Milwaukee 8 in. x 58 Carbide Teeth Aluminum Cutting Circular Saw Blade

60 reviews for Milwaukee 8 in. x 58 Carbide Teeth Aluminum Cutting Circular Saw Blade

1. Rated 5 out of 5

   Luther Spencer (verified owner) – October 7, 2022

   Robust 80 Tooth, 12-inch metal and plastic cutting blade with a 5000 RPM limit (that’s high enough to use with a conventional wood working chop saw or miter saw). I used it in my 12-inch sliding compound miter saw to cut some 1/8″ aluminum bar stock and it did great. Very smooth cuts.1-inch arbor fit my saw perfectly. The package says it is recommended for thin metal (up to 3/32″) and medium metal (1/8″ to 1/4″) but NOT for thick metal (over 1/4″).It is NOT recommended for stainless steel, but the package says nothing about plain steel. Since it spins so fast, my feeling is it should not be used for plain steel either. Wish they would list that specifically on the package to avoid any confusion.It is recommended for Aluminum, Copper, Brass, Plastic and Fiberglass.Max RPM is 5000Arbor is 1″ (25.4 mm)

2. Rated 5 out of 5

   Scarlett Russel (verified owner) – October 3, 2022

   I can use this 9″ blade on my table saw with no problems. It cuts thru the aluminum all day and never seems to get dull. It doesn’t get clogged up with the shavings and runs cool and clean. I like how it cuts a clean edge with little or no effort. On the job site I dont have to keep changing the blade to cut the different metals that we are using. The blade doesn’t burn up like some cheap blades and it lasts all day. This is a great blade and has multiple uses on the site, Good choice.

3. Rated 5 out of 5

   Louvenia Altenwerth (verified owner) – September 10, 2022

   Great blade for thin metal, aluminum, copper, brass, and plastics. Okay for medium metal (1/8″ – 1/4″). My use will be primarily for plastics and it cut smoothly with no apparent heating, leading to a smooth edge. Fits my non-Milwaukee saw just fine and has absolutely no wobble or vibration, I guess the laser cut vibration slots assure that. The rear of the package has great information as to appropriate uses and features of the blade. Don’t let the light weight throw you off, the teeth are cobalt infused tungsten carbide which produces a superior cut and longer life.

4. Rated 5 out of 5

   Bailey Dickens (verified owner) – September 10, 2022

   Great blade cuts right through steel I use it to cut the bolts cuts with no problem

5. Rated 5 out of 5

   Bernita Feest (verified owner) – August 7, 2022

   I needed to cut some aluminum shower door hardware as part of a bathroom upgrade. Due to the size of the pieces and type of cuts to be made, I used this blade in my 10-inch table saw. This blade is for a saw with a one-inch arbor – but since my saw has a 5/8-inch arbor I had to use a brass adaptor.This blade seems to be top quality. The carbide-tipped teeth have an alternate top bevel grind, and there are numerous laser cut vibration dampening slots to minimize heat buildup and noise. It is designed to cut without any water or oil lubrication, which eliminates the hassle and mess.This blade worked flawlessly on the parts I cut and produced a fairly smooth finish. I am very satisfied with the quality and performance of this blade.

6. Rated 5 out of 5

   Leopold Borer (verified owner) – July 20, 2022

   Milwaukee 48-40-4370 14” 80 Tooth Carbide Circular Saw Blade – This Circular Saw Blade has Cobalt infused Tungsten Carbide, the blade is designed to be operated at 1800 RPM and installed on the Corded Metal Cutting Miter Saw…This blade is rated to cut medium thickness 1/16” to ¼” Aluminum, Brass, Copper, Fiberglass and Plastic, it will also cut thin up 3/32” Steel and medium 1/8” to ¼” steel…The blade has been designed to cut dry (no lubricant required) as well as cut cooler…I installed this blade on Milwaukee # 6190-20 Dry Cut Machine, this blade runs and cuts with less vibration due to (4) groups of equally spaced laser cut slots…I cut ¾” Grade “L” Copper Pipe, ¾” EMT, Aluminum Rain Gutter, 4” PVC Conduit and 7/8” Galvanized Super Channel…The blade performed as indicated, intended and expected without any problems…According to Milwaukee this blade is not rated to cut any metal thicker than ¼”…Milwaukee does manufacture (2) blades to cut metal up to ½”, a 72 tooth blade # 48-40-4505 and a 90 tooth blade # 48-40-4510, both blades are designed to be operated dry on a corded metal cutting miter saw…These blades produce burr free cuts on threaded rod or bolts…

