Milwaukee 3/4 in. Hole Dozer Carbide Hole Saw
$11.99
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 3/4 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .07 lbs |
|---|---|
| Dimensions | 1.00 × 1.94 × 3.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 2.2 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 3/4" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/4 In. |
| Model | 49-56-0702 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 3/4 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2535
Drill Bits
Model# DW2045 G
Drill Bits
Model# FB-005
Drill Bits
Model# DW2043 Z
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# 48-25-2252
Drill Bits
Model# 49-56-0247
Steve Keebler (verified owner) –
Average rating is due to the slight oval shape and sloppy weld of the material. This caused the saw to cut a larger than stated size hole.
Myrtice Larson (verified owner) –
Sometimes you have a need to cut holes through different materials to accomplish a task. I bought one of those portable a/c units, it comes with different options to vent it outside one is through the window and the other is through the wall. I have solar screens on my windows and the air flow was very restricted so I needed to vent through the wall this is where the Hole saw came to the rescue it made the job easy so I recommend this tool highly.
Emmy Little (verified owner) –
Odd size no one carries in the store. Works like it is supposed to. Too bad we couldn’t get it sooner, but it was delivered straight to my house.
Giuseppe Brekke (verified owner) –
Very good
Alycia Emmerich (verified owner) –
I had previously purchased one of these hole saws for my husband and after using it, he asked me to order a few more in different sizes.He says that they are great. They are tough, easy to set up and to remove. He has used plenty in the past that would get 3-4 uses and then dull so badly that they had to be tossed out.These seem to have much greater durability.
Carson Dooley (verified owner) –
Cut 23 circular holes in metal 1/8 thick with no difficulty. Worked great
Nadia Emmerich (verified owner) –
It cleanly cut two holes in 3/16 steel bumper so I could flush mount some LED lights.
Jonathon Fritsch (verified owner) –
Great quality monster hole saw. Drilled smooth through some plywood for some exhaust vents for a roof job. It looks huge on a my drill. The carbide teeth definitely just chew through wood like a hot knife through butter. Of course I had to be careful because the larger a drill bit is, the more risky it is in a bind up. It did not bind up on me at all but still used it with caution. I really like Milwaukee’s pilot bit which I got separate because it has to knobs that secure into the large bit along with the threaded insert. I didn’t have any problem removing the wood from the bit after the cut out which I really liked. I only used it on wood but this hole saw is a beast. Definitely use a decently powered drill. It’s still really sharp and ready for more and even the paint itself held up which is pretty funny. Definitely recommend this line up Milwaukee hole saws because that carbide definitely makes a difference.
Maia Ankunding (verified owner) –
This is a quality product which performed perfectly. I would recommend this product.
Moshe Kassulke (verified owner) –
Did the job cleanly
Margot Dibbert (verified owner) –
Using this to build a large Connect Four for our youth at church. Fairly clean holes in mdf.
Jackie Dickinson (verified owner) –
The Hole Dozer makes a very clean and precise hole, at least in wood. The arbor holes are compatible with the Milwaukee Hole Hawg as well so you can use the arbors from the Hawg kit with the Hole Dozer. When cutting through wood, be careful not to put too much pressure on one side as the saw can grab and stall or spin the wood stock around. The round wood cutting can be easily removed from the saw but there are access ports on the side in case you need to pry it out.
Willard Auer (verified owner) –
WORKED PERFECT FOR WHAT I NEEDED
Rhiannon Boehm (verified owner) –
Did the job. I had a bit of trouble setting the torque correctly.
Lonzo Dooley (verified owner) –
This is a beast of a hole saw. You need something strong when cutting a hole that big and this hole saw fits the bill. Make sure you have a powerful, relatively slow turning drill. The hole saw fits both of my mandrels perfectly and locks in tightly. The carbide tips are sharp and cut quickly through metal or wood. Obviously drywall is not problem The slots on the side make removal of the slug or coupon easier. This was a great addition to my shop.
Aniya Homenick (verified owner) –
I needed to put a faucet hole in a new countertop, but we did not want to have the factory do it because we wanted to have the vessel sink and faucet sitting on the vanity top in our bathroom to decide on where the faucet would be. I used the drilll bit on the chuck to mark the spot for the faucet and we took the top off and cut the hole from the underside. It worked beautifully!
Layne Deckow (verified owner) –
Precision cuts. The quality is top notch.
Timothy Jacobs (verified owner) –
Great holesaw
Allison Fahey (verified owner) –
I used the saw with an arbor that I already had to cut a shower drain hole through 1/4″ Hardieboard plus 3/4″ plywood sub-floor. The carbide saw went through both layers relatively easy when compared to a bi-metal saw that just skimmed the surface. The Oatey drain fit perfectly in the 4-1/2″ hole. Home Depot had the best price and shipping was free and quick.
Tanya Kerluke (verified owner) –
this hole saw cut right thru the steel that I needed a hole in.