Milwaukee 3-1/2 in. Hole Dozer Carbide Hole Saw
$35.99
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
Only 10 left in stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 3-1/2 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .74 lbs |
|---|---|
| Dimensions | 2.25 × 4.88 × 5.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 3-1/2" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | N/A |
| Model | 49-56-0738 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 3-1/2 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# 48-20-8856
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# DW2046 G
Drill Bits
Model# 49-56-7010
Drill Bits
Model# DW2045 G
Drill Bits
Model# DW2535
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Elna Jakubowski (verified owner) –
Hole Saw 5 inchThis is a sturdy and sharp circular hole saw that cuts a 5 inch hole. Mandril not included, but screwed on perfectly to a mandrel I already have. Carbide teeth should make it last a long time. It is deep enough (cutting depth over 1.6 inches). It has adequate slots around the side to make plug removal easy enough. I’m pretty happy with this 5 inch hole saw.
Richard Altenwerth (verified owner) –
Drilled through the backer board and plywood in an instance!
Laurel Metz (verified owner) –
Breezed through 18ga gauge steel like butter.
Yasmin Ritchie (verified owner) –
Just right
Heath Flatley (verified owner) –
I had previously purchased one of these hole saws for my husband and after using it, he asked me to order a few more in different sizes.He says that they are great. They are tough, easy to set up and to remove. He has used plenty in the past that would get 3-4 uses and then dull so badly that they had to be tossed out.These seem to have much greater durability.
Jose Cronin (verified owner) –
Average rating is due to the slight oval shape and sloppy weld of the material. This caused the saw to cut a larger than stated size hole.
Neil Huels (verified owner) –
Easy to assemble. Fast cutting. Works great.
Shyanne Ortiz (verified owner) –
This is a quality product which performed perfectly. I would recommend this product.
Aida Cruickshank (verified owner) –
Very good
Jarrod Jacobs (verified owner) –
Cuts like crazy. Better to run slow & hang on to start.
Derek Lockman (verified owner) –
This is a beast of a hole saw. You need something strong when cutting a hole that big and this hole saw fits the bill. Make sure you have a powerful, relatively slow turning drill. The hole saw fits both of my mandrels perfectly and locks in tightly. The carbide tips are sharp and cut quickly through metal or wood. Obviously drywall is not problem The slots on the side make removal of the slug or coupon easier. This was a great addition to my shop.
Nash Goodwin (verified owner) –
Cut 23 circular holes in metal 1/8 thick with no difficulty. Worked great
Ben Cole (verified owner) –
Carbide helps cut through plastic very well!!
Marielle Kessler (verified owner) –
Did an excellent job cutting through thick stainless steel.
Darrion Lubowitz (verified owner) –
I use these hole saws all the time – I wish they didn’t cost so much. These saws are a mush for getting through the plate on a house and generally work very well. Carbide is ok I guess – I still haven’t had much luck with them if you hit into a nail or other metal object. They don’t seem to hold up as good as a carbide saw blade does. Still, a must have if your running pipes through the wall.
Dewayne Kuvalis (verified owner) –
the product worked just as expected. no issues at all.
Regan Dooley (verified owner) –
I got this hole dozer saw to make compact speaker enclosures. I finally received the correct arbor and I was surprised at just how well this saw works. My future plan is to buy an unfinished shed – and convert it into a nice cabin and I’m sure this carbide saw will make it much easier when installing a nice wood burning stove and the opening for a washer/dryer vent. I highly recommend this Milwaukee dozer saw to anyone who has a need.
Jeremy Kunde (verified owner) –
It is working very well. I think I will in time be replacing all the hole dozers I have that are not with the carbide. They seem to make a smoother cut.
Dejuan Beatty (verified owner) –
It dulls quickly
Eliseo Kunze (verified owner) –
WORKED PERFECT FOR WHAT I NEEDED