The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 1-3/8 in. HOLE DOZER with carbide teeth
Alex Kilback (verified owner) –
Perfect for the job I have to do.
Thomas Parisian (verified owner) –
I use these hole saws all the time – I wish they didn’t cost so much. These saws are a mush for getting through the plate on a house and generally work very well. Carbide is ok I guess – I still haven’t had much luck with them if you hit into a nail or other metal object. They don’t seem to hold up as good as a carbide saw blade does. Still, a must have if your running pipes through the wall.
Kevin Keeling (verified owner) –
I used this with a BuildPro pipe coping tool. I used it on 1.5″ Stainless Steel Sch 40 pipe (1.9″ OD) and it worked awesome. I did use Tapmatic Edge lube, and let the hole saw do the cutting. I must have coped 50 pipes or more, without any issue. I did snap off one carbide tooth, but the it didn’t stop work. On such a hard material as 316 Stainless Steel, this was a small price to pay for so much work.
Jarod Corwin (verified owner) –
Using this to build a large Connect Four for our youth at church. Fairly clean holes in mdf.
Jayde Jaskolski (verified owner) –
I got this hole dozer saw to make compact speaker enclosures. I finally received the correct arbor and I was surprised at just how well this saw works. My future plan is to buy an unfinished shed – and convert it into a nice cabin and I’m sure this carbide saw will make it much easier when installing a nice wood burning stove and the opening for a washer/dryer vent. I highly recommend this Milwaukee dozer saw to anyone who has a need.
Wallace Conn (verified owner) –
Odd size no one carries in the store. Works like it is supposed to. Too bad we couldn’t get it sooner, but it was delivered straight to my house.
Carmine Funk (verified owner) –
I have used Milwaukee hole saws for so many things its hard to keep track. I like this hole saw particularly because it is much closer to a 2″ hole than a 2″ hole saw. Hole saws are very crude ways of cutting a hole and are never the exact size you need. This being just under 2″ makes fitting for a perfect 2″ hole so much easier. These are a great option when needing to cut holes. I have many of this brand that have cut many holes, they just keep going.
Lesley Windler (verified owner) –
this hole saw cut right thru the steel that I needed a hole in.
Jada Cummerata (verified owner) –
When your drilling a hole this big you want a hole bit that isnt going to bind up and I want one that is deep enough to cut a 2x without a problem. I am happy with the sharpness and the ease of cutting without it heating up and burning the wood. The chunk of wood is relatively easy to remove also. Be careful not to cut your hand loading it into your driver because this sucker is sharp. I like it a lot. Thanks!
Fermin Beahan (verified owner) –
WORKED PERFECT FOR WHAT I NEEDED
Harmony Davis (verified owner) –
Great product
Odie Howe (verified owner) –
Hole Saw 5 inchThis is a sturdy and sharp circular hole saw that cuts a 5 inch hole. Mandril not included, but screwed on perfectly to a mandrel I already have. Carbide teeth should make it last a long time. It is deep enough (cutting depth over 1.6 inches). It has adequate slots around the side to make plug removal easy enough. I’m pretty happy with this 5 inch hole saw.
Alfreda Collier (verified owner) –
The Milwaukee dozer hole saws are fantastic. My wife got me the set of smaller diameters for Christmas a few years ago but I’ve been slowly adding the larger sizes over time. This 5 inch saw fits the “big” chuck that comes in the sets. I’ve been making some oval workbench cutouts and this size is perfect for the end radius. They are bimetal but to be honest I’ve only ever used them on wood so your mileage may vary if you hit a nail or something. I wish they were a little cheaper for what they are… but like the old saying, you get what you pay for and these are the best I’ve used.
Zelma Hoppe (verified owner) –
It cleanly cut two holes in 3/16 steel bumper so I could flush mount some LED lights.
Adrain Schulist (verified owner) –
I’ve used various sizes of these Milwaukee hole saws. They’ve lasted many years and perform beautifully. This particular part does not include the arbor, which is required. One arbor will fit many size hole saws, and I already have an arbor that fits this saw. After attaching the arbor to the hole saw, insert the assembly into your drill. It cuts a clean and smooth hole in wood every time.
Ansel Kreiger (verified owner) –
I needed to put a faucet hole in a new countertop, but we did not want to have the factory do it because we wanted to have the vessel sink and faucet sitting on the vanity top in our bathroom to decide on where the faucet would be. I used the drilll bit on the chuck to mark the spot for the faucet and we took the top off and cut the hole from the underside. It worked beautifully!
Nasir Rogahn (verified owner) –
Milwaukee makes excellent hole saws. If you need a 5″ hole saw for whatever application, this is what you need. Carbide teeth last a lot longer than bimetal teeth in most materials, especially when encountering metal, and is perfect to use in any wood or plastic application. Masonry, continuous use in metal, and similar materials you might want to consider a different saw. Fits standard hole saw arbors. Five stars for build quality and made in the USA.
Vivian Brekke (verified owner) –
The best thing about this hole saw is that it can be used on multiple materials without a problem. So far it has performed really well on stainless steel sheets and wood. The cuts are clean and smooth, but I do recommend safety glasses as the dust, etc. does spray fast. We have used it for about a month on different projects and there is no wear on the teeth (really sharp). This should be the last one of these I have to buy!