Milwaukee 7-1/4 in. x 60-Tooth Ultra Fine Finish Circular Saw Blade
$19.97
In stock
Description
Milwaukee’s wood cutting, ultra-fine finish blades provide a smooth finish and cutting efficiencies to improve your productivity. A High-ATB tooth pattern provides a superior finish with minimal tearout in the cut material. An anti-friction coating keeps the blade cool while cutting and resists corrosion and gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. Laser cut vibration slots minimize wobble and warping during use. A thin kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.
- Anti-friction coating
- Laser cut from sheet steel
- Polymer filled vibration slots
- High alternate-tooth bevel (ATB) pattern
- Cobalt infused tungsten carbide
- Thin kerf blade
- Optimized for both cordless and corded tools
- 60-tooth; 5/8 in. arbor hole with diamond knock-out
- Great for use with: softwoods, hardwoods, malamine, MDF, veneered plywoods, paneling and moldings
Additional information
| Weight | .44 lbs |
|---|---|
| Dimensions | 0.14 × 7.95 × 10.39 in |
| Arbor Size | 5/8 |
| Color Family | Silver |
| Material Cut | Wood |
| Model | 48-40-0730 |
| Number in Package | 1 |
| Number of Teeth | 60 |
| Power Tool Accessory Type | Circular Saw Blade |
| Saw Blade Diameter (in) | 7-1/4 |
| Saw Blade Material | Carbide |
| Tools Product Type | Power Tool |
Reviews (75)
75 reviews for Milwaukee 7-1/4 in. x 60-Tooth Ultra Fine Finish Circular Saw Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Blades
Model# DW3795H
Saw Blades
Model# D0740R
Saw Blades
DEWALT Bi-Metal Reciprocating Saw Blade Set (15-Piece) with Tough Case
Model# DW4890
Saw Blades
Milwaukee 9 in. 14 Teeth per in. Medium Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5187
Saw Blades
Milwaukee 9 in. 18 Teeth per in. Medium Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5188
Saw Blades
Milwaukee 44-7/8 in. 18 TPI Bi-Metal Deep Cut Portable Band Saw Blade
Model# 48-39-0520
Saw Blades
Milwaukee 12 in. 5 TPI Pruning SAWZALL Reciprocating Saw Blades (5-Pack)
Model# 48-00-1303
Saw Blades
DIABLO 10 in. x 80-Teeth Non-Ferrous / Plastic Cutting Saw Blade
Model# D1080N
Thad Kshlerin (verified owner) –
The saw has definitely met my expectations.
Jaron Ebert (verified owner) –
Yes so much power for a battery operated saw! I’m very happy
Cindy Nicolas (verified owner) –
I used it in the M12 battery powered circular saw and it made a good, clean cut.
Burley Nolan (verified owner) –
These new blades from Milwaukee are a great quality and an awesome price. The alternating top bevel teeth on this one aren’t quite as steep an angle as the larger 10″ and 12″ blades of the same series, but they still help provide a clean cut while avoiding tearout.The anti-friction coating works really well and I haven’t noticed it rubbing off on any of my workpieces either. This blade is significantly cheaper with similar performance to the other 36T blades I was using for my Milwaukee M12 FUEL circular saw – I’m glad to see them jumping into manufacturing high quality blades to go with their tools.
Jerome Gleichner (verified owner) –
No. I needed a 3in blade.
Izabella Schumm (verified owner) –
Good
Alva Runolfsdottir (verified owner) –
Top quality product
Kris Cruickshank (verified owner) –
This drill has been excellent to use in my glass shop every day! It will not let you down!
Jarred Erdman (verified owner) –
The blade is great. It fit perfectly on my m12 circular saw. It cuts great.
Stanton Metz (verified owner) –
The blade has a uniform coating; lies flat and is well-balanced at no-load running speed in my saw. I used it overhead in a sliding compound miter saw to cut paint grade poplar crown moldings. There was no chipping or tear outs. On walnut and cherry built-up crown assemblies I got similar results by judiciously lowering my cutting speed (blade advance speed). Even long tapered back slash joints required no sanding prior to assembly. Also I decided to put the blade in a table saw and produce some cabinet panels from hardwood veneer plywood. Of course I worked with finish side and face-down. Of several species tested, none produced splinters. I attribute those fine cuts to the high angle of the alternate tooth bevel. This seems to have the same effect as pre-scoring the cut line. I did not measure the angle with a protractor; but it does appear that the pitch of the tooth chisel edges versus the plane of the blade is steeper than that on many similar products. The blade did not gum up or scorch. Because of its fine results thus far, I do not think it sensible to dedicate this blade to high production rates; so I’ve not tested it under rapid use conditions. I will, however, continue to look at its longevity until sharpening – and until visible deterioration of the coating. So far, so good.
Mike Roberts (verified owner) –
very clean cuts.
Jaylan Marks (verified owner) –
Had to cut some 3 inch slabs of red oak. This saw did the job!
Roger Schuppe (verified owner) –
This blade is SHARP. I am using it on a DeWalt 20 Volt battery saw and it slices through material with almost no effort. I got it for use in thin material like plywood and it does a great job with minimal splintering. It tracks straight and has a very narrow kerf. I have always bought top quality blades for use on my portable saw since it has less power than a corded saw. This blade seems to be as good or better than the other blades I have been using. It has relief slots to keep it from warping when it gets hot and has a nonstick/low friction coating. I am just glad that more manufacturers are coming out with 6 ½” blades for battery saws. Since this blade did so well in plywood I tried it out on 2×6 Douglass fir and it went through it without a hitch. I normally use a worm drive saw for framing work and I am either going to get the 7 1/4” version for my big saw or use the 6 ½” blades on the worm drive. Since these blades have a diamond knockout I could easily install them on a full size saw and only lose about 3/8” of cutting depth.
Laverne Durgan (verified owner) –
The blade arrived in good condition and worked very well, it cut through the paneling like butter. I would recommend this blade to anyone looking to get a clean cut with a hand circular saw.Al S
Nayeli Monahan (verified owner) –
Works as expected. Very difficult to get out of thick plastic packaging. I ended up splitting the paper package apart and then releasing the blade.. The Milwaukee logo is printed on the wrong side of the blade so does not show when it is on the saw! (This would show correctly if the blade went on the left side of the saw. My saw has the blade on the right.)
Forrest Smith (verified owner) –
Just a nice fine finish blade for my cordless saw that is comparable to the Diablo blades I normally purchase.
Antoinette Moen (verified owner) –
Nice blade, but did not fit my Milwaukee, to small arbor.
Royce Glover (verified owner) –
Very clean cut with extremely low vibration and noise.
Kyler Breitenberg (verified owner) –
MIlwauki saw blades always give me good service and stand up well, even with poor quality wood products. I just use as directed and keep them sharp. I use the fine finish blades for MDF and Melamine to get a great cut for shelves and such, no sanding required. These blade are also coated with something like an anti-stick layer that keeps them from gumming up like uncharted blade sometimes do with laminates and rough plywood.
Alessandra Mosciski (verified owner) –
Was amazed how clean the cut was!