Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 10 in. Dual Bevel Sliding Compound Miter Saw with Stand (Tool-Only)
$639.00
Milwaukee FUEL Lithium-Ion Cordless Brushless Dual Bevel Sliding Compound Miter Saw Bare Tool provides users a solution to replace their corded miter saws.
In stock
Description
The M18 FUEL 10 in. Dual Bevel Sliding Compound Miter saw was designed to meet the demanding needs of professional carpenters and remodelers. Delivering greater capacity than many corded 10 in. sliding miter saws and the POWERSTATE Brushless motor delivering corded cutting performance the 2734 provides users a solution to replace their corded miter saws. The REDLITHIUM HD9.0 battery pack delivers up to 400 cuts per charge making the saw capable of lasting an entire day on site with only 1-pack. Premium features like an adjustable stainless steel detent plate, cam locking miter system, easy access bevel adjustment lever and both a detent override lock and chop lock lever located on the front of the tool the M18 FUEL miter saw is designed for easy operation and repeatable, accurate cuts. Milwaukee 48-08-0551 is designed for increased portability and jobsite durability. With aluminum main beam construction, the Milwaukee Folding Miter Saw Stand weighs in at only 31 lbs. Steel legs and support extensions are designed from maximum strength and rigidness to support even the heaviest work pieces.
- 5-3/4 in. vertical capacity (base board against the fence)
- 2×12 horizontal capacity (lying flat at 90°)
- 5-1/4 in. vertical capacity nested crown
- Cam locking miter system with adjustable stainless steel miter detent plate and 11 detent locations
- Dual bevel with 9 detents and easy access bevel lever
- Shadow cut line indicator for quickly lining up cuts
- Top and side carrying handles for maximum portability
- Detent override for easily setting miter locations outside of detents
- Up to 400 cuts per charge
- Tall sliding/removable fences to support large base and crown against the fence
- Includes: 10 in. dual bevel sliding compound miter saw, blade wrench, carbide tipped blade, dust bag and clamp, miter saw stand table top (48-08-0552)
Additional information
| Weight | 45 lbs |
|---|---|
| Dimensions | 20.00 × 31.89 × 19.17 in |
| Arbor Size | 5/8 |
| Cordless/ Corded | Cordless |
| Battery Amp Hours | 0.0 |
| Battery Power Type | Lithium Ion |
| Battery Size | 18-volt |
| Battery/Charger | Tool Only |
| Bevel Type | Dual |
| Blade Diameter (in.) | 10 |
| Charger Included | Charger Not Included |
| Color Family | Red |
| Condition | New |
| Construction Material | Aluminum |
| Cordless Tool Type | Miter Saw |
| Batteries Included | No |
| Included Accessories | Blade Guard System, Stand, Tool Only |
| Cuts Through | Wood |
| Maximum Amperage (amps) | 0.0 |
| Maximum Cutting Thickness (in.) | 6 |
| Maximum Degree Miter Cuts - Left | 45 ° |
| Maximum Degree Miter Cuts - Right | 45 ° |
| Miter Saw Type | Sliding Compound |
| Model | 2734-20-48-08-0551 |
| Motor Type | Brushless |
| Number of Total Batteries Included | 0 |
| Power Source | Battery |
| Power Tool Features | Electric Brake, Keyed Blade Change, Positive Stops, Stand Included |
| Tools Product Type | Power Tool |
| Voltage (volts) | 18 |
Reviews (71)
71 reviews for Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 10 in. Dual Bevel Sliding Compound Miter Saw with Stand (Tool-Only)
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# JR3070CT
Saws
Model# DW304PK
Saws
Model# 6955-20
Saws
Model# 1590EVSK
Godfrey Schuppe (verified owner) –
Cuts well but the saw dust intake does not work well, dust flys all over the place. Wish there was an adaptor to add to it for better saw dust collection.
Bennie Cremin (verified owner) –
I have a Milwaukee 10 inch compound miter saw , it was a little difficult to attach but it went on . I was a little disappointed in the arms , they sag quite a bit when extended but it’s ok . For the price I was disappointed , i expected more from a Milwaukee product . Still my favorite tools though . Other than that I’m satisfied, thank you for asking my opinion
Jessica Wilkinson (verified owner) –
Thx very much
Dorothea Russel (verified owner) –
It was very easy to put together. Works great.
