Milwaukee Hole Dozer Carbide Hole Saw Set (8-Piece)
$97.83
Update your home with this Milwaukee Hole Dozer Carbide Hole Saw Set
In stock
Description
Milwaukee Hole Dozer with Carbide Teeth hole saws provide 50X Life in Extreme Multi-Material cutting applications when compared to bi-metal hole saws. Built utilizing a tough carbide grade combined with a durable 4TPI design, yielding the best tooth durability and longest life in Stainless Steel, Abrasive Materials and Fastener Embedded Wood. Cutting depth is 1.62 in., allowing clearance to handle cuts in all materials. With a Thermoset Coating to reduce friction and drag during cutting, users benefit from faster cutting and increased cordless efficiency. Slug removal is made easy with the Plug Jack T-Slot’s. Plug Jack enhanced user productivity by providing best access and leverage to remove material slugs. Hole dozer with carbide teeth.
- Milwaukee carbide teeth technology
- 4-TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-jack T-slots enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: 4-hole saws: 7/8 in., 1-1/2 in., 2 in., 2-1/2 in., 2 arbors: 49-56-7010, 49-56-9100, 2 pilot bits, 1 hex key
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 3.45 × 8.95 × 9.25 in |
| Arbor included | Yes |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Bit Extender/ Holder, Brad/Pilot Point, Hole Saw |
| Drilling Depth (in) | 1.62 |
| Individual/Set | Set |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 3/8 In. |
| Model | 49-22-3075 |
| Number of Pieces | 8 |
| Pilot Bit Included | Yes |
| Shank Style | Hex |
| Teeth Per Inch | 4 |
Reviews (44)
44 reviews for Milwaukee Hole Dozer Carbide Hole Saw Set (8-Piece)
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Milwaukee Selfeed High-Speed Steel Wood Boring Bit Set (7-Piece)
Model# 49-22-0130
Drill Bits
Model# 49-56-0247
Drill Bits
Model# DW2542
Drill Bits
Model# FB-007
Drill Bits
Model# 48-25-2122
Drill Bits
Model# DW2735P
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# 48-25-2252
Kody Okuneva (verified owner) –
This is a great set of hole saws. What I use them for is a little different than what most people use them for, but I do a lot of wooden toy building with wooden wheels of different sizes. It was always a hassle to use my adjustable cutter to make different size wheels for a toy. These hole saw makes it super easy and accurate every time. Just a matter of exchanging blades to make different sizes. The wheels are easy to remove from the blades just by unscrewing the blade from the center drill and slide out. Gives me a nice clean cut with the axle hole dead center, only thing left to do is sand them a little and stain and ready to go on the toy.
Nash Effertz (verified owner) –
The Milwaukee carbide 12 piece hole set exceeded expectations. It cut hole in wood like a hot knife through butter and efficiently/quickly correct holes through metals.
Nathan Stroman (verified owner) –
Gets the job done well done
Marvin Hamill (verified owner) –
Have had several of these kits in the years as a DIYer, but this seems to be the best so far.Plastic box contains the saws in an orderly fashion, has space for additional smaller than 7/8th saws, and the locking mechanism is sturdy as this bounces around the back of my truck.Past sets were not painted, and as these are white painted, there is a residue buildup the first few times the drills are used.Saws are easy to attach / remove with the supplied tool. May be difficult if the same saw is used for a long time and gets jammed in the locking mechanism.The only negative I saw was that for 6 of the 8 saws there were bulging teeth at the weld site. I used a plier to set them back and there was no discernable issue with the hole cutting.
Rhiannon Fritsch (verified owner) –
Great product, thought the kit came with all the sizes opened it and half the dozers are missing.
Montana Mitchell (verified owner) –
I’ve generally considered hole saws to be a somewhat disposable tool, having experienced so many in the past that became uselessly dull after only a few cuts. Especially when working with hardwoods or metals. These hole saws from Milwaukee may change my attitude. They’re carbide tipped, giving them a durability that the standard steel saws don’t have. Just to test them, I made multiple cuts in some scrap hard maple flooring I had lying around with no signs of dulling. The cuts were quick, clean, and generated minimal heat. The included guide drills and hardware are well designed and allow for easy changing to a different size hole saw. Overall, another fine product from Milwaukee – highly recommended!
Orlo Pfeffer (verified owner) –
This Milwaukee Hole Dozer Carbide Hole Saw set is one of the best investments I have ever made. One with just one set of hole saws I can easily work with both metal and wood. The carbide tips on the saws “teeth” extend the life of each saw many times over. The coating on the outer part of the hole saw reduces friction and provides some cooling properties. This set provides all of the essential sizes necessary to do any job you may encounter. The saws hole cutting ability is excellent with very little tear out along the sides of the holes when drilling in wood.
Jesus Durgan (verified owner) –
The carbide kit is so much better than the normal bimetal kit it’s not even a contest. I have been abusing these things going through metal and drywall and they all look like they stil have brand new teeth. I also think milwaukee changed the coating on them cause they don’t leave colored residue on the sides of the finished holes anymore
Nathen Hermiston (verified owner) –
These carbide tipped hole saws work well on wood AND metal which is a plus compared to standard hole saws that are designed to cut softer materials like wood, drywall and plastic. I was drilling a hole for a surveillance camera mount with a flat blade spade drill when I hit a nail. I switched to this Milwaukee hole saw and completed the cut with little effort. Because of the nail, I destroyed the cutting edge on the spade drill but did no damage to the hole saw blade. I’m glad I got this set and will be adding additional saw sizes. The case makes it easy and convenient to keep all saws and mandrels in one location.
