The Milwaukee 9-Piece Bi-Metal General-Purpose HOLE DOZER Hole Saw Kit is engineered for longer life and faster cutting performance and is the Most Durable Hole Saw. The kit comes with 5 hole saw blades in 5 sizes: 1 in., 1-1/4 in., 1-1/2 in., 2 in. and 2-1/2 in. The hole saws feature RIP GUARD teeth built with more steel behind the cutting edge for added strength. The teeth give increased productivity on the job site and better hole quality. They are also backed by a limited lifetime tooth break warranty. Each HOLE DOZER is coated with a low friction, thermoset paint that provides a faster cutting speed in wood and more holes cut per battery charge. The hole saw kit comes with a Plug Jack featuring an all access slot design that allows for full access during plug removal. The Plug Jack enables access into the cup for both thick thin material removal, eliminating wasted downtime between holes.
- Most durable hole saw; period; comes with a limited lifetime tooth break warranty
- Features RIP GUARD teeth, teeth built with more steel behind the cutting edge for added durability
- Coated with a low friction, thermoset paint that provides faster cutting speed in wood and more holes cut per battery charge
- Equipped with plug jack, an all-access slot design for fast plug removal
- Features bi-metal construction with 8% cobalt for increased wear resistance
- Cuts through clean wood, nail embedded wood, plastic, aluminum, metal and stainless steel
- Includes: (1) 1 in. bi-metal hole saw, (1) 1-1/4 in. bi-metal hole saw, (1) 1-1-2 in. Hole Dozer bi-metal hole saw, (1) 2 in. bi-metal hole saw, (1) 2-1/2 in. Hole Dozer bi-metal hole saw, (1) 3/8 in. hex shank arbor, (2) 3-1/2 in. pilot bit, (1) arbor spacer, (1) arbor adapter, (1) 1/8 in. hex key
Ethel Glover (verified owner) –
The Hole saw that I used worked great.
Kyleigh Boyer (verified owner) –
Did the job , little costly
Luciano Feeney (verified owner) –
Drills good and fairly fast
Jena Huel (verified owner) –
They really did the job I needed done. It cut through 1/4 “ plastic like butter. Very pleased with my purchase.
Tanya Bruen (verified owner) –
Nice package for saw set…well made as always for a Milwaukee product.
Maegan Wilderman (verified owner) –
Works well,easy to use
Jade Prohaska (verified owner) –
Good quality works great
Lela Wolf (verified owner) –
I returned this when I realized it had no pins or anything to drive the blade, other than just being threaded on.
Floy Green (verified owner) –
Why isn’t excellent enough?
Eldridge Runolfsson (verified owner) –
No instructions but you can logically figure out how to put it together but taking it apart is horrible. To take the blade off you will need a tabletop vise, large screwdriver and cordless driver(with hammer action). I place the screwdriver through the holes in the saw and open up the vise so it can stop the screwdriver from turning. Then I use a 11/32 6 point bit driver on my electric driver in reverse. The blade will come off easily. Annoyingly the adapter for the larger hole saw still stuck on the arbor will not allow the case to close.. so go back to the vice and clamp the vice down hard on the adapter and spin it off with the electric driver as well. Now everything is disassembled and goes back in the box.To date I have not had the arbor adapter stuck in the saw, if that happens to me my plan is to put the adapter in the vise like before but use a long screwdriver through the blade holes to twist it off.Kudos to Milwaukee, who makes a lot of great things, to manage to make a great hole saw a horrible product because of the arbor and case. I rated it average because I used it and figured out how to get it apart and I had everything on hand to do it. The hole saws are excellent! a) This thing needs some instructionsb) The case design should allow the adapter to remain on the arbor and close. Why? I normally use larger hole saws and seldom use the smaller ones so I would like to keep that attached. A simple case design tweak could accommodate this. c) Desktop vise and driver should be listed as additional tools required.. Unless you have better instructions.d) Also need a driver instead of the 1/8 hex key. I tried using the hex key to the point where I thought it would break and hurt myself.I realize you sell much better arbors separate from this but my use case does not justify it and I wanted a self contained kit with these blades.Please take the feedback seriously.
Ardella McLaughlin (verified owner) –
Because only came with 1 bit
Colby Will (verified owner) –
As always with Milwaukee, great quality!
Darius Farrell (verified owner) –
Quality from milwaukee always
Wilma Kilback (verified owner) –
A gift and I like that it’s for wood and metal.
Maureen Corwin (verified owner) –
You can trust Milwaukee products. Naturally I checked them out first and I found a nice 9 piece set with a case that exactly fit my needs. I have already used it and these dozers are awesome.
Ayden Olson (verified owner) –
Great deal currently. Wish the arbor had pins to keep it from locking onto the hole saws which have the pin holes
Jed Denesik (verified owner) –
Sent it back got the 20 piece instead which is the best value for a Dozer set
Maximus Hodkiewicz (verified owner) –
These hole drills are extra deep – which is why I ordered them. My other hole drills are quite a bit shorter.
Sean Streich (verified owner) –
Me gustó lo suave que se siente
Beaulah Homenick (verified owner) –
Not sure what to say. Either these serve their purpose or they don’t, and these did. The sizes in the kit were just what I needed for a basic project.