Milwaukee 1/2 in. Drive 24 in. Breaker Bar
$49.97
In stock
Description
The Milwaukee 1/2 in. Drive 24 in. Breaker Bar has an alloy steel construction forged for strength. This ratcheting breaker bar has a 180° swivel head for use in multiple angles and an ergonomically designed handle for comfort. The chrome plated finish provides durability and resistance to corrosion. The 1/2 in. Drive 15 in. breaker bar comes with a lifetime guarantee.
- 180° pivoting head for multiple angles of use
- Forged strength
- Chrome plated durability
- Rust protection
- 24 in. breaker bar allows users to break stubborn bolts
- Lifetime guarantee
Additional information
| Weight | 2.9 lbs |
|---|---|
| Dimensions | 2.15 × 1.74 × 26.93 in |
| Assembled Depth (in.) | 1.25 in |
| Assembled Height (in.) | 24.25 in |
| Assembled Width (in.) | 1.5 in |
| Color Family | Silver |
| Drive Size | 1/2 in |
| Features | Low Profile |
| Hand Tool Type | Ratchet |
| Handle Length (in.) | 24.25 |
| Individual/Set | Individual |
| Material | Sand |
| Model | 48-22-9013 |
| Number of Pieces | 1 |
| Ratchet/Breaker Bar | Breaker Bar |
| Tools Product Type | Hand Tool |
| Tooth Count | 0 |
Reviews (27)
27 reviews for Milwaukee 1/2 in. Drive 24 in. Breaker Bar
Only logged in customers who have purchased this product may leave a review.
Related products
Ratchets & Sockets
GEARWRENCH 3/8 in. and 1/2 in. Drive SAE Hex Bit Socket Set (10-Piece)
Model# 80579
Ratchets & Sockets
GEARWRENCH 3/8 in. Drive Metric 12-Point Standard Socket Set (14-Piece)
Model# 80560
Ratchets & Sockets
Model# 80581
Ratchets & Sockets
GEARWRENCH 3/8 in. Drive Metric 6-Point Deep Socket Set (14-Piece)
Model# 80554
Ratchets & Sockets
GEARWRENCH 1/4 in. Drive Metric Hex Bit Socket Set (6-Piece)
Model# 80321
Ratchets & Sockets
GEARWRENCH 3/8 in. Drive Metric 6-Point Standard Socket Set (14-Piece)
Model# 80552
Ratchets & Sockets
Model# 80565
Ratchets & Sockets
Model# 80322
Robert Runolfsdottir (verified owner) –
It’s a breaker bar, haven’t pushed it to its full potential but it works
Lonie Lebsack (verified owner) –
I put an 1 1/8th socket on this bad boy and it turned a bolt that had been a nightmare to budge before. I had to use a two foot monkey wrench with a length of galvanized pipe cheater to do it the first time. That was very awkward and the job turned out to be a huge hassle and a knuckle buster to boot. But the leverage and the swivel head on the Milwaukee took that bolt OFF (and properly tightened it) like that bolt was made of cheese (be careful because it would be very easy to brake off a lug nut or over tighten something very easily) I couldn’t believe how much easier it was to accomplish something that was so hard before; trying to hold a two foot wrench AND a cheater bar AND also trying to hold the mowing deck steady all at one time was a real pain. But it was a breeze with the right tool, and the strain being put on the bar didn’t even seem like it was stressing the bar AT ALL. It preformed so effortlessly that I now have the confidence that the Milwaukee will take a lot of abuse and torque with no problem.
Candace Kozey (verified owner) –
With a lifetime guarantee you will not regret purchasing this product. Most of my breaker bars have a round handle and I had some doubts about Milwaukee’s design with a flattened area where one’s hand will grip the bar. Once I tried it my doubts went away. It feels comfortable in my hand. The 1/2 inch drive has a pin detent to keep the socket attached. I found it held the socket well but still allowed me to remove the socket without significant force. The head swivels freely allowing use at any angle needed. The twenty four inch length is perfect for added leverage against stuck fasteners. I was able to apply a good amount of force to the breaker bar and it showed no signs of stress.
Lawson Hartmann (verified owner) –
STRONG: HIGH QUALITY; USEFUL for REMOVING STUCK NUTS — The Milwaukee 1/2 in. Drive 24 in. Breaker Bar is a handy tool to have on hand if you need to remove a nut that just won’t come off with a regular ratchet, e.g., lug nuts that have been over tightened. Anyone who works on older automobiles will appreciate this tool. After applying penetrating oil to the nut, the 24″ length should provide sufficient leverage to remove it. The tool comes with a handy attachment for hanging it up when not in use. The front of the hanger can be detached so that the bar can be removed and then reinserted for rehanging the bar. The tool is made in Taiwan and comes with a lifetime warranty.
Zella Bernier (verified owner) –
Perfect fit and finish.
Damion Schaden (verified owner) –
It’s good breaker bar and very sturdy. Love it.
Jamie Raynor (verified owner) –
Impressed with the quality of the 24 inch Milwaukee 1/2 drive breaker bar. It is rare that I recommend tools that are not manufactured in the USA, but this is one of the exceptions. Would definitely recommend. One will not be disappointed.