7. Rated 5 out of 5

   Zella Murazik (verified owner) – July 17, 2022

   Perfect for my project

8. Rated 5 out of 5

   Antonette McLaughlin (verified owner) – July 15, 2022

   Cuts like hot knife through butter! No burrs No jagged metal works like a charm in metal cutting saw!

9. Rated 5 out of 5

   Leonora Wilderman (verified owner) – July 4, 2022

   I own a lot of Milwaukee tools, and like the others, this one does not disappoint! I received this to cut through some aluminum for an outdoor project. I assumed it would work based on the Milwaukee name, but this was GREAT! It cuts through aluminum like butter! The blade did not “junk” up or anything with the cutting despite quite a bit of use on this project. The edges were very smooth following the cut. Save yourself the trouble and order this blade for your aluminum, cooper, and plastic projects. It is well worth it! Oh, as a bonus- the packaging of this blade is far better than others I have received!

10. Rated 5 out of 5

    Sammie Eichmann (verified owner) – June 25, 2022

    Milwaukee 14 in. x 80 Carbide Teeth Metal Cutting Circular Saw Blade – Like most guys I cut aluminum on either a framing chop saw or a finishing compound mitersaw. Stuff like aluminum closet door track, angle iron for brackets, or aluminum railing. I finally pulled the trigger and ordered a blade dedicated to cutting aluminum, brass, copper and plastics to keep my finishing saw blade sharper and last longer.I mounted the new blade in an old metal cutting chop saw and it works great. It cuts aluminum and copper very cleanly with minimal deburring required. I’ve also cut white PVC trim-lumber and PVC electrical conduit with very good results.The packaging says it can cut thin steel (up to ¼”) but, I haven’t tried it yet.

11. Rated 4 out of 5

    Fernando Ryan (verified owner) – June 19, 2022

    I tried this blade on an aluminum gutter downspout and on a piece of one inch thick plastic. It worked well on both applications. I had to use a hub spacer to compensate for the hole diameter of the blade. It was 1/8 inch larger than the hub on the saw I was using. Both cuts were quick and easy with good results. I did have burrs on the aluminum downspout but I used a soft wire wheel to clean up the cut. This blade definitely speeds up the cutting process when doing things like gutter installs or repairs. The plastic cut clean and smooth with minimal burr issues.

12. Rated 5 out of 5

    Cruz Kutch (verified owner) – June 18, 2022

    So far so good. I’m not used to using a carbide tooth blade to cut metals. Usually I use the old style abrasive blades or wheels. But I’m definitely liking the carbide tooth blade mush better. Milwaukee made some pretty good blades here. I used the blade to cut some copper pipe, aluminum sheeting and some fiberglass panels and all worked out great. For the copper it was really fast and the metal stayed cool. It didn’t heat up or spark like crazy. The aluminum sheeting cuts were perfect also. Actually surprised how there wasn’t many burrs if any at all when I had a good straight line going. I also cut some thin metals on some blinds to cut the track to size and it sure beat using a hacksaw. I really like how clean this blade cuts with no burrs or burn marks. Definitely wear eye protection because little flakes of metal can jump around depending on the saw. I used it on my Milwaukee 6 1/2 saw and the rpms suited it well. All the carbide teeth are still there after me using it and still sharp. Definitely looking forward to using this style blade now to cut metal. Hopefully Milwaukee makes some 1/8” thickness metal cutting blades in the future for some softer steel. Definitely good quality carbide material used in this blade.

