Milwaukee M18 18-Volt Lithium-Ion Cordless FORCE LOGIC 600 MCM Crimper Kit with 750 MCM Cu/1000 MCM Al Cable Cutting Jaw
$3,400.00
Keep your concrete or wood floors looking new by using this Milwaukee M LithiumIon Cordless FORCE LOGIC Crimper Kit with Cu Al Cable Cutting Jaw finish.
In stock
Description
The M18 FORCE LOGIC 600 MCM Crimper is the Most Accurate Way to Crimp producing cULus classified crimps according to the UL 486A-B classification standards for #8-600 MCM Cu and #8-350 MCM Dual Rated Anderson, Blackburn Burndy, Ilsco, Panduit, Penn-Union and Thomas and Betts Connectors. Utilizing Milwaukee U Style Dies that feature vivid wire size markings, industry standard color markings and imprint wire size onto the connector after crimp completion, Commercial Electricians benefit from its ease of use and easy inspection. A New Jaw Design Holds the Connector for Instant Alignment and Predictive Force Monitoring (PFM) ensures proper pressure is reached on every crimp. PFM actively measures pressure and automatically modifies all performance levels of the system allowing the high speed hydraulic pump to power through the beginning of a cycle and land at precisely the right pressure, protecting internal components, to complete the crimp. The result, Milwaukee crimpers are the most accurate, fastest and most durable crimpers in the world. Milwaukee 750 MCM Cu/Al Jaw produces the fastest installation-ready cuts. The superior blade geometry effortlessly cuts through 750 MCM Cu and 1000 MCM Al in under 3 seconds. The anti-spreading open jaws deliver the most compact 750 MCM Cu cutting solution which allows you to cut effortless in the tightest panels without looping. Use with the 2679-22, M18 FORCE LOGIC 600 MCM Crimper.
- Easily interchangeable with 600 MCM crimping jaw (49-16-U000), 750 MCM crimping jaw (49-16-U111) and 750 MCM cutting jaw (49-16-2780)
- Proprietary jaw holds connector for instant alignment
- In-line design and 350 head rotation: easy access in the tightest panels
- Easy-open jaw for fastest repetitive crimping
- Hydraulic system is optimized for consistent performance from 0°F to 122°F
- Tool records and stores every crimp made, ONE-KEY enabled for professional report building
- Weather protected electronics keep dirt, dust and moisture out
- Compatible with all M18 batteries
- Crimper, FORCE LOGIC, press, U die, 600 MCM, M18 crimper, cordless crimper, Milwaukee crimper, aluminum dies
- Includes: one 2679-20 M18 FORCE LOGIC 600 MCM crimper, two 48-11-1820 M18 REDLITHIUM CP2.0 battery pack, one 48-59-1812 M18 and M12 multi-voltage charger, one 42-55-2678 carrying case, one #8 aluminum U style die 49-16-U008, one #6 aluminum U style die 49-16-U006, one #4 aluminum U style die 49-16-U004, one #2 aluminum U style die 49-16-U002, one #1 aluminum U style die 49-16-U001, one 1/0 aluminum U style die 49-16-U01A, one 2/0 aluminum U style die 49-16-U02A, one 3/0 aluminum U style die 49-16-U03A, one 4/0 aluminum U style die 49-16-U04A, one 250 MCM aluminum U style die 49-16-U250, one 300 MCM aluminum U style die 49-16-U300, one 350 MCM aluminum U style die 49-16-U350, 750 MCM cutting jaw (49-16-2780)
Additional information
| Weight | 7.65 lbs |
|---|---|
| Dimensions | 6.06 × 24.65 × 18.54 in |
| Batteries Included | Yes |
| Battery Amp Hours | 2.0 |
| Battery Power Type | Lithium Ion |
| Battery Size | 18-volt, M18 |
| Color Family | Red |
| Condition | New |
| Cordless Tool Type | Specialty |
| Cordless/ Corded | Cordless |
| Model | 2679-350A-49-16-2780 |
| Motor Type | Brushless |
| Number of Batteries Included | 2 |
| Number of Total Batteries Included | 2 |
| Tools Product Type | Power Tool |
| Variable Speed | No |
| Voltage (volts) | 18 |
Reviews (51)
51 reviews for Milwaukee M18 18-Volt Lithium-Ion Cordless FORCE LOGIC 600 MCM Crimper Kit with 750 MCM Cu/1000 MCM Al Cable Cutting Jaw
Only logged in customers who have purchased this product may leave a review.
