Milwaukee 6-1/2 in. x 40-Tooth Fine Finish Circular Saw Blade
$19.97
In stock
Description
Milwaukee’s wood cutting, fine finish blades provide cleaner cuts and cutting efficiencies to improve your productivity. An ATB tooth pattern minimizes tearout in the cut material. An anti-friction coating keeps the blade cool while cutting and resists corrosion and gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. Laser cut vibration slots minimize wobble and warping during use. A thin kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.
- Anti-friction coating
- Laser cut from sheet steel
- Polymer filled vibration slots
- Alternate-tooth bevel (ATB) pattern
- Cobalt infused tungsten carbide
- Thin kerf blade
- Optimized for both cordless and corded tools
- 40-tooth; 5/8 in. arbor hole with diamond knock-out
- Great for use with: softwoods, hardwoods, malamine, MDF, veneered plywoods, wet lumber, treated lumber and laminated woods such as plywood, OSB, LVL, PSL, LSL and OSL
Additional information
| Weight | .359 lbs |
|---|---|
| Dimensions | 0.14 × 9.53 × 7.95 in |
| Arbor Size | 5/8 |
| Color Family | Silver |
| Material Cut | Wood |
| Model | 48-40-0622 |
| Number in Package | 1 |
| Number of Teeth | 40 |
| Power Tool Accessory Type | Circular Saw Blade |
| Saw Blade Diameter (in) | 6-1/2 |
| Saw Blade Material | Carbide |
Reviews (76)
76 reviews for Milwaukee 6-1/2 in. x 40-Tooth Fine Finish Circular Saw Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Blades
Milwaukee 6 in. 5 Teeth per in. Wood Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5035
Saw Blades
Model# D1040X
Saw Blades
Model# D0740R
Saw Blades
Model# DW3106
Saw Blades
Milwaukee 12 in. 5 TPI Pruning SAWZALL Reciprocating Saw Blades (5-Pack)
Model# 48-00-1303
Saw Blades
Milwaukee 8 in. 8/12 Teeth per in. Mutli-Material Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5093
Saw Blades
Model# D1244X
Saw Blades
Milwaukee 12 in. 8/12 TPI. Multi-Material Cutting SAWZALL Reciprocating Saw Blades (5-Pack)
Model# 48-00-5094
Daisha Hodkiewicz (verified owner) –
This blade is SHARP. I am using it on a DeWalt 20 Volt battery saw and it slices through material with almost no effort. I got it for use in thin material like plywood and it does a great job with minimal splintering. It tracks straight and has a very narrow kerf. I have always bought top quality blades for use on my portable saw since it has less power than a corded saw. This blade seems to be as good or better than the other blades I have been using. It has relief slots to keep it from warping when it gets hot and has a nonstick/low friction coating. I am just glad that more manufacturers are coming out with 6 ½” blades for battery saws. Since this blade did so well in plywood I tried it out on 2×6 Douglass fir and it went through it without a hitch. I normally use a worm drive saw for framing work and I am either going to get the 7 1/4” version for my big saw or use the 6 ½” blades on the worm drive. Since these blades have a diamond knockout I could easily install them on a full size saw and only lose about 3/8” of cutting depth.
Whitney Gerlach (verified owner) –
Excellent saw blade, cuts like it’s going through butter.
Wilson Rosenbaum (verified owner) –
Good
Maximillia Cole (verified owner) –
Would definitely purchase again worked as expected!
Autumn Wehner (verified owner) –
It is what it says it is,
Tiara O’Kon (verified owner) –
The fine teeth on this blade made cutting trim perfect, using my battery operated portable saw!
Mafalda Kshlerin (verified owner) –
I’m a trim carpenter for the past twenty years. One of the best blades for the money. I have tried a lot of them. Great product.
Adonis Veum (verified owner) –
The saw has definitely met my expectations.
Gene Konopelski (verified owner) –
I needed new blades for my small cordless circular saw and thought the Milwaukee blade would be worth a try. The description of a fine finish 36 tooth blade made me wonder about the “fine finish” performance that this blade would produce. I have to admit, I was pleasantly surprised. I immediately bolted it onto my saw and tried it on some scrap pieces of trim that I had. These pieces were already finished, so I thought that would be a good test for the “fineness”. On the ¾” quarter round, it did a nice job but there were some very small splinters chipped out. You really had to look to see them and they could have been covered with a little stain and would never be noticeable. Next I tried the blade on a piece of 5” baseboard that was also finished. The same for this piece, small pieces splintered out. I then did what I frequently do with this type of wood and taped the line where I was going to cut with painters tape. That took care of the splintering issue and the pieces looked great. The saw went through it smoothly and easily.I then thought I would try it on a 2” X 4”. It went through the board very easily and left a very nice cut. There was also a little soft wood splintering on the end. It didn’t matter on this piece, as it was going into framing for a wall. I was very happy with this cut also.I love these little cordless saws, as I frequently need to cut only a piece of two, and dislike dragging out a long extension cord for the bigger power saw and really don’t like getting out my miter saw on a stand if I don’t have to. A lot of my work is at remote locations anyway and there may be electrical service nearby, or there may not be. This little blade does the trick and I will definitely buy more of them.
Sam Toy (verified owner) –
Great blade, had a ton of oak to cut and it held up well.
Emmet Wiza (verified owner) –
This is a first rate saw blade. With 60 teeth, it is most often thought of as a plywood blade. But I wanted to try it on maple, wenge, padauk, and purpleheart. I was making some end grain cutting boards and needed very smooth cuts on the edges for my glue ups. I had to cut just a bit off all the edges to straighten the boards, as shown in the photos. The blade performed very well. The cuts, even on the wenge (which is a very hard wood) was clean and crisp and allowed my glue ups to go without issue. Maple can also be a problem at times as I have had saw blades chatter when finishing the cut. That did not happen with this blade. Very smooth and very precise.
Bailee Mayer (verified owner) –
MIlwauki saw blades always give me good service and stand up well, even with poor quality wood products. I just use as directed and keep them sharp. I use the fine finish blades for MDF and Melamine to get a great cut for shelves and such, no sanding required. These blade are also coated with something like an anti-stick layer that keeps them from gumming up like uncharted blade sometimes do with laminates and rough plywood.
Noe Stroman (verified owner) –
Impressed very well pleased thanks for asking
Queenie Beer (verified owner) –
Very clean cut with extremely low vibration and noise.
Sandy Kassulke (verified owner) –
Smooth and accurate cutting for my circular saw. The fine cuts really give wood a nice finish. I have yet to try it on other material but it rips through heavy duty lumber easily.
Maximillian Willms (verified owner) –
Good blade! Lots of 4×4 cuts and still in good shape.