Reilly McDermott (verified owner) –
Awesome….love it!!!!
Harley O’Hara (verified owner) –
Just to short distance and not strong enough the R & L arms support.
Carmen Kuvalis (verified owner) –
i have had this saw for a few months now and no complaints except one. my neighbor and i were truing the blade and the fence to blade alignment was fine. The blade to table alignment however, was a little more complicated. in the owners manual on page 11, “Squaring the blade to the table” step 6, says to use a T25 wrench to adjust the bevel setting. This is inaccurate as this is adjusted with an Allen wrench, not a T-25. naturally, the adjustment screw stripped out and i had to call SAWDUST. they kindly sent me a replacement and when it arrived it was part # 44-60-0026 shown on the bag as well as in the Service Parts List. So they sent me out a replacement part, assuring it would be the correct one after describing it. Sure enough, the same part was sent a second time. Again, i contacted support and spoke with someone who took the time to actually look into the problem, understand how the part worked, and made sure i would receive the right part this time. the next day i get a call from the same person. the part listed in the Parts Service List is part # 45-04-0026. close enough to make a mistake. (I even sent her pictures of the part i got from them, and the part i needed replaced – Included in post) so now i am waiting for the actual Detent Mount Adjustment Screw replacement. Additionally if you purchase this saw, make sure you DO NOT use a T25 wrench to adjust the blade to table bevel. Double check the screw itself to make sure it is an Allen screw. i was told that this specific part is 45-04-0025 listed in the Milwaukee Tool parts price list as “SCREW ADJUSTMENT” whereas 45-04-0026, shown in the Parts List is listed as “DETENT MOUNT ADJUSTMENT SCREW”(These are not the same parts) Part 44-60-0026 (the one i received twice is listed as “CHOP STOP PIVOT PIN” Neither of these are detailed in the owners manual and you have to pull the Service Parts List PDF from Milwaukee’s website because home depot has the wrong item listed as the owners manual on their site. In case anyone runs across this same problem when making a blade adjustment, i thought i would post this up here. otherwise it a great saw with great cutting finishes, the battery outlasts the jobs i use it for, cleanup and storage is a breeze with my new French Cleat system i used it on. i can actually hang it up by the Kickstand, or the black loop hook in the back and it wont fall off the wall. ***NOTE FOR MILWAUKEE: 1. You need to update your Operators manual to indicate the correct type and size wrench for this adjustment screw. (Page 11, bullet point 6.) 2. Service Parts List PDF to show the correct part number listed for this item (45-04-0025) 3. Either include with the saw or make available for purchase, Part #61-10-0415 and 61-10-0410 so that the tool can be properly calibrated and adjusted per your instructions in the Operators Manual.
Nyah McKenzie (verified owner) –
Out of the box very easy to assemble and set up. Very lightweight and portable.
Kane Gislason (verified owner) –
Excellent unit, great cuts, and superior battery cycle.
Devan Daugherty (verified owner) –
Excellent compound miter saw in a cordless design that can go anywhere.
Opal Weissnat (verified owner) –
The saw Performs just like it should and it needed no tweaking out of the box it was perfectly square set up just right. The line that identifies the cut line Stands out the Most of the features and was dead on I’ve had the saw about 45 days and it meets my expectations thanks for a great product for me a experienced woodworker. Steve
Laury Roob (verified owner) –
The stand is awesome!
Rozella Kshlerin (verified owner) –
Very high quality attention to detail made simple
Janae Nicolas (verified owner) –
Awesome stand. Works perfect with my Milwaukee M18 Miter.
Winfield Breitenberg (verified owner) –
Works great, as good or better then any AC powered saws and better yet, no snarled cords to deal with.
Zaria Konopelski (verified owner) –
Awesome!
Blaze Fisher (verified owner) –
This stand was better than I expected, solid construction and easy to store.By far the best stand ever made
Saul Funk (verified owner) –
Nice tool. A little heavier than expected. Easy to assemble. Well made.
Chelsie Cronin (verified owner) –
Really nice, wish they Milwaukee made saw horses kinda like this miter saw stand.
Jaqueline Romaguera (verified owner) –
Another great Milwaukee product.