Milwaukee 4-1/4 in. Hole Dozer Carbide Hole Saw
$43.44
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 4-1/4 in. HOLE DOZER with carbide teeth
Additional information
| Weight | 1.03 lbs |
|---|---|
| Dimensions | 2.25 × 5.88 × 6.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 4-1/4" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | N/A |
| Model | 49-56-0744 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 4-1/4 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-20-8852
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# DW2043 Z
Drill Bits
Model# FB-007
Drill Bits
Model# FB-005
Drill Bits
Model# FB-003
Drill Bits
Model# 48-25-2252
Drill Bits
Model# DW2046 G
Mireya Gibson (verified owner) –
A little bit high in price but did the job
Nelson Cronin (verified owner) –
Carbide helps cut through plastic very well!!
Jamir Quitzon (verified owner) –
These hole saw bits do a nice job. I drilled 10 consecutive holes in a row on a 1X6 board for a project that I was doing building a fishing rod holder. I can honestly say that the last hole I drilled was no more difficult than the first one. I drilled these holes with my battery operated drill. There were no issues drilling the holes other than the they did generate some heat, which is to be expected, but did not affect the performance. I’d recommend using these bits and they would particularly work well drilling through sheetrock or less dense materials.
Zoe Eichmann (verified owner) –
I used the saw with an arbor that I already had to cut a shower drain hole through 1/4″ Hardieboard plus 3/4″ plywood sub-floor. The carbide saw went through both layers relatively easy when compared to a bi-metal saw that just skimmed the surface. The Oatey drain fit perfectly in the 4-1/2″ hole. Home Depot had the best price and shipping was free and quick.
Shaniya Reynolds (verified owner) –
I replace a hole saw with the hole saw with Carbide teeth. It works great!. I just hope it lasts for a long time. I will be attempting to replace the hole saws I have with ones that are carbide teeth as I need from now on.
Juston Homenick (verified owner) –
Took awhile but eventually cut a hole through my masonry wall. Comparing with a different hole saw I have, the teeth on this one are too smooth. I think they should be more jagged to catch and grind against the masonry.
Clementine Kuvalis (verified owner) –
Hands down the best holesaw out there. I have been using this for a month now and have lost count on the number of holes I have drilled. It’s great for those holes through 2×6 wood plates and when you encounter a nail or screw, it’ll cut right through it. I have used other leading brands and have been disappointed with them while this one has not dulled yet and cuts awesome clean holes. For the price, you certainly get what you pay for.
Johanna Schuster (verified owner) –
Did an excellent job cutting through thick stainless steel.
Willis Barrows (verified owner) –
Precision cuts. The quality is top notch.
Gayle O’Hara (verified owner) –
I drilled 4, 7/8 inch holes through 1/4 steel. I used my drill press at 1000rpm, no lube, it drilled easily in about 20 seconds but the chatter and vibration from my drill press made it 1/16″ too big. I’m not 100% sure if it’s the bit or my press, but don’t make my mistake and test it in scrap first to test your hole.
Cathrine Abshire (verified owner) –
work great
Jalen Balistreri (verified owner) –
I have used Milwaukee hole saws for so many things its hard to keep track. I like this hole saw particularly because it is much closer to a 2″ hole than a 2″ hole saw. Hole saws are very crude ways of cutting a hole and are never the exact size you need. This being just under 2″ makes fitting for a perfect 2″ hole so much easier. These are a great option when needing to cut holes. I have many of this brand that have cut many holes, they just keep going.
Felicia Emmerich (verified owner) –
Dozer is putting it mildly. Milwaukee Hole Dozers do amazing things to all materials short of concrete. hard working and long life make them unbeatable.
Luella Abbott (verified owner) –
The 5 inch carbide hole dozer saw arrived very quickly and secured in its own blister pak, inside a carton with bubble wrap. All intact. I selected it because of the mfg’ers reputation for top quality products and tools. I like the ease of securing it to the drill bit. The specific feature is the toughness of the saw and teeth. I use it on different materials and it cuts thru easily. Make sure you have the optional handle attached to your drill in case the saw snags so that you don’t wrench your wrist. The quality is superb! Easy to use. It’s working out and cutting holes as planned and expected. I like it and would order another.
Cecile Wunsch (verified owner) –
I used the hole saw to cut a faucet hole in a stainless steel sink. It cut clean and fast.
Gerry Goodwin (verified owner) –
This is a beast of a hole saw. You need something strong when cutting a hole that big and this hole saw fits the bill. Make sure you have a powerful, relatively slow turning drill. The hole saw fits both of my mandrels perfectly and locks in tightly. The carbide tips are sharp and cut quickly through metal or wood. Obviously drywall is not problem The slots on the side make removal of the slug or coupon easier. This was a great addition to my shop.
Mariane Glover (verified owner) –
Cut through stucco line butter. Perfect for cutting in new electric boxes.
Dawson Thompson (verified owner) –
Better then the old style.
Elsa Koelpin (verified owner) –
I have been a builder remodeler for 49 years, and as such I have many opportunities to use a tool like this Milwaukee 5 IN. CARBIDE HOLE DOZER SAW. These carbide hole saws are of high quality, and they work very well for work requiring drilling work into more challenging materials that we drill into as we often do. Milwaukee tools are always of high quality as well, so these are a very good example of that.
Rubye Toy (verified owner) –
Great holesaw