Milwaukee’s wood cutting, fine finish blades provide cleaner cuts and cutting efficiencies to improve your productivity. An ATB tooth pattern minimizes tearout in the cut material. An anti-friction coating keeps the blade cool while cutting and resists corrosion and gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. 10-1/4 in. blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use. A thin kerf design delivers faster, more efficient cuts.
- Anti-friction coating
- Laser cut from sheet steel
- Polymer filled vibration slots
- Alternate-tooth bevel (ATB) pattern
- Cobalt infused tungsten carbide
- Thin kerf blade
- Blade tensioning ring
- 40-tooth; 5/8 in. arbor hole with diamond knock-out
- Great for use with: softwoods, hardwoods, malamine, MDF, veneered plywoods, wet lumber, treated lumber and laminated woods such as plywood, OSB, LVL, PSL, LSL and OSL
Fern Padberg (verified owner) –
Very clean cuts
Helen Hamill (verified owner) –
Was amazed how clean the cut was!
Judy Treutel (verified owner) –
Great quality works good.
Carolyn Ebert (verified owner) –
This is the blade I will be using for all my fine cuts for now on!. This blade is carbide tipped and balanced well. It is easily installed and cuts smoothly while leaving a clean cut. The 60 teeth per inch are an impressive amount and they work well. This blade does cut like a hot knife through butter as I tried it on a variety of wood with excellent results.
Carol Goldner (verified owner) –
Yes so much power for a battery operated saw! I’m very happy
Ellis Brekke (verified owner) –
The fine teeth on this blade made cutting trim perfect, using my battery operated portable saw!
Ernestine Schroeder (verified owner) –
No problem works well just what I needed
Deshawn Kirlin (verified owner) –
The blade came on the date I was told it would arrive which is always nice. I mounted the blade on may Hitachi chop saw and it cut wood like it was warm butter. Smooth, clean cuts and fast. So I amtotally satisfied with the blade I ordered and will undoubtedly order more as well as other things down the line.
Pascale Bednar (verified owner) –
I used it in the M12 battery powered circular saw and it made a good, clean cut.
Orland Legros (verified owner) –
Great blade – cuts easily and leaves smooth surfaces. Perfect for the new M18 table saw.
Colton Leuschke (verified owner) –
This blade is almost a “must-have” when cutting any large piece of pre-finished trim such as crown molding. The extra number of teeth assure a chip-free but especially if you use blue painters tape on the cut line. For smaller applications it is better to use a smaller blade. Smaller blades produce less wobble than larger blades. This blade is well worth the money.
Kaia Barton (verified owner) –
Came faster than expected. Works great.
Meta Ferry (verified owner) –
Would definitely purchase again worked as expected!
Caden Prosacco (verified owner) –
It is what it says it is,
Noemy Murray (verified owner) –
Using this on my Milwaukee battery powered mitre saw. Just trimmed an entire basement with it and it is still nice and sharp. So far so good.
Bernadette Kozey (verified owner) –
This saw blade cut thru “one by” pine like a hot knife thru butter.
Bryon Volkman (verified owner) –
I needed new blades for my small cordless circular saw and thought the Milwaukee blade would be worth a try. The description of a fine finish 36 tooth blade made me wonder about the “fine finish” performance that this blade would produce. I have to admit, I was pleasantly surprised. I immediately bolted it onto my saw and tried it on some scrap pieces of trim that I had. These pieces were already finished, so I thought that would be a good test for the “fineness”. On the ¾” quarter round, it did a nice job but there were some very small splinters chipped out. You really had to look to see them and they could have been covered with a little stain and would never be noticeable. Next I tried the blade on a piece of 5” baseboard that was also finished. The same for this piece, small pieces splintered out. I then did what I frequently do with this type of wood and taped the line where I was going to cut with painters tape. That took care of the splintering issue and the pieces looked great. The saw went through it smoothly and easily.I then thought I would try it on a 2” X 4”. It went through the board very easily and left a very nice cut. There was also a little soft wood splintering on the end. It didn’t matter on this piece, as it was going into framing for a wall. I was very happy with this cut also.I love these little cordless saws, as I frequently need to cut only a piece of two, and dislike dragging out a long extension cord for the bigger power saw and really don’t like getting out my miter saw on a stand if I don’t have to. A lot of my work is at remote locations anyway and there may be electrical service nearby, or there may not be. This little blade does the trick and I will definitely buy more of them.
Judah Jerde (verified owner) –
I’m a trim carpenter for the past twenty years. One of the best blades for the money. I have tried a lot of them. Great product.
Roel Lubowitz (verified owner) –
.Perfect for trim cutting
Audra Bogisich (verified owner) –
Works as expected. Very difficult to get out of thick plastic packaging. I ended up splitting the paper package apart and then releasing the blade.. The Milwaukee logo is printed on the wrong side of the blade so does not show when it is on the saw! (This would show correctly if the blade went on the left side of the saw. My saw has the blade on the right.)