Milwaukee 1-1/4 in. Carbide Grit Hole Saw with Pilot Bit
$7.99
The Milwaukee 1-1/4 in. Carbide-Grit Hole Saw includes a carbide-tipped pilot bit. This hole saw features a coarse grit and segmented edge for fast cutting. Milwaukee carbide grit hole saws are designed for cutting abrasive materials such as brick, block, cement board, fiberglass and tile. Use a carbide tipped pilot bit when cutting ceramic tile, brick, and other abrasive materials.
In stock
Description
The Milwaukee 1-1/4 in. Carbide-Grit Hole Saw includes a carbide-tipped pilot bit. This hole saw features a coarse grit and segmented edge for fast cutting. Milwaukee carbide grit hole saws are designed for cutting abrasive materials such as brick, block, cement board, fiberglass and tile. Use a carbide tipped pilot bit when cutting ceramic tile, brick, and other abrasive materials.
- Requires minimum chuck size of 1/2 in.
- High-speed steel construction with a tungsten-carbide grit edge ideal for cutting abrasive materials
- Coarse grit and segmented edge for fast cutting
- Wide, angled and offset slots for easy plug access
- Includes carbide-tipped pilot bit
Additional information
| Weight | 0.39 lbs |
|---|---|
| Dimensions | 2.50 × 3.00 × 7.00 in |
| Arbor Size | 0.25 |
| Material Cut | Multi-Purpose |
| Teeth Per Inch | 8 |
| Shank Style | Hex |
| Shank Diameter | 2 in |
| Pilot Bit Included | Yes |
| Model | 49-56-0422 |
| Min Chuck Size Required | 1/2 In. |
| Individual/Set | Individual |
| Arbor included | No |
| Hole Saw Diameter (in) | 1-1/4" |
| Drilling Depth (in) | 1.8 |
| Drill Bit Type(s) Included | Hole Saw |
| Drill Bit Type | Hole Saw |
| Bit Material | High Speed Steel |
| Bit Length (in.) | 2.5 |
| Bit Diameter | 2 in |
| Tools Product Type | Power Tool |
Reviews (39)
39 reviews for Milwaukee 1-1/4 in. Carbide Grit Hole Saw with Pilot Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# FB-015
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# DW2045 G
Drill Bits
Model# FB-003
Drill Bits
Model# 48-28-1010
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Melba Heller (verified owner) –
just what I needed to run conduit through the stucco wall. nice clean hole.
Merritt Jacobi (verified owner) –
I’ve used other masonary hole bits that did not do nearly as well, this one is built with good, thick steel and heavy carbide on the cutting edges. Goes through concrete well, some of the rocks not so good 🙂 .
Bernita Murray (verified owner) –
Worked like a charm to cut holes through tile and green board to install grab bars in a shower. Be sure to use a punch to divot the tile first so the bit doesn’t slide.
Elroy Kub (verified owner) –
I used this with their 3/8 inch arbor (which you will need, this doesn’t come with one) to drill a hole through brick and cinder block for a high efficiency furnace exhaust. Worked perfectly. You’ll need a powerful drill but it does the job. Fits a 2” PVC perfectly. Used hydraulic cement to seal around it. Only used it once so your mileage may vary
Raymond Walsh (verified owner) –
This bit cut through almost 8 in of gunite total between my main pool area and the spa until I hit rebar it still has some life to it but it did its job. Worth the money
Lilyan Willms (verified owner) –
No other hole saw I have ever used makes the hole, as accurate and as smooth as I want it to be. In the picture you may note the layers/levels of the leaves. With this Carbide Grit Hole Saws smooth and accurate holes sealing and gluing is now a “Snap!” A real time-saver-money-maker.
Nola Glover (verified owner) –
I purchased this to make holes in a concrete basement wall to install a port for water line. It fit my standard Ridgid arbor just fine which made it even more economical. It really cut good using a 3/8″ cordless drill. The only question lingering in my mind is “why did they put a wood cutting bit in a carbide-grit hole saw?” I changed it to a 1/4″ masonry bit which is much more appropriate for material where a carbide grit saw would be needed!
Deonte Labadie (verified owner) –
Its a great bit and a good price but I would just like to say the center taping bit is not carbide dipped and thats frustrating for me personally.My job went well with the product I would reccommend it to others.COOL with water while cutting!
Salma Cummings (verified owner) –
Fast dlvry…easy pick-up..will use Again
Noah Tillman (verified owner) –
I had to drill through my brick siding to run some conduit and I was pretty impressed with this hole saw. Running it at a lower speed and water cooling it helped.
Elda Tromp (verified owner) –
Needed holes in a concrete block for a pipe. I used a little water as I drilled, and this quickly made two nice, clean holes. Since I have only drilled the two, I can’t speak to how long it will last, but for the price it was worth it just for the two holes (I already had access to the arbor I needed). I didn’t want to beat out a hole or use a small bit to make a circle. I have seen this done, and either option makes for an ugly, rough hole. I was installing a 3/4 PVC LB conduit body, and this 1-1/4″ hole size made a perfect fit for the fitting part of the conduit body to slide in, with just a little caulk to seal it.
Christ Walker (verified owner) –
Cut Through a 2″ water meter lid just fine. Took about 10 minutes. Works better with water. That was not mentioned on the package. That’s why only four stars.
Lilian Mueller (verified owner) –
i bought one for a job that im currently doing to make 1 3/8 holes so far i made over 30 hole with the same holes saw and pilot bit , on cement block no water needed. i been an electrician for over 15 years , all it takes is a little knowledge of how to use the right tools. highly recommended.
Vaughn Tromp (verified owner) –
Easy to assemble and use. Performed admirably given the task it was used for. We were boring multiple holes in fire brick for use in a forge. This bit did a great job. We did not utilize the pilot bit and had a hole template made of wood for guiding the hole saw, making multiple holes in each brick. Given the number of holes and bricks we only destroyed 1 of the two bits purchased.
Rosemary Turner (verified owner) –
Drill a 1 !/4 hole in 4″ of cement .Had to keep adding water. Took one hour + hole saw still good enough to do another hole if I need to
Velda Kunze (verified owner) –
Have used these hole saws in various sizes and they work great.I don’t know if they are designed to run in hammer drills or not, but that is how I use them.Run it somewhat slow and they do wonders.
Cassandre Torphy (verified owner) –
I used it on a cement block wall. It cut thru the block quickly and smoothly. Good tool to add to your tool box.
Wyman Harris (verified owner) –
Tried bi-metal hole saw to cut hole in stucco. One hole and teeth were gone. Tried this hole saw and worked well. Cut five holes in stucco and can hardly see any wear on carbide teeth. Recommend it for cementitious materials.
Brad King (verified owner) –
Great quality product.
Lupe Rodriguez (verified owner) –
Cuts very well through brick and mortar. Fast and efficient. I ordered online with in-store pickup, which was very convenient too.