Milwaukee 10 in. x 80-Tooth Ultra Fine Finish Circular Saw Blade
$49.97
In stock
Description
Milwaukee’s wood cutting, ultra-fine finish blades provide a smooth finish and cutting efficiencies to improve your productivity. A High-ATB tooth pattern provides a superior finish with minimal tearout in the cut material. An anti-friction coating keeps the blade cool while cutting and resists corrosion and gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. 10 in. blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use. A thin kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.
- Anti-friction coating
- Laser cut from sheet steel
- Polymer filled vibration slots
- High alternate-tooth bevel (ATB) pattern
- Cobalt infused tungsten carbide
- Thin kerf blade
- Optimized for both cordless and corded tools
- Blade tensioning ring
- 80-tooth; 5/8 in. arbor hole
- Great for use with: softwoods, hardwoods, malamine, MDF, veneered plywoods, paneling and moldings
Additional information
| Weight | 1.64 lbs |
|---|---|
| Dimensions | 0.31 × 11.81 × 13.78 in |
| Arbor Size | 5/8 |
| Color Family | Silver |
| Material Cut | Wood |
| Model | 48-40-1032 |
| Number in Package | 1 |
| Number of Teeth | 80 |
| Power Tool Accessory Type | Circular Saw Blade |
| Saw Blade Diameter (in) | 10 |
| Saw Blade Material | Carbide |
Reviews (76)
76 reviews for Milwaukee 10 in. x 80-Tooth Ultra Fine Finish Circular Saw Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Blades
Model# D1024X
Saw Blades
Model# D1280X
Saw Blades
Milwaukee 6 in. 24 Teeth per in. Thin Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5186
Saw Blades
Model# D1244X
Saw Blades
DEWALT Bi-Metal Reciprocating Saw Blade Set (15-Piece) with Tough Case
Model# DW4890
Saw Blades
Milwaukee 44-7/8 in. 18 TPI Bi-Metal Deep Cut Portable Band Saw Blade
Model# 48-39-0520
Saw Blades
Model# D1060X
Saw Blades
Milwaukee 12 in. 8/12 TPI. Multi-Material Cutting SAWZALL Reciprocating Saw Blades (5-Pack)
Model# 48-00-5094
Kendrick Rogahn (verified owner) –
The blade came on the date I was told it would arrive which is always nice. I mounted the blade on may Hitachi chop saw and it cut wood like it was warm butter. Smooth, clean cuts and fast. So I amtotally satisfied with the blade I ordered and will undoubtedly order more as well as other things down the line.
Letitia Braun (verified owner) –
This blade is SHARP. I am using it on a DeWalt 20 Volt battery saw and it slices through material with almost no effort. I got it for use in thin material like plywood and it does a great job with minimal splintering. It tracks straight and has a very narrow kerf. I have always bought top quality blades for use on my portable saw since it has less power than a corded saw. This blade seems to be as good or better than the other blades I have been using. It has relief slots to keep it from warping when it gets hot and has a nonstick/low friction coating. I am just glad that more manufacturers are coming out with 6 ½” blades for battery saws. Since this blade did so well in plywood I tried it out on 2×6 Douglass fir and it went through it without a hitch. I normally use a worm drive saw for framing work and I am either going to get the 7 1/4” version for my big saw or use the 6 ½” blades on the worm drive. Since these blades have a diamond knockout I could easily install them on a full size saw and only lose about 3/8” of cutting depth.
Ismael Bradtke (verified owner) –
I needed new blades for my small cordless circular saw and thought the Milwaukee blade would be worth a try. The description of a fine finish 36 tooth blade made me wonder about the “fine finish” performance that this blade would produce. I have to admit, I was pleasantly surprised. I immediately bolted it onto my saw and tried it on some scrap pieces of trim that I had. These pieces were already finished, so I thought that would be a good test for the “fineness”. On the ¾” quarter round, it did a nice job but there were some very small splinters chipped out. You really had to look to see them and they could have been covered with a little stain and would never be noticeable. Next I tried the blade on a piece of 5” baseboard that was also finished. The same for this piece, small pieces splintered out. I then did what I frequently do with this type of wood and taped the line where I was going to cut with painters tape. That took care of the splintering issue and the pieces looked great. The saw went through it smoothly and easily.I then thought I would try it on a 2” X 4”. It went through the board very easily and left a very nice cut. There was also a little soft wood splintering on the end. It didn’t matter on this piece, as it was going into framing for a wall. I was very happy with this cut also.I love these little cordless saws, as I frequently need to cut only a piece of two, and dislike dragging out a long extension cord for the bigger power saw and really don’t like getting out my miter saw on a stand if I don’t have to. A lot of my work is at remote locations anyway and there may be electrical service nearby, or there may not be. This little blade does the trick and I will definitely buy more of them.
Raul VonRueden (verified owner) –
This is the blade I will be using for all my fine cuts for now on!. This blade is carbide tipped and balanced well. It is easily installed and cuts smoothly while leaving a clean cut. The 60 teeth per inch are an impressive amount and they work well. This blade does cut like a hot knife through butter as I tried it on a variety of wood with excellent results.
Jesse Tromp (verified owner) –
No problem works well just what I needed
Lempi Mohr (verified owner) –
These new blades from Milwaukee are a great quality and an awesome price. The alternating top bevel teeth on this one aren’t quite as steep an angle as the larger 10″ and 12″ blades of the same series, but they still help provide a clean cut while avoiding tearout.The anti-friction coating works really well and I haven’t noticed it rubbing off on any of my workpieces either. This blade is significantly cheaper with similar performance to the other 36T blades I was using for my Milwaukee M12 FUEL circular saw – I’m glad to see them jumping into manufacturing high quality blades to go with their tools.
Clifford Streich (verified owner) –
Cuts clean. Hot knife through butter
Devyn Frami (verified owner) –
Performs as advertised. Thin kerf for less material waste; did not bind on hardwoods; fit the M12 cordless circular saw from Milwaukee.
Marjolaine Kulas (verified owner) –
The saw has definitely met my expectations.
Ines Stroman (verified owner) –
Great quality blade for my portable table saw. As with most Milwaukee blades they hold their edge better than most.
Nathen McLaughlin (verified owner) –
This blade was easy to install on my miter saw and cut like butter! The price was reasonable (better than some other blades), only time will tell if this lasts as long as a pricier blade. I’ve used it on pine and oak so far and would plan to use this for “finish” cuts if it continues to perform like this. I also think this would work great on my next flooring installation project (laminate or vinyl plank).
Jany Carter (verified owner) –
The blade is great. It fit perfectly on my m12 circular saw. It cuts great.
Angelica Leannon (verified owner) –
The blade arrived in good condition and worked very well, it cut through the paneling like butter. I would recommend this blade to anyone looking to get a clean cut with a hand circular saw.Al S
Preston Ferry (verified owner) –
I’m a trim carpenter for the past twenty years. One of the best blades for the money. I have tried a lot of them. Great product.
Rogers Osinski (verified owner) –
very clean cuts.
Robyn Corkery (verified owner) –
works like a hot knife thru butter. Very smooth cut without splintering.
Karianne Franecki (verified owner) –
Great blade – cuts easily and leaves smooth surfaces. Perfect for the new M18 table saw.
Kaya Ebert (verified owner) –
Top notch quality; working at my expectations.
Shanny Kassulke (verified owner) –
Very clean cuts
Niko Hahn (verified owner) –
I did not use this yet but it looks as though it is well designed with a narrow width for smother cutting. That’s all I have for now.