The Milwaukee 4 in. Crimped Wire Wheel Brush takes care of general purpose surface cleaning and conditioning. Made of carbon steel, this brush is designed for use on grinders with 5/8 in. – 11 in. threaded spindles. Not capable of etching.
- Carbon steel construction
- Use with grinders with 5/8 in. – 11 in. threaded spindles
- 0.014-Gauge brush wire
- Includes: one 4 in. radial crimped wheel- carbon steel
- note: product may vary by store
Yasmin Cormier (verified owner) –
Durable long lasting grider Brush , will need googles for safety operation, good item.
Candida Heathcote (verified owner) –
Two steel columns were rusted at the bottom I used the circular wire brush to remove the rust it worked perfectly.
Oleta Pouros (verified owner) –
Using it to prep wrought iron hand rails for new paint. Worked as good as can be expected.
Ryley Davis (verified owner) –
I purchased the wire wheel based on the product name Milwaukee, I was not disapointed. The wheel had less wire loss than other wheels and completed the job faster with less wear. I would purchase the same product for future commercial work.
Dimitri Homenick (verified owner) –
Worked great for preparing my wifes truck bed for a spray in liner!
Carolanne Waelchi (verified owner) –
We needed a wire brush that was soft enough to not destroy some copper bars we needed to clean. The twisted wire is to harsh for our job. This crimped stranded wire is perfect.
Stan Hagenes (verified owner) –
Used to strip paint of a vehilce. Works well while bristles last but wears down too quickly..
Annamarie Barrows (verified owner) –
This tool works very well in my professional wood shop.
Jennie Lueilwitz (verified owner) –
Does what you expect a wire wheel to do, but sheds wires a little faster than I expected from a while wheel in this price range.
Elyssa Windler (verified owner) –
I have used this wire wheel several times and many different jobs. has long indurance and soft enough to not damage the brass material i was working on.
Yolanda Feest (verified owner) –
it worked fine for peeling old paint off masonry. probably not what it was intended for…
Elyse Aufderhar (verified owner) –
It did a good of stripping rust,paint, and body filler. Using a angle grinder.
Terrill Schaefer (verified owner) –
The wire wheel does a great job in removing rust. However do not get your eyes in line with the wire wheel. The wire bristles come out of the wheel.
Adelia Watsica (verified owner) –
Tuff and doesn’t break easy!
Virginie Pacocha (verified owner) –
Works as described funny thing is it’s rated for 12000 RPM Max and the Milwaukee hundred and ten volt grinder is rated at 12000 RPM minimum. So they work against each other, in other words don’t expect any wire cup wheel the last too long.
Burley Hudson (verified owner) –
Works like a charm. Took off paint, dried caulking, everything down to the metal.
Myrtice Bechtelar (verified owner) –
Very good, long life. Highly recommended.
Jennyfer Harvey (verified owner) –
It wears well…was used to clean rusty off 50yr old TYLER TX iron plumbing pipe.
Tomas McKenzie (verified owner) –
Very good strong reliable