Milwaukee 6 in. SDS-Max SLEDGE Steel Floor Scraper Bit
$156.45
Milwaukee Carbide SDS-Max Floor Scraper Bit is the perfect tool for hard to remove thinset. Offers long lasting durability and stability.
In stock
Description
The Milwaukee SDS-MAX SLEDGE Floor Scraper stays sharper longer. Optimized design delivers up to 2x faster material removal. The SLEDGE Floor Scraper is ideal for tile, linoleum, laminate and adhesive removal. This floor scraping chisel has a 6 in. wide blade for increased productivity. The sharpened, flexible blade cuts under material faster with a beveled plate edge to prevent material binding. The countersunk bolts reduce loosening and high grade forged steel provides maximum durability. For use with SDS-Max rotary hammers.
- 6 in. wide blade for increased productivity
- Sharpened, flexible blade cuts under material faster
- Beveled plate edge prevents material binding
- Countersunk bolts to reduce loosening
- For use with SDS-MAX rotary hammers
- High grade forged steel for maximum durability
- German made
Additional information
| Weight | 6.3 lbs |
|---|---|
| Dimensions | 6.00 × 1.20 × 24.80 in |
| Assembled Depth (in.) | 1.5 in |
| Assembled Height (in.) | 25 in |
| Assembled Width (in.) | 6 in |
| Bit Diameter | 6 in |
| Bit Length (in.) | 25 |
| Bit Material | Steel |
| Drill Bit Type | Flat Chisel |
| Drill Bit Type(s) Included | Masonry Bit, Percussion Bit |
| Individual/Set | Individual |
| Material Application | Linoleum, Vinyl Flooring |
| Model | 48-62-4096 |
| Self-Feeding | No |
| Shank Diameter | 45/64 in |
| Shank Style | SDS Max |
| Tools Product Type | Power Tool |
Reviews (32)
32 reviews for Milwaukee 6 in. SDS-Max SLEDGE Steel Floor Scraper Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# DW2735P
Drill Bits
Model# 48-28-1010
Drill Bits
Model# FB-015
Drill Bits
Model# 49-56-7010
Drill Bits
Model# 48-25-2122
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Gerda West (verified owner) –
I was a little put off by the price, however after using it to remove about 800 sq.ft. of thinset, it was worth every penny. The bolts did loosen up at first, but after cranking them down good it never happened again. Definitely exceeded my expectations.
Ernesto Greenfelder (verified owner) –
Great!So much easier than doing it with a hand scraper . Had a lot of ceramic tile to remove,bought this after hands were all blisters from doing it with a hand scraper. Tile just popped out with ease
Jackeline Hudson (verified owner) –
Made light work of a tough job! Saved me countless man hours. Was well worth the money spent.
Karolann Okuneva (verified owner) –
Broke easily
Junius Kris (verified owner) –
Very well made as are all of Milwaukee’s tools. SDS tools are easy mounting and easy to remove, no keys necessary. Shank is precision ground to fit SDS MAX tools. The tool is 25″ long over all with a cast shank a full 1″ diameter. The carbide blade is 6″ wide x 7″ long and 3/32″ thick and is held in place with 4, 3/8″ diameter bolts with lock nuts.. The bit itself weighs 6 1/2 lbs. Carbide is very hard and can chip or break easily if used improperly or bumped against anything hard. I intend to make a rubber or heavy plastic sheath to cover the entire blade to prevent damage. You need a diamond wheel to sharpen. Photos would show little so I have none with this review.
Eva Christiansen (verified owner) –
It is a solid piece of steel, shaped in the predetermined maximum efficient standard to chisel away tile flooring. Used in a Makita SDS-Max, makes short work of upending them. Will always use Milwaukee bits, if they dull, use a grinder to sharpen again.
Saige Hilpert (verified owner) –
I purchased this to remove slate tile from concrete. Seemed like it might have been the wrong tool for slate – as the slate flaked and disintegrated rather than coming up in big pieces. Using a smooth 3 inch seemed to work better for our particular application. Good quality chisel though.
Jamel Zemlak (verified owner) –
Awesome for tile removal. Was able to remove 300 soft in a few hours.
Ashly Reichert (verified owner) –
I was able to easily lift the existing tiles with this.
Alessia O’Hara (verified owner) –
works great for VCT
Jenifer Beatty (verified owner) –
Awesome for tile removal. Was able to remove 300 soft in a few hours.
Felicity Witting (verified owner) –
Used to remove vct also took up tile.as well and still going strong