Milwaukee 4 in. Carbide Recessed Light Hole Saw With Pilot Bit
$36.87
Use this 4-3/8 in. hole saw to carve round holes in your ceiling for 4 in. recessed-lighting fixtures. Constructed with solid welded steel and crafted with a carbide-grit edge, this drill attachment will pierce through drywall and sheetrock to make recessed-lighting installation a breeze. It includes a pilot bit to mark the center of your light-fixture cutout and keep the blade on target.
In stock
Description
Use this 4-3/8 in. hole saw to carve round holes in your ceiling for 4 in. recessed-lighting fixtures. Constructed with solid welded steel and crafted with a carbide-grit edge, this drill attachment will pierce through drywall and sheetrock to make recessed-lighting installation a breeze. It includes a pilot bit to mark the center of your light-fixture cutout and keep the blade on target.
- Use to install 4 in. recessed light fixtures requiring a 4-3/8 in. hole
- Solid welded-steel construction helps provide accurately sized holes
- Won’t tear material and leaves a clean finish
- Kit includes hole saw and pilot bit
Additional information
| Weight | .87 lbs |
|---|---|
| Dimensions | 8.60 × 5.20 × 1.70 in |
| Arbor included | No |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.5 |
| Hole Saw Diameter (in) | 4" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-0300 |
| Pilot Bit Included | Yes |
| Shank Style | Hex |
| Teeth Per Inch | Grit |
| Tools Product Type | Power Tool |
Reviews (81)
81 reviews for Milwaukee 4 in. Carbide Recessed Light Hole Saw With Pilot Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 282303
Drill Bits
Model# 48-20-8852
Drill Bits
Model# 282269
Drill Bits
Model# DW2535
Drill Bits
Model# 49-56-7010
Drill Bits
Model# FB-007
Drill Bits
Model# DW2542
Drill Bits
Model# DW2045 G
Annette Emard (verified owner) –
I think it will work great on sheetrock and fiberglass. I thought I was going to be drilling through fiberglass in my boat but turns out it was actually 3/16″ aluminum covered by carpet. The bits made it through for the two speaker holes I needed but most of the carbide grit was worn off and I trashed the bit. Looks like there are also teeth under the carbide so I may get more use out of it. It’s a quality heavy duty bit for what is intended for.