The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 1-1/8 in. HOLE DOZER with carbide teeth
Alicia Fahey (verified owner) –
Like hot knife thru butter
Bette Williamson (verified owner) –
I replace a hole saw with the hole saw with Carbide teeth. It works great!. I just hope it lasts for a long time. I will be attempting to replace the hole saws I have with ones that are carbide teeth as I need from now on.
Sid Frami (verified owner) –
11-26-2020. The Milwaukee 4 inch hole dozer is a quality product and definitely gets the job done quickly.
Letha Von (verified owner) –
Odd size no one carries in the store. Works like it is supposed to. Too bad we couldn’t get it sooner, but it was delivered straight to my house.
Eveline Jacobs (verified owner) –
A little bit high in price but did the job
Yvonne Hill (verified owner) –
WORKED PERFECT FOR WHAT I NEEDED
Paula Cremin (verified owner) –
The Hole Dozer makes a very clean and precise hole, at least in wood. The arbor holes are compatible with the Milwaukee Hole Hawg as well so you can use the arbors from the Hawg kit with the Hole Dozer. When cutting through wood, be careful not to put too much pressure on one side as the saw can grab and stall or spin the wood stock around. The round wood cutting can be easily removed from the saw but there are access ports on the side in case you need to pry it out.
Adell Considine (verified owner) –
It is working very well. I think I will in time be replacing all the hole dozers I have that are not with the carbide. They seem to make a smoother cut.
Joany Maggio (verified owner) –
Hands down the best holesaw out there. I have been using this for a month now and have lost count on the number of holes I have drilled. It’s great for those holes through 2×6 wood plates and when you encounter a nail or screw, it’ll cut right through it. I have used other leading brands and have been disappointed with them while this one has not dulled yet and cuts awesome clean holes. For the price, you certainly get what you pay for.
Rory Huel (verified owner) –
These hole saw bits do a nice job. I drilled 10 consecutive holes in a row on a 1X6 board for a project that I was doing building a fishing rod holder. I can honestly say that the last hole I drilled was no more difficult than the first one. I drilled these holes with my battery operated drill. There were no issues drilling the holes other than the they did generate some heat, which is to be expected, but did not affect the performance. I’d recommend using these bits and they would particularly work well drilling through sheetrock or less dense materials.
Houston Balistreri (verified owner) –
I’ve used Milwaukee products for many years and all their tools are top-notch. The Hole Dozer hole saws are no exception…work great.
Nicolette Fritsch (verified owner) –
Did the job. I had a bit of trouble setting the torque correctly.
Eddie Stokes (verified owner) –
this hole saw cut right thru the steel that I needed a hole in.
Dudley O’Hara (verified owner) –
These hole saw bits do a nice job. I drilled 10 consecutive holes in a row on a 1X6 board for a project that I was doing building a fishing rod holder. I can honestly say that the last hole I drilled was no more difficult than the first one. I drilled these holes with my battery operated drill. There were no issues drilling the holes other than the they did generate some heat, which is to be expected, but did not affect the performance. I’d recommend using these bits and they would particularly work well drilling through sheetrock or less dense materials.
Brenna Mraz (verified owner) –
Quality and performance
Baron Weber (verified owner) –
Great product
Sister Cronin (verified owner) –
The Milwaukee dozer hole saws are fantastic. My wife got me the set of smaller diameters for Christmas a few years ago but I’ve been slowly adding the larger sizes over time. This 5 inch saw fits the “big” chuck that comes in the sets. I’ve been making some oval workbench cutouts and this size is perfect for the end radius. They are bimetal but to be honest I’ve only ever used them on wood so your mileage may vary if you hit a nail or something. I wish they were a little cheaper for what they are… but like the old saying, you get what you pay for and these are the best I’ve used.
Clemens Thiel (verified owner) –
The 5 inch carbide hole dozer saw arrived very quickly and secured in its own blister pak, inside a carton with bubble wrap. All intact. I selected it because of the mfg’ers reputation for top quality products and tools. I like the ease of securing it to the drill bit. The specific feature is the toughness of the saw and teeth. I use it on different materials and it cuts thru easily. Make sure you have the optional handle attached to your drill in case the saw snags so that you don’t wrench your wrist. The quality is superb! Easy to use. It’s working out and cutting holes as planned and expected. I like it and would order another.
Lupe Kerluke (verified owner) –
I had previously purchased one of these hole saws for my husband and after using it, he asked me to order a few more in different sizes.He says that they are great. They are tough, easy to set up and to remove. He has used plenty in the past that would get 3-4 uses and then dull so badly that they had to be tossed out.These seem to have much greater durability.
Estel Kulas (verified owner) –
As expected, high quality, well made. A great addition to my Milwaukee set.