Milwaukee 1-7/8 in. Hole Dozer Carbide Hole Saw
$16.99
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 1-7/8 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .19 lbs |
|---|---|
| Dimensions | 2.05 × 2.94 × 3.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 1-7/8" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 3/8 In. |
| Model | 49-56-0719 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 1-7/8 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 282269
Drill Bits
Model# FB-005
Drill Bits
Model# 48-20-8852
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# DW2043 Z
Drill Bits
Model# DW2735P
Drill Bits
Model# DW2535
Faustino Berge (verified owner) –
Perfect for the job I have to do.
Milton Wolff (verified owner) –
Like hot knife thru butter
Lila Stroman (verified owner) –
Carbide teeth hole saw is worth buying, this will lasts 100 times longer then conventional bi-metal saw. I would definitely recommend to buy it, especially if you need to use it on the cement board, stacco surfaces. I had compared Milwaukee Carbide saw with Lenox and found the Milwaukee is a win win
Verdie Jerde (verified owner) –
works excellent on fiberglass pools cutting holes for return jets.
Meghan Murphy (verified owner) –
Worked great for cutting light box in plaster ceiling.
Alex Rau (verified owner) –
The best thing about this hole saw is that it can be used on multiple materials without a problem. So far it has performed really well on stainless steel sheets and wood. The cuts are clean and smooth, but I do recommend safety glasses as the dust, etc. does spray fast. We have used it for about a month on different projects and there is no wear on the teeth (really sharp). This should be the last one of these I have to buy!
Cielo Trantow (verified owner) –
This one hole saw cost me half as much as a complete set of 10 dozer saws, which sadly did not contain this specific size
Bailee Hermiston (verified owner) –
I replace a hole saw with the hole saw with Carbide teeth. It works great!. I just hope it lasts for a long time. I will be attempting to replace the hole saws I have with ones that are carbide teeth as I need from now on.
Julio Wiegand (verified owner) –
Great hole saw! Cuts through wood like butter! Just make sure to get the center drill with the prongs, with a hole saw this big, it will spin right off of a typical threaded center bit without the prongs to keep it from spinning on the threads. It fit my smaller hole saw center bit, but it unthreaded as soon as I stopped. This wasn’t a problem once I got the correct center bit with the prongs!
Nikko Osinski (verified owner) –
Did an excellent job
Matt Altenwerth (verified owner) –
This is a beast of a hole saw. You need something strong when cutting a hole that big and this hole saw fits the bill. Make sure you have a powerful, relatively slow turning drill. The hole saw fits both of my mandrels perfectly and locks in tightly. The carbide tips are sharp and cut quickly through metal or wood. Obviously drywall is not problem The slots on the side make removal of the slug or coupon easier. This was a great addition to my shop.
Larry Schoen (verified owner) –
Works great. Was a replacement as my previous hole saw wore out
Destiny Rowe (verified owner) –
I needed to put a faucet hole in a new countertop, but we did not want to have the factory do it because we wanted to have the vessel sink and faucet sitting on the vanity top in our bathroom to decide on where the faucet would be. I used the drilll bit on the chuck to mark the spot for the faucet and we took the top off and cut the hole from the underside. It worked beautifully!
Ronny Bergstrom (verified owner) –
It cleanly cut two holes in 3/16 steel bumper so I could flush mount some LED lights.
Dortha Yundt (verified owner) –
I had previously purchased one of these hole saws for my husband and after using it, he asked me to order a few more in different sizes.He says that they are great. They are tough, easy to set up and to remove. He has used plenty in the past that would get 3-4 uses and then dull so badly that they had to be tossed out.These seem to have much greater durability.
Tevin Oberbrunner (verified owner) –
Drilled through the backer board and plywood in an instance!
Elza O’Reilly (verified owner) –
this hole saw cut right thru the steel that I needed a hole in.
Jeramie Durgan (verified owner) –
The 5 inch carbide hole dozer saw arrived very quickly and secured in its own blister pak, inside a carton with bubble wrap. All intact. I selected it because of the mfg’ers reputation for top quality products and tools. I like the ease of securing it to the drill bit. The specific feature is the toughness of the saw and teeth. I use it on different materials and it cuts thru easily. Make sure you have the optional handle attached to your drill in case the saw snags so that you don’t wrench your wrist. The quality is superb! Easy to use. It’s working out and cutting holes as planned and expected. I like it and would order another.
Edythe O’Keefe (verified owner) –
Breezed through 18ga gauge steel like butter.
Lucio Gutmann (verified owner) –
the best