Milwaukee 5-3/8 in. Carbide Recessed Light Hole Saw With Pilot Bit
$35.34
The Milwaukee 5-3/8 in. Recessed Light Hole Saw comes with solid, welded bi-metal construction. This recessed light hole saw features wide, angled offset slots for convenient plug access. It provides long lasting usage.
In stock
Description
Milwaukee recessed light hole saws are manufactured using carbide grit for cutting through drywall, plaster, acoustical tile, wood and stucco with mesh. Made with a continual rim, these saws wont’ tear material and will leave a clean finish. Solid, welded construction provides accurately sized holes. Features an open back for easy plug removal.
- Ice hardened cryogenically treated for up to 50% longer life
- Optimized tooth form for up to 2x faster cutting
- Wide, angled and offset slots for easy plug access
- Bi-metal construction with 8% cobalt for increased wear resistance
Additional information
| Weight | 1.15 lbs |
|---|---|
| Dimensions | 1.57 × 7.68 × 10.63 in |
| Arbor Size | 0 |
| Material Cut | Multi-Purpose |
| Teeth Per Inch | Grit |
| Shank Style | Hex |
| Shank Diameter | 1/5 in. |
| Pilot Bit Included | Yes |
| Model | 49-56-0303 |
| Min Chuck Size Required | 1/4 In. |
| Individual/Set | Individual |
| Arbor included | No |
| Hole Saw Diameter (in) | 5-1/4" |
| Drilling Depth (in) | 1.5 |
| Drill Bit Type(s) Included | Hole Saw |
| Drill Bit Type | Hole Saw |
| Bit Material | Carbide |
| Bit Length (in.) | 2 |
| Bit Diameter | 5-3/8 in |
| Tools Product Type | Power Tool |
Reviews (80)
80 reviews for Milwaukee 5-3/8 in. Carbide Recessed Light Hole Saw With Pilot Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# FB-015
Drill Bits
Model# 48-32-2100
Drill Bits
Model# 48-28-1010
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# FB-007
Drill Bits
Model# 282269
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# FB-005
Allan Weissnat (verified owner) –
Works great. Hole is on the smaller side but is better than being too big.
Gudrun Borer (verified owner) –
Used over and over to drill through wet plaster in a 1936 house. Fast to drill, smooth and clean.
Coty Ledner (verified owner) –
it is perfect the quality of work very good ideal for clean cuts the value is incredible for its performance
Madaline Dibbert (verified owner) –
Highly recommend
Lolita Howe (verified owner) –
Cut through my 1950s tough as nails ceiling without issue
Alejandrin Daugherty (verified owner) –
did the job
Germaine Kuphal (verified owner) –
Smooth, fast, sharp, clean, and easy cuts into ceiling drywall. No time spent cleaning up the edge, which is easily hidden under the rim of the can light bezel.
Euna Strosin (verified owner) –
Worked as expected from Milwaukee. Installed eight recessed cans to a perfect fit.
Dawn Kunde (verified owner) –
Works perfectly for 4 inch remodel recessed cans.
Emie Stanton (verified owner) –
Not as good as some other carbide tipped hole saws
Jamarcus Paucek (verified owner) –
Cuts through plaster and drywall quickly and easily. This however left a hole that is too small for 5″ retrofit can. Seemed to be about 1/8″ too small.
Treva Gusikowski (verified owner) –
Great for lathe and plaster.
Arvilla Collier (verified owner) –
It’s about a quarter inch too big for 5 inch recessed light kits
Sunny Wilkinson (verified owner) –
I bought this for its size and used it to cut a precise hole in the composite deck of my boat. I wanted to create an access port to the through the deck. This hole saw easily carved the composite fiberglass structure even though it is intended to cut through plasterboard. I have a nice neat hole that will easily accommodate the access plate.Another quality Milwaukee tool!
Randi O’Reilly (verified owner) –
I purchased this product because I needed to make some holes through 1/4 inch plywood to install some recessed lights. Let me just say that it worked great, made the cut smooth,accurate and with ease. I would definitely recommend this product. The only thing is that you have to purchase an arbor separately but other than that it’s a great buy.
Allie Schneider (verified owner) –
Used on wood ceilings. 6″ remodel cans fit perfect. Wish I would have bought one a lot sooner.Saved lots of time and leaves a much cleaner hole than a saw saz.
Otis Crona (verified owner) –
Cut a hole in garage to install a exhaust fan worked perfect on stucco
Kelsie Kihn (verified owner) –
I cut 11 holes down through 1/4 wood panel ceiling followed by 1/2” dry wall ceiling. The drill cut through the wood and knifed through the dry wall. The original ceiling was wood paneling. It was nailed to 1×4 furring strips. In many of the hole locations drill had to cut through the furring.
Florencio Rice (verified owner) –
Part worked great, was ontime with shipping. Will use online shopping with HD again
Otilia Sauer (verified owner) –
Great product, makes a mess with drywall, but cuts great