 4 in. Kit reduces the tedious steps of hole making, improving user speed and limiting user fatigue. This knockout punch tool is powerful enough to punch up to 6 in. holes in 12-Gauge mild steel and 14-Gauge stainless steel. The Quick Connect Alignment System provides users with easy set-up without the weight of the tool and speeds up repetitive punching. The tool is compatible with all Milwaukee EXACT punches and dies. The knockout dies are rated for both mild and stainless steel punching. Vivid red cross hairs provide users with accurate alignment and slug removal ports provide optimal slug removal. The gripping surface on the EXACT punches enables users to thread faster. The cordless 10-ton knockout tool delivers the Easiest Way to Punch.
- Powerful hydraulic pump delivers up to 10-tons of force
- Powerful enough to punch 6 in. holes in 12-Gauge mild steel, and 14-Gauge stainless steel
- Part of the M18 system, featuring over 200 plus tools
- Quick connect Alignment system speeds up alignment by delivering the easiest set-up, and enabling the clearest view of the work surface
- EXACT punches and dies are rated for both mild and stainless steel punching
- EXACT dies feature vivid red cross hairs for clearest alignment
- Large size ID markings permit easy punch and die selection
- Tooth geometry of exact punches, and slug removal ports in exact dies, deliver optimal slug removal
- Compatible with competitive accessories
- Compatible with all M18 batteries and M18 chargers
- Includes: 2676-20 M18 FORCE LOGIC 10T knockout tool, 7/16 in. draw stud, 3/4 in. draw stud, 1-1/8 in. draw stud, quick connect Alignment system, EXACT 1/2 in. to 4 in. conduit punches and dies, 2 M18 REDLITHIUM XC extended capacity battery pack, M18 and M12 multi-voltage charger, and carrying case
Additional information
| Weight | 50 lbs |
|---|---|
| Dimensions | 32.25 × 21.75 × 9.60 in |
| Amperage (amps) | 0 A |
| Included | Attachments Included, Case Included |
| Voltage (v) | 18v |
| Tools Product Type | Power Tool |
| Power Tool Features | Blades Included, LED Light |
| Number of Total Batteries Included | 2 |
| Number of Tools Included | 1 |
| Motor Type | Brushed |
| Model | 2676-23 |
| Cordless/ Corded | Cordless |
| Batteries Included | Yes |
| Cordless Tool Type | Specialty |
| Condition | New |
| Color Family | Black |
| Charger Included | Charger Included |
| Battery/Charger | 2 Batteries & Charger Included |
| Battery Size | 18-volt |
| Battery Power Type | Lithium Ion |
| Battery Amp Hours | 3 Ah |
| Voltage (volts) | 18 |
Reviews (11)
11 reviews for Milwaukee M18 18-Volt Lithium-Ion 1/2 in. to 4 in. Force Logic High Capacity Cordless Knockout Tool Kit w/Die Set 3.0 Ah Batteries
Only logged in customers who have purchased this product may leave a review.
Related products
Metalworking Tools
Model# 2677-23-2804-20-48-89-9221
Metalworking Tools
Model# 2676-23-2853-20-48-89-9256
Metalworking Tools
Model# 2677-21
Metalworking Tools
Model# 2677-20
Metalworking Tools
Model# 2676-23-2829-20
Metalworking Tools
Model# 2676-23-2804-20-48-11-1850
Metalworking Tools
Model# 2677-23-2829-20
Metalworking Tools
Hilti 22 Volt 100kN NPU 100 IP-A22 Lithium-Ion Cordless Knockout Punch (Tool Only)
Model# 2163390
Jarrod Nikolaus (verified owner) –
Great product that is very easy to use. If you punch alot of holes every day this is the punch for you. My company…before discovering this tool…was using a hydraulic punch that took alot more time to use. The Milwaukee punch…with the use of a step bit… makes the holes quickly and effortlessly. We save time with this tool which allows us to be more productive performing other tasks.
Kendall Morissette (verified owner) –
I’ve had this for a month now and have pulled it out more than i thought i would. The ease of use is great, it quickly punches clean holes with no struggle, doesn’t matter if its 3″ or 1/2″, it gets the job done! Its definitely on the pricey side but the quality is there and if your an electrician that often needs a hole where there isn’t one you will really appreciate this tool! It was a little rough dropping the coin but I am certainly not regretting it, good job Milwaukee!
Johnnie Waters (verified owner) –
Timesaver, goes true 800Amp disconnect metal like butter, had it for 1 month, use it every day for aproxmetly 10×4″ holes and 15×2″ holes. One of the best expenses on tools, worth every penny, Milwaukee are the best tools.
Blaze Howe (verified owner) –
Today’s electrical panels have too few knockouts due to the physical size of the panels. To overcome this, I use either a 4″x4″ or 6″x6″ trough and punch as many holes as needed to accommodate all the cables and conduits. This tool is made for this. What would take 1/2 day to do with the hydraulic punch takes 30 minutes with this tool. The ONLY downside is that Milwaukee really doesn’t make it clear that one MUST use the 49-16-2260S and 49-16-2661S Punch and die to make the 1/2″ hole. That SS set uses the 49-16-2680 7/16″ draw stud instead of the 3/8″ draw stud the competition uses. Other than that little description anomaly, this tool is fantastic.
Alexandrea Nolan (verified owner) –
I wish I had purchased this tool sooner. Easy to use and fast.
Nils Wolff (verified owner) –
Fast easy tool to use and make the job quick
Milton Schultz (verified owner) –
This tool and kit might be expensive, but the money you lose up front saves money in time by the end of the day. It’s ten times faster than hydraulic knockouts and twice as clean.
Hellen Pfannerstill (verified owner) –
The hole puncher is easier then i was imagine to use.
Minerva Crooks (verified owner) –
Been making 2”-4” holes in switch gears and termination cabinets for Pepco I have yet to run into any problems with this tool. If you are making multiple holes in metal this is a game changer.
Clair Ledner (verified owner) –
Fast easy tool to use and make the job quick
Wallace Schneider (verified owner) –
My boss bought me the 1/2” to 4” set a few years ago and I love it, extremely fast. I also find it safer when punching a live cabinet vs using the greenlee with the pump and the hose dangling, you can put the cup draw stud and screw the cutter on, then tighten everything and then get the pump and punch the hole. Milwaukee is so much easier best tool they have invented