Milwaukee 7/8 in. x 6 in. Ship Auger Bit
$20.19
Heavy-duty ship auger bits are for all types of construction. Precision machined for smooth, wobble free boring. Large, wide throat design gives excellent chip clearance from deep holes. Self feeding screw point, with one cutting edge and side lip for fast, rough boring in wood. Hardened cutting edges require less re-sharpening.
Only 10 left in stock
Description
Heavy-duty ship auger bits are for all types of construction. Precision machined for smooth, wobble free boring. Large, wide throat design gives excellent chip clearance from deep holes. Self feeding screw point, with one cutting edge and side lip for fast, rough boring in wood. Hardened cutting edges require less re-sharpening.
- Steel construction for strength
- Induction-hardened tip for added nail durability
- Coated flutes for fast chip removal
- Impact-rated shank
Additional information
| Weight | .42 lbs |
|---|---|
| Dimensions | 7.63 × 1.25 × 1.25 in |
| Assembled Depth (in.) | 1.22 in |
| Assembled Height (in.) | 7.5 in |
| Assembled Width (in.) | 1.22 in |
| Auger Bit Type | Short Auger Bit |
| Bit Diameter | 7/8 in |
| Bit Length (in.) | 6 |
| Bit Material | High Speed Steel |
| Drill Bit Type | Auger Bit |
| Drill Bit Type(s) Included | Auger Bit |
| Individual/Set | Individual |
| Model | 48-13-0873 |
| Self-Feeding | Yes |
| Shank Diameter | 7/16 in |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (64)
64 reviews for Milwaukee 7/8 in. x 6 in. Ship Auger Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# 282303
Drill Bits
Model# DW2535
Drill Bits
Model# DW2542
Drill Bits
Model# DW2043 Z
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# 48-32-2100
Drill Bits
Model# 48-25-2252
Kacey Predovic (verified owner) –
The 7/16 hex is over kill for my purposes but it servers its purpose
Kacie Mueller (verified owner) –
great drill bit. 7/16 hex shanks fits Quik-Lok chuck on Super Hawg drill. Goes through a 2×4 in about 1 second! Excellent!
Elton Pfannerstill (verified owner) –
Works fine , heavier shaft seems to hold up well from bending or breaking
Tad Stracke (verified owner) –
Very good tool
Viva Moore (verified owner) –
Great piece, went through 4×4 end grain “like butter” seriously great tool!
Elna Waelchi (verified owner) –
Works great! This is the second one I have bought (*I lost the first one). I have used it for countless holes and it makes the job way easier!
Cali Von (verified owner) –
This drill bit just seemed to suck you in to the wood. Effortless drilling!!
Jeremie Greenfelder (verified owner) –
Worked great drilling through 2 sistered joist. Combined 4 inches
Barton Rempel (verified owner) –
This drill eats though anything
Adelle Hermann (verified owner) –
This thing works so well I stopped half way thru my project to write this review!Having to drill thru about 30 floor joist to pull wire thru for an outdoor sauna, I started with an older spade bit and agonized over the first 2 for five minutes. Got this one and they literally drill themselves.No pressure needed, awkward spots no problem, takes less then 5 seconds to get thru a 2x.I highly recommend getting this bit!
Cassandra Sanford (verified owner) –
I had to drill two 3/4″ holes through an EMCO storm door to mount the handle. The bit quickly drilled through the aluminum skin and the particle board. The holes were straight. The aluminum deformed badly, but it was barely thicker than foil.The shank fits a Milwaukee M18 1/2″ keyless chuck.
Anais Swift (verified owner) –
I have been using this auger bit in my new FUEL M-18 Hole Hawg, and I don’t even need to apply pressure on it to drill a perfect hole. This bit is strong and sharp, and literally cuts into the wood like butter (even with it full of nails). If you are in plumbing, HVAC or Electrical, this bit is going to save you a lot of time.
Ethyl Howell (verified owner) –
It’s for a 1/2” chuck drill since it’s not on the package
Jalen Kiehn (verified owner) –
Drills through 2x4s like nothing with my Milwaukee brushless compact drill, even in second gear! Great for an electrician!
Evans Mitchell (verified owner) –
Nice clean hole. Very little splintering.
Frederique Kunde (verified owner) –
Did the job I needed to do effortlessly and quick.
Garfield King (verified owner) –
Drill bit worked great.
Dino Schimmel (verified owner) –
Works well, quick, efficient, perfect for drilling holes for pulling wire.
Myrna Schamberger (verified owner) –
As an electrician, having a 7/8″ auger bit is necessary, the size of 1/2″ conduit. This seemed to be a good fit, and at a good price. Sadly, I have some problems getting auger bits over 7/8″ in the store, so maybe Home Depot should try and consider the sizes needed for plumbing and electrical installations, and have sizes at least through 1″ available IN the store (that means up to 1 3/8″
Jermaine Effertz (verified owner) –
It was delivered when it was stated and did it’s job.