Milwaukee 4 in. Hole Dozer Carbide Hole Saw
$38.99
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 4 in. HOLE DOZER with carbide teeth
Additional information
| Weight | .9 lbs |
|---|---|
| Dimensions | 2.25 × 5.88 × 6.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 4" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-0742 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 4 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2162
Drill Bits
Model# FB-005
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# DW2043 Z
Drill Bits
Model# 48-25-2252
Drill Bits
Model# DW2735P
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Milwaukee Selfeed High-Speed Steel Wood Boring Bit Set (7-Piece)
Model# 49-22-0130
Romaine Kutch (verified owner) –
Average rating is due to the slight oval shape and sloppy weld of the material. This caused the saw to cut a larger than stated size hole.
Albina Ebert (verified owner) –
The Milwaukee dozer hole saws are fantastic. My wife got me the set of smaller diameters for Christmas a few years ago but I’ve been slowly adding the larger sizes over time. This 5 inch saw fits the “big” chuck that comes in the sets. I’ve been making some oval workbench cutouts and this size is perfect for the end radius. They are bimetal but to be honest I’ve only ever used them on wood so your mileage may vary if you hit a nail or something. I wish they were a little cheaper for what they are… but like the old saying, you get what you pay for and these are the best I’ve used.
Dan Glover (verified owner) –
It is working very well. I think I will in time be replacing all the hole dozers I have that are not with the carbide. They seem to make a smoother cut.
Judge Beatty (verified owner) –
Better then the old style.
Brett Eichmann (verified owner) –
Hands down the best holesaw out there. I have been using this for a month now and have lost count on the number of holes I have drilled. It’s great for those holes through 2×6 wood plates and when you encounter a nail or screw, it’ll cut right through it. I have used other leading brands and have been disappointed with them while this one has not dulled yet and cuts awesome clean holes. For the price, you certainly get what you pay for.
Lorenzo Wiegand (verified owner) –
It cleanly cut two holes in 3/16 steel bumper so I could flush mount some LED lights.
Xander Adams (verified owner) –
Cuts like crazy. Better to run slow & hang on to start.
Dorcas Torphy (verified owner) –
Took awhile but eventually cut a hole through my masonry wall. Comparing with a different hole saw I have, the teeth on this one are too smooth. I think they should be more jagged to catch and grind against the masonry.
Annabelle Rutherford (verified owner) –
Carbide helps cut through plastic very well!!
Opal Bernhard (verified owner) –
I had previously purchased one of these hole saws for my husband and after using it, he asked me to order a few more in different sizes.He says that they are great. They are tough, easy to set up and to remove. He has used plenty in the past that would get 3-4 uses and then dull so badly that they had to be tossed out.These seem to have much greater durability.
Ahmed Turner (verified owner) –
Easy transaction
Ernie Miller (verified owner) –
Milwaukee makes excellent hole saws. If you need a 5″ hole saw for whatever application, this is what you need. Carbide teeth last a lot longer than bimetal teeth in most materials, especially when encountering metal, and is perfect to use in any wood or plastic application. Masonry, continuous use in metal, and similar materials you might want to consider a different saw. Fits standard hole saw arbors. Five stars for build quality and made in the USA.
Dora Brown (verified owner) –
Sometimes you have a need to cut holes through different materials to accomplish a task. I bought one of those portable a/c units, it comes with different options to vent it outside one is through the window and the other is through the wall. I have solar screens on my windows and the air flow was very restricted so I needed to vent through the wall this is where the Hole saw came to the rescue it made the job easy so I recommend this tool highly.
Delaney Gislason (verified owner) –
I used this with a BuildPro pipe coping tool. I used it on 1.5″ Stainless Steel Sch 40 pipe (1.9″ OD) and it worked awesome. I did use Tapmatic Edge lube, and let the hole saw do the cutting. I must have coped 50 pipes or more, without any issue. I did snap off one carbide tooth, but the it didn’t stop work. On such a hard material as 316 Stainless Steel, this was a small price to pay for so much work.
Joan Grimes (verified owner) –
Quality and performance
Estella Jacobi (verified owner) –
Works great. Was a replacement as my previous hole saw wore out
Gerhard Kris (verified owner) –
The hole saw worked better than expected. I used it to cut holes in cement board siding.
Amaya Runolfsdottir (verified owner) –
These hole saw bits do a nice job. I drilled 10 consecutive holes in a row on a 1X6 board for a project that I was doing building a fishing rod holder. I can honestly say that the last hole I drilled was no more difficult than the first one. I drilled these holes with my battery operated drill. There were no issues drilling the holes other than the they did generate some heat, which is to be expected, but did not affect the performance. I’d recommend using these bits and they would particularly work well drilling through sheetrock or less dense materials.
Waldo Little (verified owner) –
I replace a hole saw with the hole saw with Carbide teeth. It works great!. I just hope it lasts for a long time. I will be attempting to replace the hole saws I have with ones that are carbide teeth as I need from now on.
Mabel Crist (verified owner) –
11-26-2020. The Milwaukee 4 inch hole dozer is a quality product and definitely gets the job done quickly.