Milwaukee 5/32 in. SHOCKWAVE Carbide Hammer Drill Bits (5-Pack)
$20.97
Accomplish your drilling work with the selection of this excellent Milwaukee #37 SHOCKWAVE Carbide Hammer Drill Bits durability.
In stock
Description
The Milwaukee 5/32 in. SHOCKWAVE Carbide Hammer Drill Bit 25-Pack uses sharpened carbide to deliver up to 5X longer life in concrete and up to 2X faster drilling into masonry materials. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick and block. The carbide-tipped masonry drill bits’ wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a 1/4 in. Hex Shank, Milwaukee SHOCKWAVE Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers.
- Durable carbide tip for longer life in concrete and hard aggregate
- Sharpened carbide edges for faster starts in concrete, brick and block
- Precision ground carbide tip for less bit walking
- Wide flute design removes dust faster reducing heat and delivering more holes per charge
- Ideal for concrete, brick and block
- 1/4 in. hex shank for added tool versatility
- Available in sizes up to 1/2 in.
Additional information
| Weight | 0.077175 lbs |
|---|---|
| Dimensions | 0.16 × 1.87 × 8.98 in |
| Assembled Depth (in.) | 6 in |
| Assembled Height (in.) | .25 in |
| Assembled Width (in.) | .25 in |
| Bit Diameter | 5/32 in |
| Bit Length (in.) | 6 |
| Bit Material | Carbide |
| Drill Bit Type | Hammer Drill Bit |
| Drill Bit Type(s) Included | Hammer Drill Bit, Masonry Bit, Percussion Bit |
| Individual/Set | Set |
| Material Application | Brick, Concrete |
| Model | 48-20-9155 |
| Self-Feeding | No |
| Shank Diameter | 1/4 in |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (32)
32 reviews for Milwaukee 5/32 in. SHOCKWAVE Carbide Hammer Drill Bits (5-Pack)
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-20-8856
Drill Bits
Model# 48-25-2122
Drill Bits
Model# 49-56-7010
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# FB-003
Drill Bits
Model# 49-56-0247
Drill Bits
Model# DW2043 Z
Drill Bits
Model# DW2162
Emmanuel Hermiston (verified owner) –
Used them on a brick exterior wall. They start working really great but wear down after 10-12 holes. Having the 5 pack was good. I would’ve hated going back for a second or third bit.
Letitia Okuneva (verified owner) –
Designed for impact or hammer drills, these drill bits are engineered to drill through concrete, block or brick. You will get 5x the life from these bits and their design makes them twice a fast as other bits (cuts your drill time in half). They are not recommended to be used in an impact driver for concrete. An impact driver can be used if you are drill brick or block. Great for high speed in a hammer drill for concrete, brick or block.These bits are 1/4″ by 4″ by 6″ and come 5 to a pack.
Geoffrey Nienow (verified owner) –
This 5 pack 5/32″ hardened carbide drill bits from Milwaukee, is perfect for masonry and harder surfaces, such as concrete, brick, block and granite rock. It is the perfect concrete carbide drill bits for all concrete / masonry use. The hardened steel bit is sharpened for easy starting into hard masonry use. Drills easily into brick, block and tested on harder granite stone material, where this bit didn’t wobble, and easily drilled a clean hole. The long shank is a added convenient feature making this product easy to use.
Herbert Monahan (verified owner) –
this bit did the job! i had previously purchased three different brands of bits for concrete that burned on the first hole. 1 of these completed five holes.
Junius Parisian (verified owner) –
These 3/16″ Milwaukee Hammer Drill bits are great. I really like that the shanks are hexagonal. They locked very nicely into my 3 jaw chuck. I didn’t need to murder the chuck key to get it tight enough to not spin. I had some very hard fired bricks to try them on. This little bit zipped right into the brick with no issues. The bits are long enough to go totally through a brick like this. I experienced zero flex on the shaft while drilling. These smaller bits are sometimes a little fragile when side torque is applied. Not this one. It was great. I have a new favorite hammer drill bit.
Raina McCullough (verified owner) –
These bits worked great. Less susceptible to dulling out the tip than the internet no-named brands. Used them in my handheld impact drill for a quick job.
Conrad Borer (verified owner) –
This 5 pack of carbide tipped hammer drill bits is intended for concrete, cinder block, or brick. My previous drill bits intended for this made by another company struggled to get through brick. I attached one to my hammer drill and gave it a try. I’m not sure the hammer function engaged except for brief spurts, as the bit made it’s way easily through the brick. I can’t speak to longevity, as I only just got these. However, they seem to be well made, and well packaged. They are made in China.
Orrin Rutherford (verified owner) –
You can’t go wrong with a Milwaukee product. These bits are hex head bits that can be mounted in any chuck that that uses that head and even has a locking kerf. They are well made and fluted for quick material removal. They are carbide tipped for durability. It is a fast cutting bit. It is rated to drill several different hard materials. This model carbide hammer drill bit (48-20-9162) is six inches long.
Devon Hintz (verified owner) –
Excellent product,wish they would have come in a smaller package
Parker Larkin (verified owner) –
Good bith. Exceed my expectation.thank you
Javonte Durgan (verified owner) –
This is my review of the Milwaukee 1/4 inch shockwave carbide hammer drill bits 48-20-9162 designed for use in impact and hammer drills. I just had the opportunity to try these bits while replacing some drain lines that had to be secured to concrete columns. I used the bits in a cordless hammer drill and they did the job. Drilling was fast and effortless, The bits did not walk when starting a hole. After installing over 25 straps (50) holes I was still using the same bit. I would recommend these. If I need other size bits for concrete I will buy this brand.
Jamaal Bruen (verified owner) –
I really like these Milwaukee 5/32″ hammer drill bits. They are made from hard steel. Nice and long. In this series the hexagonal shanks are all the same size. They shaft locks into the chuck really well. No slipping. Sometimes bits this small are a bit fragile and will break pretty easily. I saw no evidence that this one would have that issue. It zipped right through a hard fired brick with just normal pressure. I will buy Shockwave when and if I wear these out.