13. Rated 5 out of 5

    Joesph Zieme (verified owner) – June 11, 2022

    The Milwaukee ten inch eighty tooth aluminum cutting saw blade is specifically designed to cut nonferrous metals, cuts are high quality and speed right through the most demanding metal cutting applications ;no lubrication is needed as this blade is designed for cool running. The metal cutting circular saw blades have hardened alloy steel bodies, thus extending blade life and delivering high quality cuts. The teeth are carbide tipped and have alternating bevel grind to shear through metal delivering burr free, cool to touch cuts.This uses tungsten carbide to extend cutting life and has laser cut vibration dampening slots to minimize heat, sound and noise. Clean, cool and burr free cuts are the claim to fame of this blade.

14. Rated 5 out of 5

    Myrna Pagac (verified owner) – June 5, 2022

    I have cut some stuff that is way beyond what it supposed to be used for.

15. Rated 5 out of 5

    Lue Bechtelar (verified owner) – May 28, 2022

    Cuts very clean on metal roof panels and trim. I love the blade and the saw. This system saves so much time!

16. Rated 5 out of 5

    Mia VonRueden (verified owner) – April 21, 2022

    Cuts like butter smooth

17. Rated 5 out of 5

    Madelyn Ward (verified owner) – April 17, 2022

    The Milwaukee 7” 54 tooth saw blade is sweet! I wasn’t sure what I had until I tried it, and wow! This blade will cut brass, copper, plastics, fiberglass, and aluminum! It cuts clean (like butter), cuts cool, and dry with hardly any vibration! Load it into a 7” circular saw and you’re good to go. The teeth are cobalt infused tungsten carbide. It definitely needs to be a part of your saw blade arsenal.

18. Rated 5 out of 5

    Maxine Powlowski (verified owner) – April 5, 2022

    I have been using this blades for the last 10 years and they work excellent.

19. Rated 5 out of 5

    Darrick Bernhard (verified owner) – March 18, 2022

    This Milwaukee blade is designed to be used in their metal saw and in eight inches in diameter and has 58 teeth (note the product description implies 60 teeth which is not correct). The arbor is 5/8 inch. This blade is specifically designed for aluminum, brass, copper, plastic and fiberglass. Milwaukee claims it is clean cutting and for the most part I found that true. For some of the metal I cut through there were some burs left at the end of the cut but that could have been the result of how I had the metal supported as I cut through. I felt no vibration as I performed multiple cuts. Even thought the Milwaukee metal saw has a chip catching mechanism, I did find the saw blade threw some chips a good 3 feet from the work area. Although I have not yet had an opportunity to cut plastic with the blade I am looking forward to doing so. Usually plastic items require my reciprocating saw which is a long tedious process. This blade in the metal saw should make quick work of cutting plastic.

20. Rated 4 out of 5

    Jovanny Mitchell (verified owner) – March 13, 2022

    Milwaukee 8 in. x 60 Carbide Teeth Metal Cutting Circular Saw Blade is designed to cut non-ferrous metals (aluminum, brass, copper, etc.), plastic, fiberglass and thin metal up to 3/32-inch. It has cobalt infused tungsten carbide tipped teeth that runs cooler. It is substantially for softer materials without high iron (ferrite) content. Other more common blades are for ferrous metals. This blade has more teeth than the ferrous metal cutting blades and gives a cleaner cut in softer materials. With ferrous blades, feeding the material too fast can jam it and damage a tooth or send plenty of metal shavings flying. With plastic and fiberglass material this isn’t the same problem, the more teeth will result in a cleaner cut. It states on the package it is clog free, and has thin slots you can see in the photo’s to dampen vibration. I tried this blade out and had no problem, still very new. Milwaukee makes good saw blades so this should last when used with care and avoid the harder materials.