Milwaukee 11/16 in. x 18 in. Shockwave Lineman’s Impact Auger Bit
$31.49
Reduce your work time and make your task easier with the selection of this exclusive Milwaukee #53 Shockwave Linemans Impact Auger Bit
In stock
Description
The Shockwave Lineman’s Impact Auger Bits are engineered to deliver cleaner, faster holes in wooden utility poles. They feature a single spur design, which scores the edge of the hole, creating a cleaner finish that allows bolts to slide through without resistance. The bits are coated with a reinforced anti-friction PTFE coating for overall smoother drilling and easier removal of the bit from the pole. The aggressive feed screw and cutting edge pull the bit through the material while the optimized wide flute geometry quickly ejects the chips to clear the hole and reduce clogs, leading to overall faster drilling speeds.
- Engineered for the power utility Lineman to drill cleaner, faster holes in wooden utility poles
- Single spur design scores the hole for a cleaner finish
- Reinforced anti-friction PTFE coating for overall smoother drilling
- Optimized wide flute geometry for faster chip ejection
- Aggressive feed screw and cutting edge for faster drilling speeds
- 7/16 in. hex shank for quick connection into 7/16 in. quick connect chucks
- Available in 18 in. and 24 in. lengths
- Designed for drilling into wooden utility poles, recommended for clean wood only
- Solid stemmed core for added strength
Additional information
| Weight | .733 lbs |
|---|---|
| Dimensions | 1.18 × 1.18 × 19.25 in |
| Assembled Depth (in.) | 18 in |
| Assembled Height (in.) | 18 in |
| Assembled Width (in.) | 11/16 in |
| Auger Bit Type | Long Auger Bit |
| Bit Diameter | 11/16 in |
| Bit Length (in.) | 18 |
| Bit Material | Steel |
| Drill Bit Type | Auger Bit |
| Drill Bit Type(s) Included | Auger Bit |
| Individual/Set | Individual |
| Material Application | Wood |
| Model | 48-13-6705 |
| Self-Feeding | Yes |
| Shank Diameter | 7/16 in |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (15)
15 reviews for Milwaukee 11/16 in. x 18 in. Shockwave Lineman’s Impact Auger Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# FB-003
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# DW2542
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# 282303
Drill Bits
Model# 49-56-0247
Drill Bits
Model# DW2162
Drill Bits
Model# DW2043 Z
Kaleb Dibbert (verified owner) –
I got this bit to use for drilling through studs for electrical wire runs. The length is long enough to reach through to spaces that are too far away for most bits which is helpful, but also long enough that it doesn’t fit between 16″ O.C. studs. (Especially with the drill attached.) It is quite tough and can handle use with an impact drill. It is very aggressive in use, however, and the pilot auger pulls it into wood rapidly enough that it sometimes splits the stud. The bit can’t always cut at the rate that it is pulled into the wood. I’m keeping this with my drilling tools but I only use it when I need a long reach and the wood is heavy enough to not be damaged by the bit’s aggressive behavior.
Garrick DuBuque (verified owner) –
Works great, drills through the the poles fast and easy!!
Waylon Kuhlman (verified owner) –
Great bit!
Efrain Kuphal (verified owner) –
i drilled through an 8″ pylon with a 2″x6″ on each side in 10 seconds with my 7/16 impact wrench. Also the whole was super clean
Otilia Olson (verified owner) –
Ive been drilling holes thru telephone poles for 30 years and this is the fastest, sharpest, cleanest drill bit I have ever owned
Conner Zboncak (verified owner) –
I have this and a 5/8th version as well. I used the smaller one to make a hole for an outside outlet. Hole as clean and it went through like butter. There is a specific chuck that Milwaukee sells to use for these bit types but it will work just fine in a regular drill. The coating the bit aids in drilling and reduces friction. One other feature I found useful is the starting tip on the end of the bit. It keeps the bit from walking and secure the beginning of drill hole.
Tiana Schaefer (verified owner) –
GREAT tool
Milford Altenwerth (verified owner) –
This thing is bad to the bone. I put it on a Dewalt DCF898b 20v 7/16” impact and I can drill holes through 12-inch to 14-inch telephone poles in literally 8 to 10 seconds. I’ve drilled over 40 holes on a pole transfer job and the bit shows no sign of dulling.
Camden O’Conner (verified owner) –
Excellent tool
Mozell Doyle (verified owner) –
The bit was worth it. I received it timely and will use the web cite again.
Daphne Borer (verified owner) –
Never fails have had one for a year that still work pretty good! However you can feel the difference with a band new one!
Lizeth Lesch (verified owner) –
Best drill bit I’ve ever owned. Works amazingly well. A must for any lineman
Rickey Beier (verified owner) –
Extremely fast and clean cutting auger bit.
Joany Ebert (verified owner) –
Drill bit exceeded expectations. Works just as good as shown in videos.
Anthony Marquardt (verified owner) –
Great bit!