Milwaukee 3 in. Hole Dozer Carbide Hole Saw
$23.91
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 3 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .55 lbs |
|---|---|
| Dimensions | 2.25 × 3.88 × 5.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 3" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-0734 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 3 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-25-2252
Drill Bits
Model# DW2045 G
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# 48-20-8852
Drill Bits
Model# 48-25-2122
Drill Bits
Model# 48-32-2100
Drill Bits
Model# 48-28-1010
Drill Bits
Model# DW2542
Elinor Bechtelar (verified owner) –
Did the job. I had a bit of trouble setting the torque correctly.
Michelle Dooley (verified owner) –
WORKED PERFECT FOR WHAT I NEEDED
Maximillia Hand (verified owner) –
Very good
Dion Durgan (verified owner) –
It is working very well. I think I will in time be replacing all the hole dozers I have that are not with the carbide. They seem to make a smoother cut.
Ebony Stroman (verified owner) –
Easy transaction
Paige White (verified owner) –
Average rating is due to the slight oval shape and sloppy weld of the material. This caused the saw to cut a larger than stated size hole.
Marlee Veum (verified owner) –
Perfect for the job I have to do.
Sanford Skiles (verified owner) –
The four and a half inch hole Dozer says it all. This hole saw cuts through would like a hot knife through butter, and does the same thing going through metal. The wholesale will last a long time if used properly and kept lubricated while cutting in metal. When using a hole saw like this it is recommended to wear safety glasses and have proper safety equipment and training before using it.
Elena Kerluke (verified owner) –
The best thing about this hole saw is that it can be used on multiple materials without a problem. So far it has performed really well on stainless steel sheets and wood. The cuts are clean and smooth, but I do recommend safety glasses as the dust, etc. does spray fast. We have used it for about a month on different projects and there is no wear on the teeth (really sharp). This should be the last one of these I have to buy!
Ramiro Willms (verified owner) –
I used the saw with an arbor that I already had to cut a shower drain hole through 1/4″ Hardieboard plus 3/4″ plywood sub-floor. The carbide saw went through both layers relatively easy when compared to a bi-metal saw that just skimmed the surface. The Oatey drain fit perfectly in the 4-1/2″ hole. Home Depot had the best price and shipping was free and quick.
Daryl Barton (verified owner) –
I got this hole dozer saw to make compact speaker enclosures. I finally received the correct arbor and I was surprised at just how well this saw works. My future plan is to buy an unfinished shed – and convert it into a nice cabin and I’m sure this carbide saw will make it much easier when installing a nice wood burning stove and the opening for a washer/dryer vent. I highly recommend this Milwaukee dozer saw to anyone who has a need.
Georgette Bins (verified owner) –
I’ve used Milwaukee products for many years and all their tools are top-notch. The Hole Dozer hole saws are no exception…work great.
Ines Tremblay (verified owner) –
The Milwaukee dozer hole saws are fantastic. My wife got me the set of smaller diameters for Christmas a few years ago but I’ve been slowly adding the larger sizes over time. This 5 inch saw fits the “big” chuck that comes in the sets. I’ve been making some oval workbench cutouts and this size is perfect for the end radius. They are bimetal but to be honest I’ve only ever used them on wood so your mileage may vary if you hit a nail or something. I wish they were a little cheaper for what they are… but like the old saying, you get what you pay for and these are the best I’ve used.
Travon Greenfelder (verified owner) –
I use these hole saws all the time – I wish they didn’t cost so much. These saws are a mush for getting through the plate on a house and generally work very well. Carbide is ok I guess – I still haven’t had much luck with them if you hit into a nail or other metal object. They don’t seem to hold up as good as a carbide saw blade does. Still, a must have if your running pipes through the wall.
Hiram Emmerich (verified owner) –
The 5 inch carbide hole dozer saw arrived very quickly and secured in its own blister pak, inside a carton with bubble wrap. All intact. I selected it because of the mfg’ers reputation for top quality products and tools. I like the ease of securing it to the drill bit. The specific feature is the toughness of the saw and teeth. I use it on different materials and it cuts thru easily. Make sure you have the optional handle attached to your drill in case the saw snags so that you don’t wrench your wrist. The quality is superb! Easy to use. It’s working out and cutting holes as planned and expected. I like it and would order another.
Dandre Donnelly (verified owner) –
Cuts like crazy. Better to run slow & hang on to start.
Chadd Aufderhar (verified owner) –
Great hole saw! Cuts through wood like butter! Just make sure to get the center drill with the prongs, with a hole saw this big, it will spin right off of a typical threaded center bit without the prongs to keep it from spinning on the threads. It fit my smaller hole saw center bit, but it unthreaded as soon as I stopped. This wasn’t a problem once I got the correct center bit with the prongs!
Clark Mills (verified owner) –
the product worked just as expected. no issues at all.
Claudine Okuneva (verified owner) –
Dozer is putting it mildly. Milwaukee Hole Dozers do amazing things to all materials short of concrete. hard working and long life make them unbeatable.
Audra Marvin (verified owner) –
Hole Saw 5 inchThis is a sturdy and sharp circular hole saw that cuts a 5 inch hole. Mandril not included, but screwed on perfectly to a mandrel I already have. Carbide teeth should make it last a long time. It is deep enough (cutting depth over 1.6 inches). It has adequate slots around the side to make plug removal easy enough. I’m pretty happy with this 5 inch hole saw.