Milwaukee #6/#8/#10 Steel Countersink Set (3-Piece)
$26.22
Complete your drilling job effortlessly with the selection of this Milwaukee #8 Countersink Set.
In stock
Description
The MILWAUKEE® SHOCKWAVE™ 3PC Countersink Bit Set features #6, #8 and #10 Countersinks. The pre-drill and countersink bits are designed for use in Milwaukee Drill Drivers. The 1/4″ Quick Change Hex Shanks allow for quick size changes. The 1/8″ Hex drill bit length is adjustable to allow for precise depth control.
- Ideal for pre-drill and countersink
- 9/64″, 11/64″ & 3/16″ Drill Bits
- #6, #8 & #10 Countersinks
- 1/8″ Hex for adjusting drill bit length
- 1/4″ Quick Change Hex Shank
- Designed for use in Drill Drivers
Additional information
| Weight | 0.237 lbs |
|---|---|
| Dimensions | 0.65 × 4.10 × 7.60 in |
| Bit Material | High Speed Steel |
| Drill Bit Type | Countersink |
| Drill Bit Type(s) Included | Countersink |
| Individual/Set | Set |
| Model | 48-13-5003 |
| Number of Pieces | 3 |
| Self-Feeding | Yes |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (46)
46 reviews for Milwaukee #6/#8/#10 Steel Countersink Set (3-Piece)
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2045 G
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# 48-28-1010
Drill Bits
Model# FB-015
Drill Bits
Milwaukee Selfeed High-Speed Steel Wood Boring Bit Set (7-Piece)
Model# 49-22-0130
Drill Bits
Model# FB-007
Drill Bits
Model# FB-005
Drill Bits
Model# 48-20-8852
Kellie Williamson (verified owner) –
Works great
Janelle Koepp (verified owner) –
A high quality drill bit set for drilling and countersinking screws. The tapered bits make driving the screw easier especially in hardwoods. You can easily adjust the bit length which can vary up to about 3/4 inch. Theoretically there are infinite adjustments with that range but the bits are designed so that the most secure points for tightening are at two different lengths. Laser etching the size is a nice feature as is making it possible to do quick changes if you have a 1/4 inch hex. The bits are not replaceable if broken or damaged.
Adrienne Pacocha (verified owner) –
I’m very happy with my new set countersinks.
Clifford Tromp (verified owner) –
Love these. To be honest, I saw these on This Old House and saw how well they worked so I had to try them out. Whats nice is that they can fit right into an impact drill so you dont have to switch drill and switching the bits is super easy. This makes for a tighter and cleaner fit with your screws which I really love. You get three different sizes but I have only used the smallest one. Totally recommend these for those times where you dont want the wood to split!
Dewitt Barrows (verified owner) –
Milwaukee #6/#8/#10 Steel Countersink Set (3-Piece)This is a versatile set of counter sink bits. The 3 pack gives you a #6, #8 and #10 bit. The bit size is laser etched on the hex shaft making it easy to check bit size. With the 1/4 inch hex shank tool change are fast and easy. The counter sink base is attached to the bit / hex shaft by 2 grub screws. By loosening the grub screws you can adjust how deep you want to drill the tap hole before the counter sink hole. These bits are some of the sharpest I have owned.
Ryann Bergnaum (verified owner) –
This is a great set of countersink drill bits. I used st scoff at using these as I was able to achieve the same results by using two different drill bits, one for the shank of the screw and a larger bit for the head. The disadvantage was it required changing bits and making sure I was aligned properly TWICE on each hole. Now that I have this set of bits, it’s one and done.The set comes in widely used bit sizes to meet very nearly all of your fastening needs. The bits are of good quality and they are tapered to accommodate the shape of wood screws (something you don’t get with normal drill bits).The one CON I have is that the #10 bit does seem to bend easily. I accidentally struck the 2×4 I was drilling with the bit installed in the drill and I damaged the bit. It now has a small wobble. My bad for not being careful. This isn’t an issue if you are careful with the bit installed.