The MILWAUKEE M18 FUEL SUPER HAWG 1/2 in. Right Angle Drill Kit delivers the next generation of ground-breaking performance with the power and speed to replace corded right angle drills. The cordless right angle drill is designed from the ground up to generate corded power, work as fast as the corded competition and provide users with up to 100 2-9/16 in. holes through 6 in. beams per battery charge on an M18 REDLITHIUM HIGH OUTPUT 6.0Ah battery. The Milwaukee SUPER HAWG features the POWERSTATE Brushless Motor, optimized REDLINK PLUS electronics and is powered by REDLITHIUM HIGH OUTPUT Batteries. The drill’s all-metal 1/2 in. keyed chuck delivers users with ultimate durability and long tool life. An all-metal side handle and LED light ensures users have optimal control and visibility while operating their tool. The M18 FUEL SUPER HAWG delivers the performance and run-time to complete single-family home rough-in or the ability to rough-in multiple multi-family units on a single charge. In addition to the drill, this kit includes two M18 REDLITHIUM HIGH OUTPUT 6.0AH batteries, an M18 and M12 Rapid Charger and a contractor bag.
- Mechanical clutch in low speed
- All metal 1/2 in. keyed chuck
- POWERSTATE brushless motor provides constant power under heavy load to power through 6-1/4 in. holes
- REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- M18 REDLITHIUM HIGH OUTPUT XC6.0 battery pack delivers over 100 2-9/16 in. holes per charge and has 50% more power and runs 50% cooler vs. REDLITHIUM XC
- All metal side handle for optimal control
- LED light to illuminate the work area
- Compatible with all M18 batteries
- Includes: M18 FUEL SUPER HAWG, (2) M18 REDLITHIUM HIGH OUTPUT XC6.0 batteries, M18 & M12 rapid charger, side handle, chuck key and contractor bag
Emelia Hermiston (verified owner) –
This drill is excellent it works four hours Without any problems it is very powerful, does the job that’s why we need it. this is our third drill that we purchased this time. Batteries only get better every year.
Pierre Keebler (verified owner) –
A cordless version of the Super Hawg Right Angle Drill, this model provides the functionality of the corded version, without being tethered to a source of power. Powered by the ubiquitous M18 Fuel battery (two 6.0 Amp Hour batteries are supplied), this will be a productive addition for those already invested in the M18 Fuel product line. This model (2089-20) is provided with a keyed chuck, and a (metal) clip is provided for on-tool storage. A model is offered (2811-20) which is provided with the Quick-Lok chuck. The supplied battery charger will charge t he M18 Fuel batteries, as well as the M12 batteries, should you have tools using that power source. An extension handle is supplied which can be attached to either side of the drill motor, to counter the reaction force, should the drill bit jam in the work. A carry bag is provided for the drill motor, batteries, charger and extension handle. The brushless motor appears to have the same power/torque as the corded version and does not exhibit the delay common to some brushless tools. A selector is provided to change between speed ranges (0-500 rpm and 0-1550 rpm), depending upon the bit size, type and material being drilled. The tool incorporates a clutch mechanism when in the slow speed (high torque) range to minimize reaction from a jammed bit. While not a lightweight (almost 15 pounds), the tool is well balanced and provided with a comfortable grip on the nose of the tool. Depending upon the drill type used and material being penetrated, the tool is rated up to a maximum of a 6-1/4 inch diameter hole. A five (5) year warranty is provided for the tool while the battery comes with a three (3) year warranty. The tool is “Red Link” capable, if you or your company is employing that system of tool tracking. The tool arrived with the batteries showing “one bar”, and charged to full charge in less than one (1) hour. The tool is reversible (and lockable) by means of the provided control switch, and speed is variable, controlled by the spring loaded trigger. When tested using a 2 – 9/16 inch carbide toothed hole saw, the Super Hawg quickly bored holes through a 2 X 4, including a section with a knot and a section with three (3) nails driven though (see photos). Although the user’s manual makes reference to a “Hammer Drill Mode” on Page 5, no such function appeared to be present, so I will assume that is a typo in the manual. This tool will be a favorite of electricians and plumbers alike, where large holes have to be bored and there is no power source handy for corded tools. The manufacturer claims that 100 2-9/16 inch holes can be bored on one charge. That coupled with the relatively fast recharge time and ease in carrying an extra battery or two, should allow for a full day’s of work.
Raymundo Lowe (verified owner) –
best 18volt angle drill on the market .
