Milwaukee 3-5/8 in. Hole Dozer Carbide Hole Saw
$36.99
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 3-5/8 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .84 lbs |
|---|---|
| Dimensions | 2.25 × 4.88 × 5.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 3-5/8" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-0739 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 3-5/8 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2162
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# 48-20-8856
Drill Bits
Model# 48-25-2122
Drill Bits
Model# 48-20-8852
Drill Bits
Model# 49-56-0247
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# FB-003
Ryley Fadel (verified owner) –
I’ve used Milwaukee products for many years and all their tools are top-notch. The Hole Dozer hole saws are no exception…work great.
Coby Mayert (verified owner) –
does what Does what I need it to do.
Myrl Hintz (verified owner) –
this hole saw cut right thru the steel that I needed a hole in.
Henriette Grady (verified owner) –
It cleanly cut two holes in 3/16 steel bumper so I could flush mount some LED lights.
Marcel Pouros (verified owner) –
A little bit high in price but did the job
Queenie Hansen (verified owner) –
Worked great for cutting light box in plaster ceiling.
Rachel Smitham (verified owner) –
These hole saw bits do a nice job. I drilled 10 consecutive holes in a row on a 1X6 board for a project that I was doing building a fishing rod holder. I can honestly say that the last hole I drilled was no more difficult than the first one. I drilled these holes with my battery operated drill. There were no issues drilling the holes other than the they did generate some heat, which is to be expected, but did not affect the performance. I’d recommend using these bits and they would particularly work well drilling through sheetrock or less dense materials.
Erwin Runolfsdottir (verified owner) –
Great holesaw
Dorothy Doyle (verified owner) –
The four and a half inch hole Dozer says it all. This hole saw cuts through would like a hot knife through butter, and does the same thing going through metal. The wholesale will last a long time if used properly and kept lubricated while cutting in metal. When using a hole saw like this it is recommended to wear safety glasses and have proper safety equipment and training before using it.
Allison Herzog (verified owner) –
Hole Saw 5 inchThis is a sturdy and sharp circular hole saw that cuts a 5 inch hole. Mandril not included, but screwed on perfectly to a mandrel I already have. Carbide teeth should make it last a long time. It is deep enough (cutting depth over 1.6 inches). It has adequate slots around the side to make plug removal easy enough. I’m pretty happy with this 5 inch hole saw.
Eleonore Herzog (verified owner) –
Just right
Chasity Barrows (verified owner) –
Drilled through the backer board and plywood in an instance!
Xzavier Wintheiser (verified owner) –
I’ve used various sizes of these Milwaukee hole saws. They’ve lasted many years and perform beautifully. This particular part does not include the arbor, which is required. One arbor will fit many size hole saws, and I already have an arbor that fits this saw. After attaching the arbor to the hole saw, insert the assembly into your drill. It cuts a clean and smooth hole in wood every time.
Layla Bernhard (verified owner) –
The best thing about this hole saw is that it can be used on multiple materials without a problem. So far it has performed really well on stainless steel sheets and wood. The cuts are clean and smooth, but I do recommend safety glasses as the dust, etc. does spray fast. We have used it for about a month on different projects and there is no wear on the teeth (really sharp). This should be the last one of these I have to buy!
Andre Torp (verified owner) –
The Hole Dozer makes a very clean and precise hole, at least in wood. The arbor holes are compatible with the Milwaukee Hole Hawg as well so you can use the arbors from the Hawg kit with the Hole Dozer. When cutting through wood, be careful not to put too much pressure on one side as the saw can grab and stall or spin the wood stock around. The round wood cutting can be easily removed from the saw but there are access ports on the side in case you need to pry it out.
Bell Larkin (verified owner) –
Carbide helps cut through plastic very well!!
Maegan Murazik (verified owner) –
I replace a hole saw with the hole saw with Carbide teeth. It works great!. I just hope it lasts for a long time. I will be attempting to replace the hole saws I have with ones that are carbide teeth as I need from now on.
Maida Wolf (verified owner) –
I drilled 4, 7/8 inch holes through 1/4 steel. I used my drill press at 1000rpm, no lube, it drilled easily in about 20 seconds but the chatter and vibration from my drill press made it 1/16″ too big. I’m not 100% sure if it’s the bit or my press, but don’t make my mistake and test it in scrap first to test your hole.
Helga Feil (verified owner) –
I have used Milwaukee hole saws for so many things its hard to keep track. I like this hole saw particularly because it is much closer to a 2″ hole than a 2″ hole saw. Hole saws are very crude ways of cutting a hole and are never the exact size you need. This being just under 2″ makes fitting for a perfect 2″ hole so much easier. These are a great option when needing to cut holes. I have many of this brand that have cut many holes, they just keep going.
Damon Green (verified owner) –
This is a quality product which performed perfectly. I would recommend this product.