Milwaukee 6 in. SDS-Max SLEDGE Steel Floor Scraper Bit
$156.45
Milwaukee Carbide SDS-Max Floor Scraper Bit is the perfect tool for hard to remove thinset. Offers long lasting durability and stability.
In stock
Description
The Milwaukee SDS-MAX SLEDGE Floor Scraper stays sharper longer. Optimized design delivers up to 2x faster material removal. The SLEDGE Floor Scraper is ideal for tile, linoleum, laminate and adhesive removal. This floor scraping chisel has a 6 in. wide blade for increased productivity. The sharpened, flexible blade cuts under material faster with a beveled plate edge to prevent material binding. The countersunk bolts reduce loosening and high grade forged steel provides maximum durability. For use with SDS-Max rotary hammers.
- 6 in. wide blade for increased productivity
- Sharpened, flexible blade cuts under material faster
- Beveled plate edge prevents material binding
- Countersunk bolts to reduce loosening
- For use with SDS-MAX rotary hammers
- High grade forged steel for maximum durability
- German made
Additional information
| Weight | 6.3 lbs |
|---|---|
| Dimensions | 6.00 × 1.20 × 24.80 in |
| Assembled Depth (in.) | 1.5 in |
| Assembled Height (in.) | 25 in |
| Assembled Width (in.) | 6 in |
| Bit Diameter | 6 in |
| Bit Length (in.) | 25 |
| Bit Material | Steel |
| Drill Bit Type | Flat Chisel |
| Drill Bit Type(s) Included | Masonry Bit, Percussion Bit |
| Individual/Set | Individual |
| Material Application | Linoleum, Vinyl Flooring |
| Model | 48-62-4096 |
| Self-Feeding | No |
| Shank Diameter | 45/64 in |
| Shank Style | SDS Max |
| Tools Product Type | Power Tool |
Reviews (32)
32 reviews for Milwaukee 6 in. SDS-Max SLEDGE Steel Floor Scraper Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2735P
Drill Bits
Model# 48-20-8856
Drill Bits
Model# 48-20-8852
Drill Bits
Model# 48-25-2122
Drill Bits
Model# DW2043 Z
Drill Bits
Model# DW2542
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Drill Bits
Model# 48-25-2252
Casimir Roob (verified owner) –
Nice. Shaft is integrated into blade holder. Cheaper models use a two-piece design, which is weak and will snap off at the point where the shaft enters the holder. This produc’s one-piece design does it right!
Amari Tromp (verified owner) –
this is an awesome product for taking out either flooring, glue, thinset and old tile.
Jack Deckow (verified owner) –
THIS TOOL HAS MADE OUR JOB’S SO MUCH MORE EFFICIENT AND HAS CUT THE TIME DOWN BY HOURS LESS THEN THE OLD FASHIONED WAY BY HAND.
Arthur Kassulke (verified owner) –
I’m using the Milwaukee SDS-Max tile chisel in a Milwaukee Rotary Hammer (model # 2718-22HD). Of course, the chisel will fit any SDS-Max mount tool, not just Milwaukee tools.I’m a homeowner/DIY’er, not a pro skilled trades-person but I do a fair amount of helping out friends and neighbors – so any ‘labor saving’ device is welcomed in my shop.The tile chisel isn’t just for removing floor tiles (at least in my book; YMMV). If you’ve ever had the “pleasure” of taking up old indoor/outdoor carpeting that had been permanently glued to a concrete porch you’d appreciate having a rotary hammer with one of these chisels mounted.This chisel makes the job ever-so-much easier than using a hand chisel and mallet. The angled end does a nice job of cleaning up the adhesive. You may want to practice in an unseen area in order to limit the surface damage done when removing the carpet/adhesive. The rotary hammer is a bit of a beast, but a lot less work than a manual sledge.You’ll want to use hearing and eye protection and put a light coating of grease on the chisel end that goes into the hammer. The grease makes it easier to extract the chisel at the end of the day.I’ve not come up with any other ‘outside the box’ uses for this chisel (yet) but it certainly works as advertised. If you have an SDS-Max hammer this angled chisel makes a nice addition to your accessories box.Fit and finish is excellent. Not a tool I’ll use every day (or month!) as a DIY’er, but it’s really nice to have on hand when the need crops up.HTHRegards,Jim
Deshaun Wyman (verified owner) –
The carbide floor scraper saved me a lot of time getting the thin set off and the blade still looked like new with no ware.
Koby Schneider (verified owner) –
This 2 in. x 15 in. Milwaukee SDS MAX Chisel Bit is a brute. When removing some old floor tile in a bathroom you always have that section that doesn’t want to come up. With the weight of the hammer drill and a little pressure I had to be careful as this bit, before you knew it, would eat right down thru the tile and thin set into the existing concrete floor if you didn’t have the proper angle. High grade forged steel is what gives these bits there longevity and ability to hold an edge and makes them worth the money. It’s not worth the risk to use no name aftermarket inferior bits, you pay more in the long run. Don’t forget your safety glasses, mask, knee pads and gloves.
Coralie Bartell (verified owner) –
Heavy duty, works great
Jada Kiehn (verified owner) –
Very strong and effective, I used it on glue, vinyl and thin set
Tate Kulas (verified owner) –
Typical Milwaukee quality and superb design. This baby is forged not welded for superior strength. The end is angled just about right for the average height person to prevent fatigue on larger jobs. It feels like it is heat treated tough but not brittle. I say feels because, as a Toolmaker I can tell by the way it files, like it is semi-hard and tough. Remove that old tile quickly and easily my friend.
Kavon Dibbert (verified owner) –
it works. you should carry replacement blades.
Alvina White (verified owner) –
Worked better than expected Blade cracked after removing about 1500 sq ft of 16×16 tile
Robin Lindgren (verified owner) –
Excellent. Milwaukee Tool has a great product..
Rudy O’Connell (verified owner) –
Easy to use, it’s excellent for tile removal.
Golda Langosh (verified owner) –
SHE’S A VERY GOOD CHISEL
Griffin Stark (verified owner) –
Good blade
Austin Champlin (verified owner) –
I start use it since this blade came out in the market, I pull out 200 sq. ft of hardwood floor glue in 8 hours its great, I always keep one extra for emergency
Gerson Balistreri (verified owner) –
Used this to remove tile and thinset in a large bathroom. Worked without any problems. I made sure the bolts were tight, which they were, and started removing 18-year-old, 16″ tiles. After I was done I cleaned the tool up and re-checked the bolts, which were still tight, and it still looked new. My tile guy has been using this tool for many years and has never had a problem.
Jude Satterfield (verified owner) –
Did the job exactly how I needed it too!
Kelsi Gottlieb (verified owner) –
Killed the earful tile in my house
Antonette Cartwright (verified owner) –
The bolts and nuts continuously worked them selves loose while using this blade. It got so bad that I had to go purchase new bolts, washers, lock washers, and lock bolts. They still came loose but not as bad. I feel that if they were a harder grade not and bolt and bigger that this wouldn’t be issue