Milwaukee 1-7/8 in. Hole Dozer Carbide Hole Saw
$16.99
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 1-7/8 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .19 lbs |
|---|---|
| Dimensions | 2.05 × 2.94 × 3.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 1-7/8" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 3/8 In. |
| Model | 49-56-0719 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 1-7/8 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2043 Z
Drill Bits
Model# 48-25-2252
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# 48-32-2100
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Drill Bits
Model# DW2162
Drill Bits
Model# 49-56-0247
Drill Bits
Model# DW2542
Roel Beier (verified owner) –
Great product
Kennedi Douglas (verified owner) –
Did an excellent job cutting through thick stainless steel.
Destin Stehr (verified owner) –
I already have 5 other individual hole saw sizes and the 13 piece hole saw kit (251885) from Milwaukee, this is why I keep purchasing new individual ones as I need them. The quick change hole saw arbor, 233438, with pilot drill bit is a must, it makes hole saw bit changing so much easier and faster. I primary use them to drill through wood but sometimes I’ve hit nails, this is why I only use these Milwaukee saws. I highly recommend them.
Marisol Braun (verified owner) –
Just right
Mitchell Altenwerth (verified owner) –
I use these hole saws all the time – I wish they didn’t cost so much. These saws are a mush for getting through the plate on a house and generally work very well. Carbide is ok I guess – I still haven’t had much luck with them if you hit into a nail or other metal object. They don’t seem to hold up as good as a carbide saw blade does. Still, a must have if your running pipes through the wall.
Van Leuschke (verified owner) –
Great holesaw
Randi Hammes (verified owner) –
The Milwaukee 5-inch Carbide Hole Dozer Saw is an excellent hole saw, very durable, and long lasting. I have used various sizes of these hole saws by Milwaukee for years. They cut through wood, nails, stainless steel, shingles, and cement board. Unlike the “standard” hole saw that seems like a one-time-use, this hole saw will last for many uses. This product is only the saw blade and doesn’t include the 3/8 inch quick-change arbor. This arbor is included in kits or can be purchased separately. All of the Milwaukee Hole Saws, 1-1/4 inch and above, use the same arbor so you can just purchase the size saw you need for the job. The arbor screws into the back of the hole saw and then the sleeve slides into two holes in the back to keep the arbor from tightening into the saw and allows the arbor to be easily removed. The saw cuts a hole up to 1-3/4 inches deep. I recommend using a heavy-duty drill motor so that the torque doesn’t damage the motor, especially when using large saw sizes such as this. The pilot drill bit, that is part of the arbor, is slightly longer than the hole saw so that once the bit cuts through the material on the other side, you can remove the saw and continue drilling from the back side to eliminate tear-out.
Beaulah Runolfsdottir (verified owner) –
This is a quality product which performed perfectly. I would recommend this product.
Janelle Hackett (verified owner) –
Did the job. I had a bit of trouble setting the torque correctly.
Neoma O’Hara (verified owner) –
The four and a half inch hole Dozer says it all. This hole saw cuts through would like a hot knife through butter, and does the same thing going through metal. The wholesale will last a long time if used properly and kept lubricated while cutting in metal. When using a hole saw like this it is recommended to wear safety glasses and have proper safety equipment and training before using it.
Raul Maggio (verified owner) –
Ordered this cutter to replace a worn out one. Perfect fit cuts great.
Pearlie Haag (verified owner) –
I used this with a BuildPro pipe coping tool. I used it on 1.5″ Stainless Steel Sch 40 pipe (1.9″ OD) and it worked awesome. I did use Tapmatic Edge lube, and let the hole saw do the cutting. I must have coped 50 pipes or more, without any issue. I did snap off one carbide tooth, but the it didn’t stop work. On such a hard material as 316 Stainless Steel, this was a small price to pay for so much work.
Toney Pagac (verified owner) –
These hole saw bits do a nice job. I drilled 10 consecutive holes in a row on a 1X6 board for a project that I was doing building a fishing rod holder. I can honestly say that the last hole I drilled was no more difficult than the first one. I drilled these holes with my battery operated drill. There were no issues drilling the holes other than the they did generate some heat, which is to be expected, but did not affect the performance. I’d recommend using these bits and they would particularly work well drilling through sheetrock or less dense materials.
Alysson Erdman (verified owner) –
Took awhile but eventually cut a hole through my masonry wall. Comparing with a different hole saw I have, the teeth on this one are too smooth. I think they should be more jagged to catch and grind against the masonry.
Dallin Conroy (verified owner) –
Did the job cleanly
Andrew Leffler (verified owner) –
Dozer is putting it mildly. Milwaukee Hole Dozers do amazing things to all materials short of concrete. hard working and long life make them unbeatable.
Aditya Ortiz (verified owner) –
Quality and performance
Maymie Stroman (verified owner) –
Easy transaction
Maximilian Dare (verified owner) –
The Hole Dozer makes a very clean and precise hole, at least in wood. The arbor holes are compatible with the Milwaukee Hole Hawg as well so you can use the arbors from the Hawg kit with the Hole Dozer. When cutting through wood, be careful not to put too much pressure on one side as the saw can grab and stall or spin the wood stock around. The round wood cutting can be easily removed from the saw but there are access ports on the side in case you need to pry it out.
Melvina Paucek (verified owner) –
Cut 23 circular holes in metal 1/8 thick with no difficulty. Worked great