Milwaukee 3 in. Hole Dozer Carbide Hole Saw
$23.91
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 3 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .55 lbs |
|---|---|
| Dimensions | 2.25 × 3.88 × 5.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 3" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-0734 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 3 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# FB-003
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# DW2046 G
Drill Bits
Model# 48-25-2252
Drill Bits
Model# DW2043 Z
Drill Bits
Model# 48-32-2100
Vicenta Crist (verified owner) –
The Hole Dozer makes a very clean and precise hole, at least in wood. The arbor holes are compatible with the Milwaukee Hole Hawg as well so you can use the arbors from the Hawg kit with the Hole Dozer. When cutting through wood, be careful not to put too much pressure on one side as the saw can grab and stall or spin the wood stock around. The round wood cutting can be easily removed from the saw but there are access ports on the side in case you need to pry it out.
Kenya Cremin (verified owner) –
A little bit high in price but did the job
Jett Hudson (verified owner) –
11-26-2020. The Milwaukee 4 inch hole dozer is a quality product and definitely gets the job done quickly.
Helena Ondricka (verified owner) –
Just right
Reed Hauck (verified owner) –
the best
Major Gorczany (verified owner) –
Sometimes you have a need to cut holes through different materials to accomplish a task. I bought one of those portable a/c units, it comes with different options to vent it outside one is through the window and the other is through the wall. I have solar screens on my windows and the air flow was very restricted so I needed to vent through the wall this is where the Hole saw came to the rescue it made the job easy so I recommend this tool highly.
Jakayla Larkin (verified owner) –
Did the job cleanly
Clarabelle Brown (verified owner) –
The hole saw worked better than expected. I used it to cut holes in cement board siding.
Carolina Kemmer (verified owner) –
This is a quality product which performed perfectly. I would recommend this product.
Monte Schuppe (verified owner) –
This one hole saw cost me half as much as a complete set of 10 dozer saws, which sadly did not contain this specific size
Juwan Bruen (verified owner) –
I have been a builder remodeler for 49 years, and as such I have many opportunities to use a tool like this Milwaukee 5 IN. CARBIDE HOLE DOZER SAW. These carbide hole saws are of high quality, and they work very well for work requiring drilling work into more challenging materials that we drill into as we often do. Milwaukee tools are always of high quality as well, so these are a very good example of that.
Esther Jaskolski (verified owner) –
These hole saw bits do a nice job. I drilled 10 consecutive holes in a row on a 1X6 board for a project that I was doing building a fishing rod holder. I can honestly say that the last hole I drilled was no more difficult than the first one. I drilled these holes with my battery operated drill. There were no issues drilling the holes other than the they did generate some heat, which is to be expected, but did not affect the performance. I’d recommend using these bits and they would particularly work well drilling through sheetrock or less dense materials.
Freda Okuneva (verified owner) –
Cut through stucco line butter. Perfect for cutting in new electric boxes.
Sophia Huel (verified owner) –
Did an excellent job
Eli Graham (verified owner) –
Quality and performance
Dexter Herzog (verified owner) –
I have used Milwaukee hole saws for so many things its hard to keep track. I like this hole saw particularly because it is much closer to a 2″ hole than a 2″ hole saw. Hole saws are very crude ways of cutting a hole and are never the exact size you need. This being just under 2″ makes fitting for a perfect 2″ hole so much easier. These are a great option when needing to cut holes. I have many of this brand that have cut many holes, they just keep going.
Avis Trantow (verified owner) –
Like hot knife thru butter
Braulio Hahn (verified owner) –
Milwaukee makes excellent hole saws. If you need a 5″ hole saw for whatever application, this is what you need. Carbide teeth last a lot longer than bimetal teeth in most materials, especially when encountering metal, and is perfect to use in any wood or plastic application. Masonry, continuous use in metal, and similar materials you might want to consider a different saw. Fits standard hole saw arbors. Five stars for build quality and made in the USA.
Camren Bechtelar (verified owner) –
Easy to assemble. Fast cutting. Works great.
Pete Mueller (verified owner) –
Great product