Milwaukee 1/4 in. x 6 in. 2-Cutter SDS-Plus Carbide Bit
$7.84
Milwaukee SDS-Plus Carbide Bit is used with concrete screws as a matched tolerance system. Breaks concrete quickly for faster penetration.
In stock
Description
Milwaukee M/2 2-Cutter SDS-Plus Rotary Hammer Drill bits provide up to 30% faster drilling speeds and up to 20% more holes per charge in cordless rotary hammers. Breaker Point pulverize the material more effectively resulting in up 30% faster drilling speeds compared to competitive SDS-Plus drill bits. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Additionally, M/2 features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2 2-Cutter drill bit line provides the ideal solution in brick, block, and concrete for cordless and corded rotary hammer users.
- Breaker points for up to 30% faster drilling speeds
- Variable flutes for up to 20% more holes per battery charge in cordless rotary hammers
- Rebar guards for increased durability in hard aggregate
- Reinforced Flutes to avoid bit breakage
- Centering tip for exact spot drilling
- Wear mark indicators to indicate end of life
- ANSI specified to fit common anchors
Additional information
| Weight | .13 lbs |
|---|---|
| Dimensions | 0.13 × 1.75 × 10.00 in |
| Assembled Depth (in.) | .25 in |
| Assembled Height (in.) | 6 in |
| Assembled Width (in.) | .25 in |
| Bit Diameter | 1/4 in |
| Bit Length (in.) | 6 |
| Bit Material | Carbide |
| Drill Bit Type | 2-Cutter |
| Drill Bit Type(s) Included | Hammer Drill Bit, Masonry Bit, Percussion Bit |
| Individual/Set | Individual |
| Material Application | Brick, Concrete |
| Model | 48-20-8231 |
| Self-Feeding | No |
| Shank Diameter | 25/64 in |
| Shank Style | SDS Plus |
| Tools Product Type | Power Tool |
Reviews (30)
30 reviews for Milwaukee 1/4 in. x 6 in. 2-Cutter SDS-Plus Carbide Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2535
Drill Bits
Model# DW2162
Drill Bits
Model# 48-25-2252
Drill Bits
Model# DW2046 G
Drill Bits
Model# 282269
Drill Bits
Model# FB-005
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Floyd Bruen (verified owner) –
Was used to anchor down wall plates to a basement floor. No issues with it very pleased and looking forward to using it again
Breanna Bednar (verified owner) –
Just for small job i can figure out my hummer drill with this bit. I like it.
Daisha Keeling (verified owner) –
Very nice and bright
Randal Bruen (verified owner) –
took a little time to chuck it up with a older drill
Matteo Graham (verified owner) –
This bit drilled in amazingly fast through fully cured concrete with my cordless sds plus drill. Will definitely stick with these bits from now on. Made in Germany.
Dominic Ullrich (verified owner) –
No assembly required. Using a Hilte drill motor with an sds plus chuck, bit cut thru concrete easily.
Benny Brown (verified owner) –
It lasted a good while
Jerome Lockman (verified owner) –
It saved my work day many times
Nyah Boyer (verified owner) –
Awesome and reliable tool
Karli Durgan (verified owner) –
Very pleased with this bit