Related products
Specialty Power Tools
Model# 48-44-0410
Specialty Power Tools
Milwaukee M12 12-Volt Lithium-Ion Cordless Sub Scanner Detection Tool Kit
Model# 2291-21
Specialty Power Tools
Makita 18-Voltt 5.0Ah LXT Lithium-Ion Cordless 4 ft. Concrete Vibrator Kit
Model# XRV01T
Specialty Power Tools
Model# 49-12-KITC
Specialty Power Tools
Model# R8694B
Specialty Power Tools
Model# 48-44-2777
Specialty Power Tools
DEWALT 20-Volt MAX Cordless 1-1/8 in. Pencil Vibrator 14,000 VPM (Tool Only)
Model# DCE531B
Specialty Power Tools
Model# 2457-21P
Carole Hoppe (verified owner) –
this tool is the best knockout ever. worth every penny and then some. I just used it to knockout over 20 holes ranging from 2 inch to 1 inch and its fast and doesn’t even bog down any. A hydraulic one will cost you just as much or more but the Milwaukee one is so much better and easier. great tool
Macy Harber (verified owner) –
Great tool. I love it. If I could change one thing would be the safety button. Uncomfortable position of it.
Diego Kuhlman (verified owner) –
easily use one hand and cuts like butter
Abagail Stamm (verified owner) –
This is light and cuts great. Love it
Yoshiko Moore (verified owner) –
Amazing. Just a little expensive
Christiana O’Connell (verified owner) –
This set of knockout cutters and tool is quite the all encompassing metal hole tool. Its cutters go up to 4 inch holes. It has a fast cutter adapter to make cutting many holes quicker, and then the normal mandrels for the largest holes and standard cutting. The sizes of the predrilled holes you must cut are from 3/8 inch to 1 1/8 inch (for the largest sized holes – to 4 inches). It cuts quickly and easily through most sheet metal. I presently have only used it for a 2 inch hole in aluminum gauge 8 or 9, and the tool did not even know the metal was there. It sliced through that metal in seconds and left a very clean and even cut. Surprisingly the cut metal was not as sharp edged as I thought it might be after the cut, so that was yet another pleasant surprise. I have yet to use it on sheet steel, but I have no doubts that it will slice easily through any metals it is advertised to work on. I also happen to have other M18 tools and it is nice that the batteries are all interchangeable. It comes with a moderately small amp hour battery, and since I had other M18 tools, I could put my other batteries on this tool without issues for continuous production type work. Nice quality tool and I highly recommend it to those who need metal working cutter tools.
Edgar Kohler (verified owner) –
Extremely lightweight, great for one handed operation. As an electrician who uses mainly uni-strut and up to 1” conduit, it suits all of my needs.
Davion Reinger (verified owner) –
I have been buying Milwaukee tools since 1975. The only time I will not purchase a Milwaukee tool is that they do not make the tool. They are better today that years ago. And I still use the tools I bought in the 70’s. They are almost indistructable.
Tressa Satterfield (verified owner) –
Having the old Milwaukee 10 ton model for the last couple of years, I was delighted to try out their latest 6T M18 force logic 6T knockout tool quick connect alignment and I am not disappointed.The tool is40 percent lighter and more compact than the older model and the cross hairs on the punch and die make for a very accurate cut. The tool itself is rugged and made with true precision. With only 3 pieces to connect, it makes for a faster and safe procedure. Each cutter and die has been clearly marked with large numbers which indicate the size. So far I have only used the 2 inch and 4 inch thirty five times cutting through ¾ inch mild steel cabinets. plus the 2 inch for a couple of piece of stainless steel, but in every case, the cut is flawless with no sharp edges to deal with. After the 35 knockouts, the cutter is as good as new with no sign of any stress. A slow steady pressure is only necessary to successfully cut through. Because the tool has been redesigned there are no requirements to hold the tool when setting up the punch and dies as the tool connects onto the cutter and once positioned, give a quick twist and you’re ready to operate using the trigger and the cut out piece stays in the cutter and is easily removed. The hard carry cases are the perfect addition to this kit. It comes with a charger and one M18 2.0 battery. Photos show me testing the tools performance on 1 !/4 inch scrap steelSo is it worth the cost? AbsolutelyAs with all Milwaukee tools, it has a 5 Year Tool & 2 Year Battery Warranty.
Marjolaine Murray (verified owner) –
No more leaking pumps
Karen Hirthe (verified owner) –
Ponty of power to cut conduit.. Very light weight
Aditya Padberg (verified owner) –
Outstanding performance
Alexandrea Mohr (verified owner) –
Great intermediate saw. I own the larger and smaller version as well. This saw is now my “go to” 90% of the time.
Dayana Fay (verified owner) –
This bandsaw is perfect, I use it for cutting emt 3/4,1” conduit and strut regularly and it’s perfect. Very fast and smooth, not too heavy either.
Berenice Halvorson (verified owner) –
We have only used it once so far but it works great.
Marjorie Douglas (verified owner) –
This bandsaw it’s super nice and easy to use, I like it because is not heavy like the last one
Durward Becker (verified owner) –
Awesome! Cut through galvanized piping in seconds.
Zoey Marquardt (verified owner) –
This particular bandsaw is possibly the best bandsaw I have ever owned. it is a shame it’s not more available.
Valerie Towne (verified owner) –
satisfied
Pearline Treutel (verified owner) –
Cuts like butter and is a daily favorite with the coworkers on the job site.