Melyssa Keeling (verified owner) –
The Milwaukee Dozer Carbide 13-Piece Hole Saw Set is a nice kit. I could have really used it about 2 days before it arrived. That only proves that Murphy is alive and well. The case is nice. Two different arbors were included, one for smaller hole saws and one for the larger sizes where they are held by pins. There were spare drills included for the arbors. The sizes on the sides of the individual hole saws were hard to read so I took an ultra fine permanent marker and went over the indented size numbers and that helped. I only did the inch sizes and may do the millimeter sizes if needed. The following sizes were included, inches – (mm): 7/8 – (22), 1 – (25), 1-1/8 – (29), 1-3/8 – (35), 1-3/4 – (44), 2 – (51), 2-1/4 – (57), and 2-1/2 – (64). All in all, a very nice hole saw kit.
Tianna Langosh (verified owner) –
The carbide kit is so much better than the normal bimetal kit it’s not even a contest. I have been abusing these things going through metal and drywall and they all look like they stil have brand new teeth. I also think milwaukee changed the coating on them cause they don’t leave colored residue on the sides of the finished holes anymore
Laurine Kub (verified owner) –
The Milwaukee Hole Dozer Carbide Tooth Hole Saw Set (8-Piece) is an impressive tool set. It features hole saw bits with carbide teeth that can handle materials that will quickly destroy normal hole saws. You can safely cut all woods, plastics, most metals (including stainless steel), roofing shingles, and even fiber-cement board. This kit includes an easy to use quick-release bayonet-stud style of arbor for the larger hole saws and a quick screw-on one for smaller size hole saw bits. It comes in a heavy duty blow-molded carry case that is well organized and has room for quite a few more hole saw bits. This kit only has four sizes of hole saw bits but you can get additional saw bits or even more complete sets from Milwaukee and the Home Depot. I’ll be getting more bits as I need them.
Aubree Cummerata (verified owner) –
The Milwaukee Hole Dozer with Carbide Teeth is a high quality set of hole saws. It definitely lives up to the brand name. This set includes 8 saws from 7/8” through 2 1/2” with two arbors, two extra pilot bits and an allen wrench. The smaller arbor will fit the 3 smaller diameter saws (7/8”, 1” and 1 1/8”) and will fit into a 3/8” drill. The larger arbor for the larger saws (1 3/8” through 2 1/2”) will require drill with a 1/2” chuck. The larger arbor has an easy to operate locking mechanism to secure the saw. The carbide teeth will allow cutting through much harder material without damage. The set comes in a heavy duty plastic box that stores each part in their place. The set is made in the USA.This set should give many years of service without any issues. One feature that I am very pleased with is what is called the Plug Jack T-slots. On many of the other brands of hole saws one of the hardest thing to do is extract the plug from the saw after cutting through. These slots enable the insertion of a screwdriver or similar device under the plug and easily pop them out. These also cut to a depth of 1.62” allowing a clean hole in 1 1/2” lumber.This has been a great addition to my tools by finally giving me a quality set of hole saws, and I would highly recommend them.
Ed Greenholt (verified owner) –
So far so good, I only made a few 2½” holes for pipe through 2×6’s. I hope they last because they’re fairly expensive
Josie Lockman (verified owner) –
This is an incredible Milwaukee Carbide Teeth 13-Piece hole saw set that is made in the USA. With about 9 hole saw sizes in one heavy duty storage box, this set will cover any project that could come up for a life time. I have never seen a hole saw product that has so many features with so much quality. They can cut to a depth of over 1.6 in. They have “plug jack T-slots” that make it easy to remove material from the saw after the hole has been drilled.
Citlalli Watsica (verified owner) –
The Milwaukee Hole Dozer Carbide Hole Saw Set (13-Piece) Model # 49-22-3090 incorporates 4 TPI carbide teeth design for durability and long life. These saws are capable of Multi-Material cutting of stainless steel, wood, cement board, fiberglass, plaster, asphalt shingles and more. This set includes 8 hole saws: 7/8 in., 1 in., 1-1/8 in., 1-3/8 in., 1-3/4 in., 2 in., 2-1/4 in., 2-1/2 in., 2 arbors: 49-56-7010, 49-56-9100, 2 pilot bits, 1 hex key. Made in USA, Milwaukee supports their product with a Limited Lifetime Warranty.
Kaleigh Schumm (verified owner) –
Being a do it yourself’er you just never know when your going to need to cut a hole in wood, wallboard or some other material. So go these to while doing a project. As you can see my the picture plenty of sizes. The largest bit fit on my small hand held drill with no problem. Each hole saw comes with a drill bit and set into your drill head. Learned through a couple of practice holes the best way is slow and easy. Great set for the DIY’er.
Johnnie Kohler (verified owner) –
Great product. Needed a hole saw kit badly but didn’t want to break the bank. Signed up for Home Depot daily deals/emails and waited until this hit the daily deals. At 40% off it is a great purchase although I wouldn’t buy at full price
Lexus Leffler (verified owner) –
It didn’t come with the sizes listed on the front, so when i bought the in between sizes i ended up with doubles. Pretty disappointing.
Nelda McDermott (verified owner) –
We are getting ready to remodel the house and enclose our carport. This will come in very handy. The price was right too …. it was a deal of the day …. just too good to pass up.