Milwaukee 4-1/4 in. Hole Dozer Carbide Hole Saw
$43.44
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 4-1/4 in. HOLE DOZER with carbide teeth
Additional information
| Weight | 1.03 lbs |
|---|---|
| Dimensions | 2.25 × 5.88 × 6.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 4-1/4" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | N/A |
| Model | 49-56-0744 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 4-1/4 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-20-8852
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# DW2043 Z
Drill Bits
Model# 48-25-2122
Drill Bits
Model# FB-003
Drill Bits
Model# 48-28-1010
Drill Bits
Model# FB-015
Kyler Ryan (verified owner) –
The Hole Dozer makes a very clean and precise hole, at least in wood. The arbor holes are compatible with the Milwaukee Hole Hawg as well so you can use the arbors from the Hawg kit with the Hole Dozer. When cutting through wood, be careful not to put too much pressure on one side as the saw can grab and stall or spin the wood stock around. The round wood cutting can be easily removed from the saw but there are access ports on the side in case you need to pry it out.
Thea DuBuque (verified owner) –
It dulls quickly
Emelia Schumm (verified owner) –
WORKED PERFECT FOR WHAT I NEEDED
Gretchen Stokes (verified owner) –
Hole Saw 5 inchThis is a sturdy and sharp circular hole saw that cuts a 5 inch hole. Mandril not included, but screwed on perfectly to a mandrel I already have. Carbide teeth should make it last a long time. It is deep enough (cutting depth over 1.6 inches). It has adequate slots around the side to make plug removal easy enough. I’m pretty happy with this 5 inch hole saw.
Tyrel Conn (verified owner) –
Cuts like crazy. Better to run slow & hang on to start.
Trinity Effertz (verified owner) –
11-26-2020. The Milwaukee 4 inch hole dozer is a quality product and definitely gets the job done quickly.
Alexane Tromp (verified owner) –
Did the job cleanly
Mara Dicki (verified owner) –
Just right
Charlie Gerlach (verified owner) –
These hole saw bits do a nice job. I drilled 10 consecutive holes in a row on a 1X6 board for a project that I was doing building a fishing rod holder. I can honestly say that the last hole I drilled was no more difficult than the first one. I drilled these holes with my battery operated drill. There were no issues drilling the holes other than the they did generate some heat, which is to be expected, but did not affect the performance. I’d recommend using these bits and they would particularly work well drilling through sheetrock or less dense materials.
Elias Crist (verified owner) –
I had previously purchased one of these hole saws for my husband and after using it, he asked me to order a few more in different sizes.He says that they are great. They are tough, easy to set up and to remove. He has used plenty in the past that would get 3-4 uses and then dull so badly that they had to be tossed out.These seem to have much greater durability.
Juston Fay (verified owner) –
As expected, high quality, well made. A great addition to my Milwaukee set.
Rollin Kuhn (verified owner) –
I already have 5 other individual hole saw sizes and the 13 piece hole saw kit (251885) from Milwaukee, this is why I keep purchasing new individual ones as I need them. The quick change hole saw arbor, 233438, with pilot drill bit is a must, it makes hole saw bit changing so much easier and faster. I primary use them to drill through wood but sometimes I’ve hit nails, this is why I only use these Milwaukee saws. I highly recommend them.
Rudy Blick (verified owner) –
Perfect for the job I have to do.
Lucas Hartmann (verified owner) –
Cut 23 circular holes in metal 1/8 thick with no difficulty. Worked great
Celia Kreiger (verified owner) –
Great hole saw! Cuts through wood like butter! Just make sure to get the center drill with the prongs, with a hole saw this big, it will spin right off of a typical threaded center bit without the prongs to keep it from spinning on the threads. It fit my smaller hole saw center bit, but it unthreaded as soon as I stopped. This wasn’t a problem once I got the correct center bit with the prongs!
Dax Renner (verified owner) –
I’ve used Milwaukee products for many years and all their tools are top-notch. The Hole Dozer hole saws are no exception…work great.
Amani Pfeffer (verified owner) –
Did the job. I had a bit of trouble setting the torque correctly.
Nellie Yundt (verified owner) –
this hole saw cut right thru the steel that I needed a hole in.
Jeff Langosh (verified owner) –
The hole saw worked better than expected. I used it to cut holes in cement board siding.
Karianne Johns (verified owner) –
Odd size no one carries in the store. Works like it is supposed to. Too bad we couldn’t get it sooner, but it was delivered straight to my house.