Milwaukee SHOCKWAVE 8 in.- 32 in. Steel Drill Tap Bit
$7.84
Bring a durable addition to your commercial space with the selection of this affordably priced Milwaukee SHOCKWAVE Steel Drill Tap Bit.
Only 10 left in stock
Description
The Milwaukee SHOCKWAVE 8 in. to 32 in. UNC Impact Drill Tap Bits tap and drill at the same time. The bits features 32 threads per inch and is intended for use in up to 1/4 in. metal. The drill and tap bits have laser etched sizes for easy size identification. The tap drill bit is designed for use in Impact Drivers and Drill Drivers.
- Ideal for drilling and tapping
- 8-32 UNC
- 32 TPI
- Laser etched size for easy size identification
- 1/4 in. quick change hex shank
- Designed for use in impact drivers and drill drivers
- For use in up to 1/4 in. metal
Additional information
| Weight | 0.029 lbs |
|---|---|
| Dimensions | 0.30 × 5.75 × 1.87 in |
| Assembled Depth (in.) | 0.25 in |
| Assembled Height (in.) | 2.03 in |
| Assembled Width (in.) | 0.25 in |
| Bit Length (in.) | 2.03 |
| Bit Material | Steel |
| Drill Bit Type | Specialty |
| Drill Bit Type(s) Included | Specialty |
| Individual/Set | Individual |
| Material Application | Angle Iron, Duct/Sheet Metal, Steel |
| Model | 48-89-4870 |
| Self-Feeding | Yes |
| Shank Diameter | 1/4 in |
| Shank Style | Hex |
Reviews (22)
22 reviews for Milwaukee SHOCKWAVE 8 in.- 32 in. Steel Drill Tap Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2535
Drill Bits
Model# 282303
Drill Bits
Model# DW2542
Drill Bits
Model# 282269
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# FB-005
Drill Bits
Model# DW2735P
Drill Bits
Model# FB-007
Brycen Willms (verified owner) –
Cut like butta
Kaya Nader (verified owner) –
Excellent, well manufactured bit for simultaneous metal drilling and tapping. The bit starts out quickly without walking across the surface and does not need a tap point to hold in place. If your material is thick enough to hold it, you can even countersink the hole all in the same motion with one bit. I have not experienced any noticeable flaking from the bit. It does not need oil to drill.