Milwaukee 2-5/8 in. Hole Dozer Carbide Hole Saw
$21.99
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 2-5/8 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .46 lbs |
|---|---|
| Dimensions | 2.25 × 3.88 × 4.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 2-5/8" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | N/A |
| Model | 49-56-0729 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 2-5/8 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# FB-003
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# FB-015
Drill Bits
Model# 282303
Drill Bits
Model# 49-56-0247
Drill Bits
Model# DW2535
Drill Bits
Model# 282269
Drill Bits
Model# DW2162
Al Grimes (verified owner) –
Cuts like crazy. Better to run slow & hang on to start.
Fredrick Howell (verified owner) –
I used this with a BuildPro pipe coping tool. I used it on 1.5″ Stainless Steel Sch 40 pipe (1.9″ OD) and it worked awesome. I did use Tapmatic Edge lube, and let the hole saw do the cutting. I must have coped 50 pipes or more, without any issue. I did snap off one carbide tooth, but the it didn’t stop work. On such a hard material as 316 Stainless Steel, this was a small price to pay for so much work.
Bailey Kris (verified owner) –
Did an excellent job cutting through thick stainless steel.
Paolo Shanahan (verified owner) –
I got this hole dozer saw to make compact speaker enclosures. I finally received the correct arbor and I was surprised at just how well this saw works. My future plan is to buy an unfinished shed – and convert it into a nice cabin and I’m sure this carbide saw will make it much easier when installing a nice wood burning stove and the opening for a washer/dryer vent. I highly recommend this Milwaukee dozer saw to anyone who has a need.
Jillian Crist (verified owner) –
Great product
Shanelle Flatley (verified owner) –
Hole Saw 5 inchThis is a sturdy and sharp circular hole saw that cuts a 5 inch hole. Mandril not included, but screwed on perfectly to a mandrel I already have. Carbide teeth should make it last a long time. It is deep enough (cutting depth over 1.6 inches). It has adequate slots around the side to make plug removal easy enough. I’m pretty happy with this 5 inch hole saw.
Lucie Cremin (verified owner) –
A little bit high in price but did the job
Letha Muller (verified owner) –
Dozer is putting it mildly. Milwaukee Hole Dozers do amazing things to all materials short of concrete. hard working and long life make them unbeatable.
Rebeka Towne (verified owner) –
Quality and performance
Sheldon Kihn (verified owner) –
Perfect for the job I have to do.
Ollie Abernathy (verified owner) –
Easy transaction
Adolfo Muller (verified owner) –
Great holesaw
Matilda Hand (verified owner) –
I’ve used various sizes of these Milwaukee hole saws. They’ve lasted many years and perform beautifully. This particular part does not include the arbor, which is required. One arbor will fit many size hole saws, and I already have an arbor that fits this saw. After attaching the arbor to the hole saw, insert the assembly into your drill. It cuts a clean and smooth hole in wood every time.
Jadon Berge (verified owner) –
The Milwaukee dozer hole saws are fantastic. My wife got me the set of smaller diameters for Christmas a few years ago but I’ve been slowly adding the larger sizes over time. This 5 inch saw fits the “big” chuck that comes in the sets. I’ve been making some oval workbench cutouts and this size is perfect for the end radius. They are bimetal but to be honest I’ve only ever used them on wood so your mileage may vary if you hit a nail or something. I wish they were a little cheaper for what they are… but like the old saying, you get what you pay for and these are the best I’ve used.
Britney Hegmann (verified owner) –
It is working very well. I think I will in time be replacing all the hole dozers I have that are not with the carbide. They seem to make a smoother cut.
Adonis Kuhic (verified owner) –
Cut 23 circular holes in metal 1/8 thick with no difficulty. Worked great
Cornell Farrell (verified owner) –
I used the hole saw to cut a faucet hole in a stainless steel sink. It cut clean and fast.
Connie Bergnaum (verified owner) –
Precision cuts. The quality is top notch.
Tiara Gibson (verified owner) –
11-26-2020. The Milwaukee 4 inch hole dozer is a quality product and definitely gets the job done quickly.
Darius Blanda (verified owner) –
Took awhile but eventually cut a hole through my masonry wall. Comparing with a different hole saw I have, the teeth on this one are too smooth. I think they should be more jagged to catch and grind against the masonry.