Milwaukee 2 in. Carbide Grit Hole Saw with Pilot Bit
$18.38
Cut perfect 2 in. circles into a variety of abrasive materials with this Carbide Grit Hole Saw from Milwaukee. Constructed with a tungsten carbide grit edge, it saws holes into tile, fiberglass, brick, cement board and block to produce round cutouts commonly needed for plumbing or electrical conduits. A carbide-tipped pilot drill bit is included to keep cuts straight and centered.
In stock
Description
Cut perfect 2 in. circles into a variety of abrasive materials with this Carbide Grit Hole Saw from Milwaukee. Constructed with a tungsten carbide grit edge, it saws holes into tile, fiberglass, brick, cement board and block to produce round cutouts commonly needed for plumbing or electrical conduits. A carbide-tipped pilot drill bit is included to keep cuts straight and centered.
- Cuts 2 in. diameter holes into tile and a variety of masonry materials
- Fashioned with tungsten carbide grit edge to bore through abrasive materials
- Functions optimally at 600 RPM
- Use with the following Milwaukee arbor models (sold separately): 49-56-7240, 49-56-7250, 49-56-9100, 49-56-7055, 49-56-7040
Additional information
| Weight | .38 lbs |
|---|---|
| Dimensions | 6.95 × 3.50 × 2.70 in |
| Arbor Size | N/A |
| Material Cut | Multi-Purpose |
| Teeth Per Inch | 3 |
| Shank Style | 3-Flat |
| Shank Diameter | 1/4 in |
| Pilot Bit Included | Yes |
| Model | 49-56-0444 |
| Min Chuck Size Required | 1/2 In. |
| Individual/Set | Individual |
| Arbor included | No |
| Hole Saw Diameter (in) | 2" |
| Drilling Depth (in) | 1.8 |
| Drill Bit Type(s) Included | Hole Saw |
| Drill Bit Type | Hole Saw |
| Bit Material | Carbide |
| Bit Length (in.) | 4 |
| Bit Diameter | 1/4 in |
| Tools Product Type | Power Tool |
Reviews (39)
39 reviews for Milwaukee 2 in. Carbide Grit Hole Saw with Pilot Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# FB-015
Drill Bits
Model# DW2735P
Drill Bits
Model# 48-20-8852
Drill Bits
Model# DW2535
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Drill Bits
Model# 48-32-2100
Drill Bits
Model# 48-28-1010
Drill Bits
Model# 48-25-2122
Price Dooley (verified owner) –
Tried bi-metal hole saw to cut hole in stucco. One hole and teeth were gone. Tried this hole saw and worked well. Cut five holes in stucco and can hardly see any wear on carbide teeth. Recommend it for cementitious materials.
Jan Nienow (verified owner) –
Its a great bit and a good price but I would just like to say the center taping bit is not carbide dipped and thats frustrating for me personally.My job went well with the product I would reccommend it to others.COOL with water while cutting!
Olin Cruickshank (verified owner) –
Intended for light duty, shallow holes. Good price, quality fabrication for intended use. Centering bit included. Needs standard hole saw bit mount.
Camylle Fadel (verified owner) –
I haven’t used the drill yet to make a hole in a security screen door screen material. I’m sure it will work just dandy. Thanks
Bret Wuckert (verified owner) –
Have used these hole saws in various sizes and they work great.I don’t know if they are designed to run in hammer drills or not, but that is how I use them.Run it somewhat slow and they do wonders.
Tyrese Schinner (verified owner) –
7/8″ carbide hole saw cut through my stucco wall with exact size for 3/4″ diameter pipe and looks like professional work. Used lite streem of water to cool when cutting to extend bitt life. Just don’t understand why this item isn’t stocked in my local Home Depot stores. Seems most common sizes would be 5/8″ 7/8″ and 1 1/4″.
Wilfredo Murazik (verified owner) –
Did what I had to do….Thank you A+
Eve Blanda (verified owner) –
If the pilot bit was carbide tipped like the hole saw, I would give this combo a 5. But as soon as I drilled deep enough into the tile I was cutting for the hole saw to bite, the job was done in seconds. It’s a very good, quick working hole saw.
Hollis Leuschke (verified owner) –
I used this to cut through 3 inches on concrete for some conduit. I used water to try and keep it cool. I had to dig out the concrete from the saw so I could get through the concrete.
Carlo Rutherford (verified owner) –
The saw bit worked well. Went through the brick wall easily. Happy with the purchase.
Carmine Olson (verified owner) –
This was used to “drill” a hole in 1 1/2″ thick hard stucco, backed by heavy wire mesh. It left a nice clean hole and cut much better than I had anticipated.
Andreane Fahey (verified owner) –
I purchased this to make holes in a concrete basement wall to install a port for water line. It fit my standard Ridgid arbor just fine which made it even more economical. It really cut good using a 3/8″ cordless drill. The only question lingering in my mind is “why did they put a wood cutting bit in a carbide-grit hole saw?” I changed it to a 1/4″ masonry bit which is much more appropriate for material where a carbide grit saw would be needed!
Jennifer Gottlieb (verified owner) –
I used this tool to cut through wood and concrete, it worked great.
Keon Sipes (verified owner) –
I’ve used other masonary hole bits that did not do nearly as well, this one is built with good, thick steel and heavy carbide on the cutting edges. Goes through concrete well, some of the rocks not so good 🙂 .
Harrison Reinger (verified owner) –
Great price- much better than competition. Worked very well. Only four stars because I can’t rate the durability from my experience.I used the bit for one project- to cut through dense laboratory tabletop material (very hard, with sand in it). It cut through 1 inch thickness in about a minute, using only a small cordlless drill, low speed and no coolant. I was enlarging a hole so I couldn’t use a pilot bit. I was able to start the cut without a pilot drill bit, by starting with light pressure at an angle to the surface. This was easier than I expected. Once I got it started, I could gradually tilt the saw up to vertical and increase pressure. It was stable and self guided after that.
Jarrell Collier (verified owner) –
Worked like a charm to cut holes through tile and green board to install grab bars in a shower. Be sure to use a punch to divot the tile first so the bit doesn’t slide.
Hattie Gutkowski (verified owner) –
It cut through 3″ of pool concrete deck easily.
Sheldon Kuhic (verified owner) –
Good price. Good quality.
Buddy Graham (verified owner) –
This bit cut through almost 8 in of gunite total between my main pool area and the spa until I hit rebar it still has some life to it but it did its job. Worth the money