Milwaukee 1-3/4 in. Hole Dozer Carbide Hole Saw
$17.28
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 1-3/4 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .18 lbs |
|---|---|
| Dimensions | 2.00 × 2.94 × 3.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 1-3/4" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 3/8 In. |
| Model | 49-56-0717 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 1-3/4 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2535
Drill Bits
Model# DW2046 G
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# 48-32-2100
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# FB-007
Drill Bits
Model# 48-25-2252
Drill Bits
Model# 282269
Nicklaus Feil (verified owner) –
Using this to build a large Connect Four for our youth at church. Fairly clean holes in mdf.
Dudley Leuschke (verified owner) –
I got this hole dozer saw to make compact speaker enclosures. I finally received the correct arbor and I was surprised at just how well this saw works. My future plan is to buy an unfinished shed – and convert it into a nice cabin and I’m sure this carbide saw will make it much easier when installing a nice wood burning stove and the opening for a washer/dryer vent. I highly recommend this Milwaukee dozer saw to anyone who has a need.
Brisa Kessler (verified owner) –
This one hole saw cost me half as much as a complete set of 10 dozer saws, which sadly did not contain this specific size
Luis Harvey (verified owner) –
Just right
Guido Dach (verified owner) –
Great product
Ayana Crist (verified owner) –
I needed to put a faucet hole in a new countertop, but we did not want to have the factory do it because we wanted to have the vessel sink and faucet sitting on the vanity top in our bathroom to decide on where the faucet would be. I used the drilll bit on the chuck to mark the spot for the faucet and we took the top off and cut the hole from the underside. It worked beautifully!
Alyce Schmeler (verified owner) –
Hole Saw 5 inchThis is a sturdy and sharp circular hole saw that cuts a 5 inch hole. Mandril not included, but screwed on perfectly to a mandrel I already have. Carbide teeth should make it last a long time. It is deep enough (cutting depth over 1.6 inches). It has adequate slots around the side to make plug removal easy enough. I’m pretty happy with this 5 inch hole saw.
Annette Ebert (verified owner) –
Perfect for the job I have to do.
Vesta Smitham (verified owner) –
Easy to assemble. Fast cutting. Works great.
Hailee Gibson (verified owner) –
this hole saw cut right thru the steel that I needed a hole in.
Martine Shanahan (verified owner) –
I replace a hole saw with the hole saw with Carbide teeth. It works great!. I just hope it lasts for a long time. I will be attempting to replace the hole saws I have with ones that are carbide teeth as I need from now on.
Odell Labadie (verified owner) –
The Hole Dozer makes a very clean and precise hole, at least in wood. The arbor holes are compatible with the Milwaukee Hole Hawg as well so you can use the arbors from the Hawg kit with the Hole Dozer. When cutting through wood, be careful not to put too much pressure on one side as the saw can grab and stall or spin the wood stock around. The round wood cutting can be easily removed from the saw but there are access ports on the side in case you need to pry it out.
Monroe Bogan (verified owner) –
Took awhile but eventually cut a hole through my masonry wall. Comparing with a different hole saw I have, the teeth on this one are too smooth. I think they should be more jagged to catch and grind against the masonry.
Jaida Oberbrunner (verified owner) –
Better then the old style.
Dana Schneider (verified owner) –
I had previously purchased one of these hole saws for my husband and after using it, he asked me to order a few more in different sizes.He says that they are great. They are tough, easy to set up and to remove. He has used plenty in the past that would get 3-4 uses and then dull so badly that they had to be tossed out.These seem to have much greater durability.
Davion Carter (verified owner) –
This is a quality product which performed perfectly. I would recommend this product.
Cleora Bode (verified owner) –
I’ve used various sizes of these Milwaukee hole saws. They’ve lasted many years and perform beautifully. This particular part does not include the arbor, which is required. One arbor will fit many size hole saws, and I already have an arbor that fits this saw. After attaching the arbor to the hole saw, insert the assembly into your drill. It cuts a clean and smooth hole in wood every time.
Zack Eichmann (verified owner) –
The four and a half inch hole Dozer says it all. This hole saw cuts through would like a hot knife through butter, and does the same thing going through metal. The wholesale will last a long time if used properly and kept lubricated while cutting in metal. When using a hole saw like this it is recommended to wear safety glasses and have proper safety equipment and training before using it.
Joanny Prosacco (verified owner) –
This is a beast of a hole saw. You need something strong when cutting a hole that big and this hole saw fits the bill. Make sure you have a powerful, relatively slow turning drill. The hole saw fits both of my mandrels perfectly and locks in tightly. The carbide tips are sharp and cut quickly through metal or wood. Obviously drywall is not problem The slots on the side make removal of the slug or coupon easier. This was a great addition to my shop.
Maybell Kiehn (verified owner) –
The 5 inch carbide hole dozer saw arrived very quickly and secured in its own blister pak, inside a carton with bubble wrap. All intact. I selected it because of the mfg’ers reputation for top quality products and tools. I like the ease of securing it to the drill bit. The specific feature is the toughness of the saw and teeth. I use it on different materials and it cuts thru easily. Make sure you have the optional handle attached to your drill in case the saw snags so that you don’t wrench your wrist. The quality is superb! Easy to use. It’s working out and cutting holes as planned and expected. I like it and would order another.