Milwaukee 4.75 in. Mini Flush Cutters
$13.97
In stock
Description
The MILWAUKEE Mini Flush Cutters produce consistent, precise cuts through thin wires and cable ties. The spring-loaded cutter design helps to reduce user fatigue while using the tool. The slim profile allows for better user access to tight spaces. Over-molded grips on the flush wire cutter will not peel after heavy use or exposure to job site conditions. The cutters are built with machined precision and feature rust protection to work harder for longer.
- Spring Assisted
- Light Weight
- Overmolded Grips Will Not Peel
- Machined Precision
- Rust Protection
- Includes: (1) Mini Flush Cutters
Additional information
| Weight | .13 lbs |
|---|---|
| Dimensions | 0.70 × 3.50 × 7.36 in |
| Cut Type | Flush Cut |
| Hand Tool Type | Cutting Pliers |
| Handle Length (in.) | 4.75 |
| Handle Material | Plastic |
| Individual/Set | Individual |
| Jaw Capacity | .2 in |
| Jaw Tip Size | .5 in |
| Joint Type | Fixed Joint |
| Model | 48-22-6105 |
| Number of Pieces | 1 |
| Tools Product Type | Hand Tool |
Reviews (52)
52 reviews for Milwaukee 4.75 in. Mini Flush Cutters
Only logged in customers who have purchased this product may leave a review.
Related products
Pliers
Model# 357
Pliers
Model# D228-8-SEN
Pliers
Model# 430
Pliers
Model# 11057
Pliers
Model# GLS3
Pliers
Model# D213-9NESEN
Pliers
Model# 460
Stephania Gibson (verified owner) –
These cutters are handy to have in the tool box. They are very sharp and had no problem cutting through some hard plastic I used to test them out with. They are comfortable in the hand and easy to squeeze. One thing I noticed vs. other brands of similar tools I have used in the past is that the Milwaukee mini flush cutters do not have a locking mechanism. That means that the spring keeps the jaws always open. I would prefer something to keep the jaws closed or protected as they are very sharp, and I could see easily getting cut if one was digging around a tool bag. The nice thing about the sharp jaws is that they make a very clean cut.
Camilla Mills (verified owner) –
Jaw tips were bending already. Not very strong.
Wilfredo Lowe (verified owner) –
good snips arrived quick. really sharp and cut flush
Stuart Bergnaum (verified owner) –
Flush cuts. They with great if you use a lot of zip ties
Asa Feeney (verified owner) –
Great investment for a technician. Pricise and compact for the jobs I do.
Mitchel Hammes (verified owner) –
Sharp ! Worked very well. Would recommend and buy again. I used it to cut electrical wire in a tight area. Made in Taiwan
Gloria Rempel (verified owner) –
These were ordered online and shipped to my home without issue.these cutters work fantastically. I’ve been using these on various projects and these have worked well with cutting wire, wood and cable ties. The grips stay in place just fine and the spring action return on the cutters is nice and smooth without hang-ups or sticking. I would highly recommend this product as a trusty addition to any tool bag, workbench, or tool box.
Shea Conroy (verified owner) –
I consider myself to be part of the Red Tool Tribe owning many of thei power tools and hand tools. Their creed is “Nothing But Heavy Duty”, unfortunately that doesnt alway apply to their hand tools, and this is one of them that doesnt. I own Milwaukee hand tools that rival german made tools at a significant discount but this one is no where close especially in ergonomics. The grip is only 3/8” thick so if you need any leverage on them or if youre using them for long periods of time you will get uncomfortable. That being said for the price these are exactly what I expected and are otherwise of high quality. The one thing I would much prefer is a locking closure, with the sping assist these are always open. I’ll probably try to find a pouch for them because they’re sharp enough to jab you or get damaged if they’re floating around a drawer or tool box
Oscar Christiansen (verified owner) –
Was looking for a smaller, more precise pair of cutters than my 8″ diagonals. These are nothing terribly fancy, but serve the purpose well, and especially at the price.Cutting edges mate perfectly, and will cut something as thin as a piece of paper, far exceeding my needs in that regard. Comfortable, slip-resistant handles and the simple spring mechanism are both more than adequate.
Louie Altenwerth (verified owner) –
This is another great product from the people at Milwaukee. These mini cutters are spring assisted to open and close easily. These would be good for cutting zip ties or any small wire. This could be used by crafts people, hobbyist or flower arranger who need a small flush cutter. These would also work nicely for electronic or small cable work. These fit nicely into smaller hands and are very compact and can be taken anywhere.
Nadia Leuschke (verified owner) –
Excellent
Betsy Schmeler (verified owner) –
Milwaukee 4.75 in. Mini Flush Cutters are perfect for making fine cuts in tight places Milwaukee’s Mimi Flush Cutters (model # 48-22-6105) are perfect for making precise, clean cuts on small wires, and getting into tight places, like cutting a zip tie. The blades are sharp. The spring loaded handle makes repeated cuts easy. And the grips, though thin, are comfortable for the light work intended. As with many mini cutters, they are small (see pics of them in my average sized hand). And there’s no latch or clasp to hold them closed when not in use. So be careful reaching into your tool bag, or better yet give them their own pocket. Too soon to tell, but they feel like they should last a long time, backed up by a lifetime warranty.
Lonny West (verified owner) –
Small and sharp. Perfect for cutting in tight places.
Verda Hermiston (verified owner) –
The Milwaukee Mini Flush Cutters is the perfect tool when you are bundling wires with zip ties. The cutters allow you to get a close clean cut on the excess zip tie for a neat professional look.
Waino Ratke (verified owner) –
I work on old trucks and dabble in electronic and low voltage wiring. I like the slightly over sized handle it sits nicely in your hand. I was looking for a tool that i could easily cut one wire where my diagnol cutting plier head was too bulky, this was a perfect solution. These work great on all the wires I’ve used them on so far and would recommend them to anyone.
Astrid Stanton (verified owner) –
They’re pretty good. I’ve used better European made ones that cost more, but these are probably the ones I’d tell a friend to get. They felt better in the hand to me than the cheaper options did and the construction seems to be more durable. This pair comes with a limited lifetime warranty, but this tools should be considered a consumable in my option.The cutters did a good job trimming up to 18 AWG copper wire, zip ties (some manufacturers say not to do this), and component leads. I even used them for hangnails and cleaning up my cuticles. The cuts where all nice and clean. These are definitely staying with my soldering iron.
Lauryn Windler (verified owner) –
Perfect for CAT5/6 work. Cutting blades are harder than most mini flush cut pliers. Must have!
Zola Renner (verified owner) –
Item was as expected
Mateo O’Reilly (verified owner) –
I just received this 4.75 in. Mini Flush Cutter, by Milwaukee, for working with network wiring and circuit board repairs. This little side cutter is a real jewel. I can get really close to excess wire after soldering them into a circuit board, cutting out small components, as well as cutting wire ends on network cables I have built up. With the flush cut design, there is no bevel to keep the cut away from the surface and also gives me the option of resharpening them if I am in a bind. Living 18 miles the other side of nowhere, tools I get must be very versatile and sturdy. It’s a long drive to obtain a replacement. The only thing I would like to see on this jewel is a locking lever to keep them closed in my network tool pouch. But a wire tie is filling that task now. Happy face here!
Eladio Mitchell (verified owner) –
works very good to put small wires inside panels it is very sharp as well I recommend buying if you do work and panels or electrical work or even cars