Milwaukee’s wood cutting, ultra-fine finish blades provide a smooth finish and cutting efficiencies to improve your productivity. A High-ATB tooth pattern provides a superior finish with minimal tearout in the cut material. An anti-friction coating keeps the blade cool while cutting and resists corrosion and gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. 10 in. blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use. A thin kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.
- Anti-friction coating
- Laser cut from sheet steel
- Polymer filled vibration slots
- High alternate-tooth bevel (ATB) pattern
- Cobalt infused tungsten carbide
- Thin kerf blade
- Optimized for both cordless and corded tools
- Blade tensioning ring
- 80-tooth; 5/8 in. arbor hole
- Great for use with: softwoods, hardwoods, malamine, MDF, veneered plywoods, paneling and moldings
Anais Lang (verified owner) –
I’m a trim carpenter for the past twenty years. One of the best blades for the money. I have tried a lot of them. Great product.
Chad Altenwerth (verified owner) –
Came faster than expected. Works great.
Amara Lemke (verified owner) –
Yes so much power for a battery operated saw! I’m very happy
Marguerite McGlynn (verified owner) –
Top quality product
Margarita Bayer (verified owner) –
I have used 40 tooth 6.5″ circular saw blade from several manufacturer’s. This one certainly ranks as good as any of the ones that I have purchased. It installed on my saw without difficulty. It tracked very well. Even without some blue tape, the initial cuts were very smooth. I don’t recall seeing these blades for sale at Home Depot. I hope that they start carrying them. I like Milwaukee accessories very much. I have too much invested in other brands of cordless tools to make the switch at this point. There are times that I wish that I would have started with Milwaukee.
Alyce Hilpert (verified owner) –
Just a nice fine finish blade for my cordless saw that is comparable to the Diablo blades I normally purchase.
Viola Daniel (verified owner) –
I have several saw blades with different tooth counts for cutting different types of material. My blade for cutting finished plywood and other thin woods was worn out. I’ve been having good luck with Milwaukee products lately and this saw blade is no exception. It cuts very easily and leaves as smooth a cut as you could expect. There is no binding to the wood and no extra load on the motor. It’s like cutting butter. If it lasts a while, which it appears it will, I’ll be very happy.
Destany McKenzie (verified owner) –
Had to cut some 3 inch slabs of red oak. This saw did the job!
Summer Okuneva (verified owner) –
Nice blade, but did not fit my Milwaukee, to small arbor.
Dayana Mraz (verified owner) –
Great saw blade, used it to cut panel. Smooth, no tear clean cut.
Julius Gaylord (verified owner) –
Used this thin kerf blade for putting up some shiplap siding. It was a stained shiplap to so I wanted to insure chipping was minimal. A thin blade and many toothed blade helped to insure the wood didn’t chip or splinter. After a wall; probably 60-80 cuts the blade is still as sharp as when it came out of its package. So I expect the blade to last a long time.
Bridie Schamberger (verified owner) –
Would definitely purchase again worked as expected!
Sherwood Treutel (verified owner) –
The fine teeth on this blade made cutting trim perfect, using my battery operated portable saw!
Geoffrey Ziemann (verified owner) –
Using in Milwaukee’s 10″ M18 Mitter saw. Good Blade, no splintering or chipping on Trim Boards after many cuts, Holding its edge real well
Delphia Ryan (verified owner) –
.Perfect for trim cutting
Adrian Cartwright (verified owner) –
this blade does a fine job on pine, but when used on 3/4 inch plywood it tends to splinter the downside. Have used it for a couple of weeks in my hobby woodworking shop, so its not like it gets used every day. Don’t know how long it will last.
Kenna DuBuque (verified owner) –
This saw blade cut thru “one by” pine like a hot knife thru butter.
Royce Schamberger (verified owner) –
It is what it says it is,
Xzavier Paucek (verified owner) –
This style of blade is excellent for all of the cutting I do. I cut a lot of plywood and various thicknesses and this blade goes thru it all like a hot knife thru butter. The blade does not get hot with normal use. The way the blade is made it dissipates the heat very quickly. The teeth self clean so it stays sharp and continues to give you that clean crisp cut. I have used this style of blade for several years now and I dont switch blades because this blade does what I need done and the blade lasts a long time if you take care of it. My grandpa use to sharpen saw blades before they had carbon tips and because I learned from him, I can use these blades a long time because I know how to sharpen them. This way they last a long time. These are a good quality blade and if you take care of them they last a long time and continue to cut sharp and crisp. These blades are a good investment.
Shaina Schmitt (verified owner) –
Good