Orion Haley (verified owner) –
Great power, high quality
Nettie Haley (verified owner) –
It works good but Is not enough power to go cordless
Monserrate Turcotte (verified owner) –
The Milwaukee 1/2″ Right Angle Drill Kit is an excellent product. The Hawg isn’t a lightweight tool though, weighing just under 15 lbs without a battery and measures, 20.5 in length, 7.3 in height, 3.8 in width. Aside from the weight factor it’s a power Hawg made to take on any task. Oh, let’s not forget the very bright LED light at the bottom, below the trigger forward of the control switch, which lets you see your work. This Drill comes with two M18 Redlithium High Output XC6.0 batteries, M18 & M12 rapid charger, side handle, chuck key and a durable contractor bag. The Chuck is cleverly and securely mounted at the bottom just forwarded of the battery compartment. The Super Hawg has two speeds High (0-1550)/Low (0-500). This Hawg can support Steel twist bits, high 5/16″, low 1/2″, Wood bits, Auger bits and Ship Auger bits high/low 1-1/2″, Selfeed bit, high 2-9/16 “, low 4-5/8″, Hole Saw, high 4″ and low 6”. The Control Switch has three positions, Forward, Reverse and Lock. When shifting speeds always make sure the tool is stopped to avoid damaging it. Milwaukee offers a limited 5-year warranty from the original date of purchase against materials and workmanship.
Abby Ullrich (verified owner) –
This drill has so much torque. I would guess it has more torque than most other brand’s corded drills. I got the keyed chuck because I didnt want to be locked in to using only the quick change type bits. I was glad too. On the first job I went on with this drill, I forgot to load my regular cordless drill. I needed to drill a 3/8” hole in a metal electrical enclosure. I had the bits and just chucked them up in this right angle drill. Was a little awkward, but it worked. Would not have been possible with the quick lock chuck version. So keep that in mind.
Savanah Thiel (verified owner) –
Lots of power and compact
Sadie Rempel (verified owner) –
Strong !
Lucienne Bartell (verified owner) –
If you’re an electrician or plumber, this drill was made for you and this package has everything you need! Let’s start with the contractor bag. This is a heavy duty, wide mouth canvas carrying bag that can hold the drill, the side handle, both batteries and the rapid charger with no problem. It’s 23” L x 12” W x 12.5” D. There are six side pockets and a carrying strap that fastens diagonally across the bag. It has to be heavy duty because the drill isn’t called “Super Hawg” for nothing. With the battery and handle, this drill weighs just under 15 lbs. When you’re not working, you could use it to do curls to develop your biceps! :-)The drill is extremely powerful! In fact, it drills holes faster than its corded predecessor but is over 30% lighter. It can drill 100 2- 9/16” holes or 150 7/8” holes per charge. In order to drill holes of this size, the drill comes with a ½” keyed chuck and has a built-in storage slot just above the battery for it. There’s a built-in LED for the times when you’re working in a low-light environment. The motor is capable of 0 – 500 RPM in low gear and 0 – 1,550 RPM in high gear. There’s a gear selector switch on the bottom of the drill near the chuck and in addition to a top handle, there’s a side handle that can be used on either side of the drill.In this package, Milwaukee provides two M18, 6.0AH, REDLITHIUM™ XC5.0 batteries that provide up to 2.5X more run time and recharges than standard lithium and operate down to 0 degrees F. Each battery has a fuel gauge to display the amount of charge remaining. Also provided is a Rapid Charge charger, capable of charging both M12 and M18 batteries. The drill has a 5-year warranty and the batteries have a 3-year warranty. If you want a drill that can handle just about any job you can throw at it, this is the one to have!
Thalia Heaney (verified owner) –
A beast!!! One powerful tool that bores thru a 2×4 board fast on the 3 tests I ran with it. Though heavy, and requiring two hands, it is well designed, and as ergonomic a tool as you could expect given it’s size and weight.. You will get some kickback on occasion, so be prepared. Read the manual. It will give you tips on best ways to handle kickback. It comes with a removable side handle. The handle isn’t clearly mentioned on the box, but it’s there. Love the fact it has a brushless motor for longer life. I haven’t used it near enough to test battery life, but there doesn’t seem to be any slow down after 20-25 minutes of use. The two included batteries are big at 6.0 Ah, so they should last a while before needing to be replaced. The charger will work with these 18 volt batteries as well as the smaller M12 12 volt batteries. A nice contractor bag is included.