Milwaukee 1-1/2 in. Hole Dozer Carbide Hole Saw
$15.47
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 1-1/2 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .17 lbs |
|---|---|
| Dimensions | 1.75 × 2.94 × 3.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 2.2 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 1-1/2" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 3/8 In. |
| Model | 49-56-0713 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 1-1/2 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# 48-20-8856
Drill Bits
Model# DW2535
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# 49-56-0247
Drill Bits
Model# DW2045 G
Drill Bits
Model# 48-20-8852
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Rashad Koch (verified owner) –
I already have 5 other individual hole saw sizes and the 13 piece hole saw kit (251885) from Milwaukee, this is why I keep purchasing new individual ones as I need them. The quick change hole saw arbor, 233438, with pilot drill bit is a must, it makes hole saw bit changing so much easier and faster. I primary use them to drill through wood but sometimes I’ve hit nails, this is why I only use these Milwaukee saws. I highly recommend them.
Treva Wiegand (verified owner) –
I’ve used Milwaukee products for many years and all their tools are top-notch. The Hole Dozer hole saws are no exception…work great.
Wallace Hill (verified owner) –
Great quality monster hole saw. Drilled smooth through some plywood for some exhaust vents for a roof job. It looks huge on a my drill. The carbide teeth definitely just chew through wood like a hot knife through butter. Of course I had to be careful because the larger a drill bit is, the more risky it is in a bind up. It did not bind up on me at all but still used it with caution. I really like Milwaukee’s pilot bit which I got separate because it has to knobs that secure into the large bit along with the threaded insert. I didn’t have any problem removing the wood from the bit after the cut out which I really liked. I only used it on wood but this hole saw is a beast. Definitely use a decently powered drill. It’s still really sharp and ready for more and even the paint itself held up which is pretty funny. Definitely recommend this line up Milwaukee hole saws because that carbide definitely makes a difference.
Merlin Legros (verified owner) –
These hole saw bits do a nice job. I drilled 10 consecutive holes in a row on a 1X6 board for a project that I was doing building a fishing rod holder. I can honestly say that the last hole I drilled was no more difficult than the first one. I drilled these holes with my battery operated drill. There were no issues drilling the holes other than the they did generate some heat, which is to be expected, but did not affect the performance. I’d recommend using these bits and they would particularly work well drilling through sheetrock or less dense materials.
Maida Moen (verified owner) –
I used this with a BuildPro pipe coping tool. I used it on 1.5″ Stainless Steel Sch 40 pipe (1.9″ OD) and it worked awesome. I did use Tapmatic Edge lube, and let the hole saw do the cutting. I must have coped 50 pipes or more, without any issue. I did snap off one carbide tooth, but the it didn’t stop work. On such a hard material as 316 Stainless Steel, this was a small price to pay for so much work.
Burley Thiel (verified owner) –
The hole saw worked better than expected. I used it to cut holes in cement board siding.
Gideon Herman (verified owner) –
Better then the old style.
Melody Powlowski (verified owner) –
I have been a builder remodeler for 49 years, and as such I have many opportunities to use a tool like this Milwaukee 5 IN. CARBIDE HOLE DOZER SAW. These carbide hole saws are of high quality, and they work very well for work requiring drilling work into more challenging materials that we drill into as we often do. Milwaukee tools are always of high quality as well, so these are a very good example of that.
Amara Murazik (verified owner) –
As expected, high quality, well made. A great addition to my Milwaukee set.
Karley Renner (verified owner) –
Precision cuts. The quality is top notch.
Mekhi Konopelski (verified owner) –
works excellent on fiberglass pools cutting holes for return jets.
Clement Waters (verified owner) –
The 5 inch carbide hole dozer saw arrived very quickly and secured in its own blister pak, inside a carton with bubble wrap. All intact. I selected it because of the mfg’ers reputation for top quality products and tools. I like the ease of securing it to the drill bit. The specific feature is the toughness of the saw and teeth. I use it on different materials and it cuts thru easily. Make sure you have the optional handle attached to your drill in case the saw snags so that you don’t wrench your wrist. The quality is superb! Easy to use. It’s working out and cutting holes as planned and expected. I like it and would order another.
Edwin Zemlak (verified owner) –
When your drilling a hole this big you want a hole bit that isnt going to bind up and I want one that is deep enough to cut a 2x without a problem. I am happy with the sharpness and the ease of cutting without it heating up and burning the wood. The chunk of wood is relatively easy to remove also. Be careful not to cut your hand loading it into your driver because this sucker is sharp. I like it a lot. Thanks!
Salvador Lowe (verified owner) –
Great product
Jana Hudson (verified owner) –
I used the hole saw to cut a faucet hole in a stainless steel sink. It cut clean and fast.
Arden Heaney (verified owner) –
The Hole Dozer makes a very clean and precise hole, at least in wood. The arbor holes are compatible with the Milwaukee Hole Hawg as well so you can use the arbors from the Hawg kit with the Hole Dozer. When cutting through wood, be careful not to put too much pressure on one side as the saw can grab and stall or spin the wood stock around. The round wood cutting can be easily removed from the saw but there are access ports on the side in case you need to pry it out.
Joana Tromp (verified owner) –
the product worked just as expected. no issues at all.
Juanita Gorczany (verified owner) –
Did an excellent job cutting through thick stainless steel.