Milwaukee 5/8 in. x 6 in. Ship Auger Bit
$14.52
The Milwaukee ship auger bits have a new through center cutting design for improved life in nail-embedded wood. The flutes are coated, which produces a non-stick surface for fast and smooth chip ejection, especially in deep holes. The shanks are also impact rated for added durability and versatility no matter the trade. Ideal for electricians, plumbers, utilities and any trade requiring fast hole drilling in clean or nail-embedded wood.
In stock
Description
The Milwaukee ship auger bits have a new through center cutting design for improved life in nail-embedded wood. The flutes are coated, which produces a non-stick surface for fast and smooth chip ejection, especially in deep holes. The shanks are also impact rated for added durability and versatility no matter the trade. Ideal for electricians, plumbers, utilities and any trade requiring fast hole drilling in clean or nail-embedded wood.
- Steel construction for strength
- Induction-hardened tip provides nail durability
- Coated flutes for fast chip removal
- Impact-rated shank
Additional information
| Weight | .33 lbs |
|---|---|
| Dimensions | 1.25 × 1.25 × 7.50 in |
| Assembled Depth (in.) | 1.2 in |
| Assembled Height (in.) | 7.38 in |
| Assembled Width (in.) | 1.2 in |
| Auger Bit Type | Short Auger Bit |
| Bit Diameter | 5/8 in |
| Bit Length (in.) | 6 |
| Bit Material | High Speed Steel |
| Drill Bit Type | Auger Bit |
| Drill Bit Type(s) Included | Auger Bit |
| Individual/Set | Individual |
| Material Application | Wood |
| Model | 48-13-0623 |
| Self-Feeding | No |
| Shank Diameter | 7/16 in |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (64)
64 reviews for Milwaukee 5/8 in. x 6 in. Ship Auger Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# DW2043 Z
Drill Bits
Model# DW2735P
Drill Bits
Model# FB-005
Drill Bits
Model# DW2046 G
Drill Bits
Model# 48-32-2100
Drill Bits
Milwaukee Selfeed High-Speed Steel Wood Boring Bit Set (7-Piece)
Model# 49-22-0130
Lacey Ankunding (verified owner) –
I had to drill two 3/4″ holes through an EMCO storm door to mount the handle. The bit quickly drilled through the aluminum skin and the particle board. The holes were straight. The aluminum deformed badly, but it was barely thicker than foil.The shank fits a Milwaukee M18 1/2″ keyless chuck.
Shad Reichel (verified owner) –
Used it to drill over 100 holes in pressure treated lumber. I found it makes a rough entry so I used a forstner bit for the first 1/4″ instead. This drill will grab and pull easily through the wood. Leaves a clean exit. I was doing a project where I needed clean ends so using the combination of drill bits was necessary. However this drill bit is fast and saved me a ton of time and arm fatigue. Recommended over the blade bits which always seem to break and make a mess.
Vilma Fadel (verified owner) –
Nice clean hole. Very little splintering.
Sydnee Schmitt (verified owner) –
Drill bit worked great.
Albert Waelchi (verified owner) –
Works as intended.
Colby Padberg (verified owner) –
I am an electrician and a auger bit is a auger bit. the real test comes when you run into a nail. so far so good
June Nolan (verified owner) –
great drill bit. 7/16 hex shanks fits Quik-Lok chuck on Super Hawg drill. Goes through a 2×4 in about 1 second! Excellent!
Seamus Raynor (verified owner) –
Great quality. They last a long time compared to the others that we have used in the past.
Agustin Feest (verified owner) –
was well pleased with this bit, wired complete house, drilled all holes and never had to sharpen.
Aylin Schimmel (verified owner) –
This thing works so well I stopped half way thru my project to write this review!Having to drill thru about 30 floor joist to pull wire thru for an outdoor sauna, I started with an older spade bit and agonized over the first 2 for five minutes. Got this one and they literally drill themselves.No pressure needed, awkward spots no problem, takes less then 5 seconds to get thru a 2x.I highly recommend getting this bit!
Nyasia Zemlak (verified owner) –
drill was sharp and stayed sharp throughout the proect
Stephen Fay (verified owner) –
Works fine , heavier shaft seems to hold up well from bending or breaking
Joe Sanford (verified owner) –
As an electrician, having a 7/8″ auger bit is necessary, the size of 1/2″ conduit. This seemed to be a good fit, and at a good price. Sadly, I have some problems getting auger bits over 7/8″ in the store, so maybe Home Depot should try and consider the sizes needed for plumbing and electrical installations, and have sizes at least through 1″ available IN the store (that means up to 1 3/8″
Jimmy Becker (verified owner) –
Great piece, went through 4×4 end grain “like butter” seriously great tool!
Estella Cormier (verified owner) –
Good clean cuts for the first 50 or so cuts. Not there is a bunch of windings left that are still attached to the studs, beans etc you are cutting through. Their longer versions do the same thing. Milwaukee’s ship augers (with replaceable blade) doesn’t have this problem.
Braeden Hills (verified owner) –
This is the best drill bit for plowing through 2x4s that I have found. Makes it effortless, even through a three board stack on a top plate.
Bryana Schmidt (verified owner) –
Very good tool
Kira Cremin (verified owner) –
Extremely durable. As long as you do not go through to many nails and dull it out.
Oscar Stamm (verified owner) –
Did the job I needed to do effortlessly and quick.
Olga Donnelly (verified owner) –
Fast and precise