The MILWAUKEE M18 FUEL 18GA ¼” Narrow Crown Stapler Kit delivers peak productivity, providing users with unmatched stapling performance without the hassle of a compressor and hose. A nitrogen air spring mechanism gives this cordless staple gun power to consistently sink staples to the proper depth in hard materials with the ability to adjust to drive staples in soft materials without blowing through. The combination of a POWERSTATE Brushless Motor and REDLINK PLUS Intelligence provides an unmatched fire rate with zero ramp-up time, keeping users efficient throughout the day. This battery powered narrow crown stapler is compact and lightweight, giving users better access into tight spaces and limiting fatigue throughout the day. The M18 FUEL 18GA ¼” Narrow Crown Stapler delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of a cordless tool. The tool includes two work contact tips and a reversible belt hook. In addition to the narrow crown stapler, this kit includes two work contact tips, one M18 REDLITHIUM CP2.0 battery pack, an M18 & M12 Multi-Voltage Charger, reversible belt hook, and a contractor bag.
- Delivers consistent, clean staple setting, with the power to drive into hard materials and adjustability for soft materials
- Compact size and light weight
- Zero Ramp-Up Time
- Fully compatible with the M18 system, featuring over 200+ tools
- Tool free drive depth adjustment
- Sequential and contact actuation firing modes
- Dry fire lockout
- No Gas cartridge required
- 2 work contact tips included
- Reversible belt hook included
- ON/OFF power button
Katherine Gusikowski (verified owner) –
Works great and I like the way you can set the depth
Alexis Hermiston (verified owner) –
Great tool.
Stacy Block (verified owner) –
I found no performance difference from using a pneumatic crown stapler. The plus side is that you are not connected to an air hose and compressor.
Billie Brekke (verified owner) –
The Milwaukee stapler is handy for many jobs where you may have typically used the pneumatic type in the past. It is easy to prepare for the quick jobs that you need to take care of. The battery will last hours to provide fastening for the extended projects too. The magazine is very easy to load. Just turn the tool upside down and squeeze the locking clamp. The tool requires minimal adjustments when moving from ½ to 1-½ inch fasteners. The driving depth is adjusted quickly with a few strokes of the wheel located near the tip. The tool is so quiet you can use indoors without disturbing others. It just sounds like someone used a fly swatter. A LED located on the front of the battery slide provides illumination around the tip for working in those dimly lit areas. The tool is well balanced and can be set standing up on the battery or laid on its side. Rubber bumpers on the sides keep it from sliding off or marking surfaces. There is a metal loop hook for hanging but I’m not sure it is meant to use on your belt. The tool stops firing when there are still 6 staples in the magazine. One thing that I did to provide pin-point accuracy is to mark the fastener slot with a paint pen. The tip bumper has a line for the center of where the staple exits but I added a mark on the side so you can place it in slots or locate with increased positioning accuracy.
Jamir Blanda (verified owner) –
I did an entire aluminum soffit and f-channel job with this gun. It worked flawlessly! Definately recommend.
Kali Hickle (verified owner) –
Good tools and powerful.
Alysson Reichel (verified owner) –
Great tool., with a lot of power..this really sink the staples.
Jaclyn Gislason (verified owner) –
No ramp up time, shoots staples to desired depth every time. Performs flawsley on every job.
Kailey Prosacco (verified owner) –
It’s been an excellent stapler
Carlee Raynor (verified owner) –
Absolutely awesome tool. Drove the 1″ crowns into OSB easily. There were a few that maybe 1/32 above surface, but that was when I got quick with the tool and may not have pey enough pressure on the safety. Good buy.
Savanna Jerde (verified owner) –
4* because I had to return first one because of a spring jam. And the spring on this one seems weak as well. I hope Milwaukee isn’t pulling a dewalt and starting to slowly make their products cheaper
Lelia Weber (verified owner) –
I am really excited to finally get my new m18 fuel 1/4”narrow crown stapler by Milwaukee, This stapler work’s beautifully without any problems at all for just about any fastening need .I would absolutely recommend this tool to anyone who is in need of a great tool for a wide range of fastening
Coralie Effertz (verified owner) –
The Milwaukee 18v crown stapler operates as fast as the pneumatic ones. It also has an easy to adjust depth gauge. I highly recommend this tool as it is equal to its pneumatic cousin.
Minerva O’Reilly (verified owner) –
Another great product from the people at Milwaukee. This is a great nailer for installing trim, baseboards and moldings. This is also great to to use in the wood shop for many kinds of projects.I found this nailer to be easy to use without a cord or hose and is very quiet when using. This nailer is easy to load and has an easy to use nail set depth adjustment.The nailer comes with a heavy duty carrying bag, battery and charger.
Hershel Wisoky (verified owner) –
This Jigsaw is a monster and I couldn’t find a better one. I love this Jigsaw and am going to get another one
Theresia Ferry (verified owner) –
I was please with my purchase
Duane VonRueden (verified owner) –
This product works great and exactly as advertised. I would buy it again and have no issues or concerns.
Sammy Reinger (verified owner) –
Amazing crown stapler. Alittle pricey but worth every penny
Ross Kulas (verified owner) –
This stapler is perfect. I could not wait to get my hands on this.
Earline Herzog (verified owner) –
It worked great for putting flashing around the bottom of my house plenty of power no problem whatsoever really like the tool