The MILWAUKEE 3/8″ Diamond MAX Hole Saw delivers users up to 10X longer life when cutting tile, stone, and glass. Diamond MAX Hole Saws offer best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved continuous brazed edge provides clean, superior joint strength, and better diamond retention when cutting hard, abrasive materials. The One-Piece Hole Saw has a 1/4″ quick-change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond MAX offers users the lowest cost-per-hole on the market.
- Diamond Max™: Greater durability and toughness delivers up to 10X longer life
- Higher Grade Diamonds and Improved Braze: Provide best-in-class performance
- Large Slug Ejection Slot: Offers easy plug removal
- Versatile: Ideal for cutting anchoring and clearance holes in all tile, stone and glass
- 1/4″ Hex Shank
- Includes (1) 3/8″ Diamond MAX™ Hole Saw
- 30 day Limited Warranty
Fermin Collins (verified owner) –
to say I am impressed by this drill bit is not enough. I have cut through 90 porcelain tiles with one drill bit before it bit the dust. that is over two hours of Drilling. (each tile takes about 1&1/2 minutes to drill through, with stopping to cool down the bit with water ) I think it probably would have lasted longer if i paid more attention to it overheating in the end(lesson learned). If i had taken better care it probably could have cut another 90. so so so worth the money.
Trisha Lockman (verified owner) –
Item did what I bought it for, making holes in some very tough porcelain tile. Finished the project, about 16 holes, and has not worn out yet.
Tevin Miller (verified owner) –
I needed to remove a broken easy out from a broken transmission bolt. This worked better than expected. Second time a bit like this saved me on this project.
Aric Powlowski (verified owner) –
This bit was recommended to drill through porcelain tile for installing a handicapped bar. It was a slow process but the bit performed perfectly. We applied water while drilling and that helped. Would recommend it for anyone needing to drill through tile.
Valerie Monahan (verified owner) –
Works great but only for like two holes and it burned on
Erling Johnson (verified owner) –
I have used “regular”looking drill bits for tile in the past and had to use several bits to drill through tile to hang a shower curtain rod BUT this handy and very strong “hole saw” was easy to use and lasted the whole job with flying colors
Vida Maggio (verified owner) –
Works good, user water and start on an angle. As you cut vary your angle slightly.
Charlie Bahringer (verified owner) –
I used it to drill rocks. It’s not a bad bit but it didn’t last a long as I had hoped. I have gotten cheaper bits that have lasted longer
Kian Doyle (verified owner) –
Cut right through the tile, no chipping or cracking. Saved a lot of time. Excellent.
Carley Considine (verified owner) –
I Cut Through 3′ concrete in two different locations. The hole saw seemed to do an excellent job and cut a nice clean hole. It does not have a pilot bit in the center, so I cut a 1″ hole in a board to use as my Gide. I clamped the board in place, & the hole saw was slow, but steady and clean. I did add a little water to help with the cutting. I wold deffinatly recumbent this hole saw for concrete or tile, possibly granite.
Willis Powlowski (verified owner) –
Great product if you are drilling through something and into tile etc. For example through a porch railing foot and into tile below. If attempting to drill directly into tile with nothing to guide bit I would recommend a sharp point drill bit.
Magnolia Goyette (verified owner) –
Worked great……………………first time ever drilling into ceramic tile and no mistakes!
Amanda Streich (verified owner) –
Works great! I bought other bits but nothing else worked on my porcelain tile. I found these at my local big box store & having trust in the Milwaukee brand tried them out. Couldn’t be happier! Go slow with med pressure & plenty of water. Same story, you get what you paid for.
Lewis Johns (verified owner) –
I wish if it would last longer
Earline Gerhold (verified owner) –
Have used this product before several times and it has proved to be very good. However in this particular case it was not the right bit, Nothing against the product. I did not chose the bit I needed.
Casey Durgan (verified owner) –
Cuts perfect circle in porclean tile
Jules Jast (verified owner) –
it worked great made perfect holes in ceramic tile never cracked the tile
Jaunita Boyer (verified owner) –
Best drill bit for natural stone.
Janae Stokes (verified owner) –
Made the job of cutting a hole in the ceramic tile I used for my shower pipes. This was my first time tiling and this tool made it a breeze! Highly recommend!
Al Pfeffer (verified owner) –
Worked perfectly drilling throough tile.