Milwaukee 9/16 in. Titanium Silver and Deming Drill Bit
$22.54
Milwaukee Titanium Silver and Deming Drill Bit decrease heat build-up, deliver a precision start and prevent walking for fast, accurate holes.
In stock
Description
Milwaukee Titanium S and D bit is engineered with 135° split point delivers a precision start and prevents walking for fast, accurate holes. The additional of the Secure Grip 3-flat shank prevents slipping in corded and cordless applications. Titanium coating is ideal for metal applications to give you up to extended life over black oxide but can be used in all applications.
- 135° split point for precision start no walking
- Secure grip
- Titanium coating for extended life
- Cobalt steel 10x life versus black oxide
- 3-flat Shank (1/2 in.)
- 6 in. length
- Limited Lifetime Warranty
Additional information
| Weight | .25 lbs |
|---|---|
| Dimensions | 8.63 × 0.75 × 2.75 in |
| Assembled Depth (in.) | 0.5625 in |
| Assembled Height (in.) | 0.5625 in |
| Assembled Width (in.) | 6.00 in |
| Bit Diameter | 9/16 in |
| Bit Length (in.) | 6 |
| Bit Material | Titanium |
| Drill Bit Type | Twist |
| Drill Bit Type(s) Included | Twist |
| Individual/Set | Individual |
| Material Application | Aluminum, Cast Iron, Duct/Sheet Metal, Stainless Steel, Steel |
| Model | 48-89-4634 |
| Self-Feeding | No |
| Shank Diameter | 1/2 in |
| Shank Style | Straight |
| Tools Product Type | Power Tool |
Reviews (75)
75 reviews for Milwaukee 9/16 in. Titanium Silver and Deming Drill Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-32-2100
Drill Bits
Model# DW2535
Drill Bits
Milwaukee Selfeed High-Speed Steel Wood Boring Bit Set (7-Piece)
Model# 49-22-0130
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Drill Bits
Model# DW2735P
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# 282303
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Elyssa Doyle (verified owner) –
Cut right through the steel.
Landen Hermann (verified owner) –
Works well but wears out quickly. Better then most I have used.
Yadira O’Keefe (verified owner) –
Cut very quickly, and clean. Did not need to punch a start point. Used variable speed drill, and was able to drill without wandering for where I wanted to drill.
Abe Tillman (verified owner) –
I used this bit to make new holes in a yellow guard rail at work. The bit ate through the metal.
Gloria Ortiz (verified owner) –
This drill bit is pricey but it cut through the steel I needed to drill very well, very pleased with the quality
Nathanial Johnson (verified owner) –
I bought the Milwaukee Titanium 3/4 inch drill bit because I knew it to be strong enough to pierce the railroad chunk for the “Hardy hole” that will be in the anvil that l’m building. I went through yesterday with ease. Didn’t leave any chips or scratches in the bit. I’m very pleased with this product.
Nigel Johns (verified owner) –
This drill bit fit my needs.
Nia DuBuque (verified owner) –
Worked through quickly
Rey Murray (verified owner) –
This drill bit performed well as expected. I was able to drill through a 3/8 inch steel plate very quickly.
Sanford Hill (verified owner) –
Very good product, I was putting up a tooth bar in a 48” bucket, it gave me no problem.
Hermann Jenkins (verified owner) –
I bought 3/4 and 5/8 and the first hole the 5/8 chipped the cutting edge and had to through out but the 3/4 lasted through the 5 holes I made. Expensive
Sadie Goldner (verified owner) –
Got the job done
Reggie Kertzmann (verified owner) –
Stayed sharp even after 8 holes in 1/16” metal plate!
Bruce Wolf (verified owner) –
Worked as expected!
Stewart Bechtelar (verified owner) –
This did the trick!!
Bethany Lubowitz (verified owner) –
This drill bit out performed my cheaper titanium bits hands down when drilling steel pipe.
Hattie Luettgen (verified owner) –
Did the job was satisfied
Berry Beier (verified owner) –
One of the best bit,and I will recommend this tool
Monte Nicolas (verified owner) –
It got the job done. I had to cut through hardened steel and it cut through easily except at the end it got stuck and broke in half. Luckily for me i had an extra 5/8 that was burnt out to deburr and get the hole finished up. Expensive bit for something that easily broke.
Ben Kris (verified owner) –
Had to drill out four holes on my sons Jeep. The original hole’s was one half inch in diameter. So it worked, I would have liked to have a reamer But it worked.