Milwaukee 3/4 in. Titanium Silver and Deming Drill Bit
$30.84
Complete your drilling job effortlessly with the selection of this Milwaukee #8 Titanium Silver and Deming Drill Bit.
In stock
Description
Milwaukee Titanium S and D bit is engineered with 135° split point delivers a precision start and prevents walking for fast, accurate holes. The additional of the Secure Grip 3-flat shank prevents slipping in corded and cordless applications. Titanium coating is ideal for metal applications to give you up to extended life over Black Oxide but can be used in all applications.
- 135° split point for precision start no walking
- Secure grip
- Titanium coating for extended life
- Cobalt steel 10x life versus black oxide
- 3-flat shank
- 6 in. length
- Limited Lifetime Warranty
Additional information
| Weight | .28 lbs |
|---|---|
| Dimensions | 7.75 × 1.00 × 2.00 in |
| Assembled Depth (in.) | 0.75 in |
| Assembled Height (in.) | 0.75 in |
| Assembled Width (in.) | 6.00 in |
| Bit Diameter | 3/4 in |
| Bit Length (in.) | 6 |
| Bit Material | Titanium |
| Drill Bit Type | Twist |
| Drill Bit Type(s) Included | Twist |
| Individual/Set | Individual |
| Material Application | Aluminum, Cast Iron, Duct/Sheet Metal, Stainless Steel, Steel |
| Model | 48-89-4640 |
| Self-Feeding | No |
| Shank Diameter | 1/2 in |
| Shank Style | Straight |
| Tools Product Type | Power Tool |
Reviews (75)
75 reviews for Milwaukee 3/4 in. Titanium Silver and Deming Drill Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 282269
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# DW2162
Drill Bits
Model# DW2043 Z
Drill Bits
Milwaukee Selfeed High-Speed Steel Wood Boring Bit Set (7-Piece)
Model# 49-22-0130
Drill Bits
Model# 282303
Asa Haley (verified owner) –
Buzzed right through 1/4 inch steel like butter. Very good quality and performance. Well worth the extra few dollars, over a competitive brand.
Adelbert Kuhic (verified owner) –
Bit started center and held it. Smooth cut through 1/2 steel for 30 holes. Slow speed on drill press with cutting oil. Still rolling out pig tails on the last hole.
Zita Streich (verified owner) –
Very good product, I was putting up a tooth bar in a 48” bucket, it gave me no problem.
Eveline Kuhic (verified owner) –
Worked great on steel pipe
Aletha Breitenberg (verified owner) –
Works great but Milwaukee is bit proud of their price.
Deion Watsica (verified owner) –
Bought drill to enlarge hole in trailer hitch with drill press. At med speed, cut hole perfectly without any binding, chipping or over-heating.
Kenny Hane (verified owner) –
Works well for drilling metal. Quite pricey though.
Krista Glover (verified owner) –
It got the job done. I had to cut through hardened steel and it cut through easily except at the end it got stuck and broke in half. Luckily for me i had an extra 5/8 that was burnt out to deburr and get the hole finished up. Expensive bit for something that easily broke.
Darian Hayes (verified owner) –
The bit performs like a pro, drill right thru 3/8 thick plate
Carrie Haag (verified owner) –
it worked
Glen Marks (verified owner) –
I give this 5 stars because I believe it would have done the job I needed it for but it actually wouldnt fit in my drill chuck. Make sure you have a large drill chuck to use for this bit.
Meredith Mills (verified owner) –
The bit worked very well on heavy steel
Vernice Kuhic (verified owner) –
Worked as expected
Dusty Feil (verified owner) –
This drill bit was purchased to drill through mild steel. It cut right through 3/16” mild steel.There was hardly any degradation of the bit. I used it for about two hours. Very impressed.
Bernardo Bernier (verified owner) –
It’s not worth 25 dollars