Milwaukee 10 in. x 80-Tooth Ultra Fine Finish Circular Saw Blade
$49.97
In stock
Description
Milwaukee’s wood cutting, ultra-fine finish blades provide a smooth finish and cutting efficiencies to improve your productivity. A High-ATB tooth pattern provides a superior finish with minimal tearout in the cut material. An anti-friction coating keeps the blade cool while cutting and resists corrosion and gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. 10 in. blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use. A thin kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.
- Anti-friction coating
- Laser cut from sheet steel
- Polymer filled vibration slots
- High alternate-tooth bevel (ATB) pattern
- Cobalt infused tungsten carbide
- Thin kerf blade
- Optimized for both cordless and corded tools
- Blade tensioning ring
- 80-tooth; 5/8 in. arbor hole
- Great for use with: softwoods, hardwoods, malamine, MDF, veneered plywoods, paneling and moldings
Additional information
| Weight | 1.64 lbs |
|---|---|
| Dimensions | 0.31 × 11.81 × 13.78 in |
| Arbor Size | 5/8 |
| Color Family | Silver |
| Material Cut | Wood |
| Model | 48-40-1032 |
| Number in Package | 1 |
| Number of Teeth | 80 |
| Power Tool Accessory Type | Circular Saw Blade |
| Saw Blade Diameter (in) | 10 |
| Saw Blade Material | Carbide |
Reviews (76)
76 reviews for Milwaukee 10 in. x 80-Tooth Ultra Fine Finish Circular Saw Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Blades
Model# D1244X
Saw Blades
Milwaukee 12 in. 18 Teeth per in. Medium Metal Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5189
Saw Blades
Model# D1040X
Saw Blades
Milwaukee 8 in. 8/12 Teeth per in. Mutli-Material Cutting SAWZALL Reciprocating Saw Blades (5 Pack)
Model# 48-00-5093
Saw Blades
Model# D1060X
Saw Blades
DIABLO 7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
Model# D0724R
Saw Blades
DEWALT 8 in. 18 Teeth per in. Demolition Reciprocating Saw Blade (5-Pack)
Model# DW4821
Saw Blades
Milwaukee 12 in. 8/12 TPI. Multi-Material Cutting SAWZALL Reciprocating Saw Blades (5-Pack)
Model# 48-00-5094
Hilbert Bogisich (verified owner) –
This blade is almost a “must-have” when cutting any large piece of pre-finished trim such as crown molding. The extra number of teeth assure a chip-free but especially if you use blue painters tape on the cut line. For smaller applications it is better to use a smaller blade. Smaller blades produce less wobble than larger blades. This blade is well worth the money.
Emmett Will (verified owner) –
Makes very smooth cuts. Don’t know how long it will remain sharp.
Gaylord Weimann (verified owner) –
Impressed very well pleased thanks for asking
Cleveland Kuhlman (verified owner) –
I used it in the M12 battery powered circular saw and it made a good, clean cut.
Alisha Ullrich (verified owner) –
So far saw has been great, looking forward to the next project to give it another test.
Marietta Leffler (verified owner) –
Excellent saw blade, cuts like it’s going through butter.
Aubrey Spinka (verified owner) –
A nice fine finish blade that performs very well without gumming up thanks to the anti- friction coating. This 10 inch 80 tooth saw blade is well designed and high quality. I typically use the DIABLO Red saw blades from Freud America, Inc. for my ultra fine finish saw blade needs and also have used several construction series blades from Dewalt. This blade is a competitor for the Diablo 80 tooth blade but the Diablo does cut a little cleaner in my opinion. It has the same price point and cut the several project panel veneered plywood sheets with ease and cut a 2 1/2″ butcher block top without bogging or any tear out. A little sanding with a finish sander and the table top was ready to go. As for the longevity of this blade I can only say that it is still as sharp as it was when installed on my saw and only time will tell but I do not see it getting dull any time soon.
Joany Dickinson (verified owner) –
Full disclosure, I’m not an expert however I’m a big fan of Milwaukee stuff. It basically just couldn’t cut 3/4 thick red oak boards (M12 system saw). No worries Mil, I’ll try again.
Lucas Bartoletti (verified owner) –
Very clean cut with extremely low vibration and noise.
Christ Von (verified owner) –
Cut through 3/4″ prefinished maple leaving a clean edge.
Lyric Gibson (verified owner) –
Using this on my Milwaukee battery powered mitre saw. Just trimmed an entire basement with it and it is still nice and sharp. So far so good.
Mazie Ullrich (verified owner) –
Was amazed how clean the cut was!
Elva Bernier (verified owner) –
Cuts like butter. As clean a cut as I could hope for. Amazing quality!
Blake Huel (verified owner) –
This Milwaukee blade is really a good blade to use on my table saw. It cuts thru just about any kind of wood that I throw at it. It stays sharp and when it gets dull, It is so easy to sharpen and use again. The off set is perfect and it dissipates the heat from cutting evenly thru the blade so it can cut longer and still does a good job. This is a good blade and the cost is about right for this size of blade. I really like this style of blade. It does a good job.
Zula Bradtke (verified owner) –
I have been using this blade in a rigid contractors saw for a few weeks. I have used it on a variety of thicknesses with very equal outcome. The blade does a good job on plywood and MDF materials. I have also used it on pine lumber of differing thickness. I have no complaints and the blade cuts like the wood is soft as butter. This must be from the laser cut to help cut wobble and vibration. Milwaukee came out with a good blade.
Devon Stokes (verified owner) –
No. I needed a 3in blade.