Milwaukee 4-1/2 in. Hole Dozer Carbide Hole Saw
$44.99
The HOLE DOZER with Carbide Teeth hole saw delivers 50X life and thermal coating for reduced friction for heavy duty metal and multi-material uses.
In stock
Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 4-1/2 in. HOLE DOZER with carbide teeth
Additional information
| Weight | 1.41 lbs |
|---|---|
| Dimensions | 2.25 × 5.88 × 6.88 in |
| Arbor included | No |
| Bit Diameter | 3/8 in |
| Bit Length (in.) | 1.88 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 4-1/2" |
| Individual/Set | Individual |
| Material Cut | Multi-Purpose |
| Min Chuck Size Required | 1/2 In. |
| Model | 49-56-0746 |
| Pilot Bit Included | No |
Reviews (78)
78 reviews for Milwaukee 4-1/2 in. Hole Dozer Carbide Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-20-8852
Drill Bits
Model# 48-25-2122
Drill Bits
Model# FB-015
Drill Bits
Model# 282269
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Milwaukee 18 in. x 7/16 in. Bit Extension Bit Extention For Selfeed Bits and Hole Saws
Model# 48-28-4011
Drill Bits
Model# FB-005
Drill Bits
Model# 282303
Elisha Sauer (verified owner) –
I drilled 4, 7/8 inch holes through 1/4 steel. I used my drill press at 1000rpm, no lube, it drilled easily in about 20 seconds but the chatter and vibration from my drill press made it 1/16″ too big. I’m not 100% sure if it’s the bit or my press, but don’t make my mistake and test it in scrap first to test your hole.
Charity Oberbrunner (verified owner) –
This is a quality product which performed perfectly. I would recommend this product.
Christelle Hermiston (verified owner) –
The Milwaukee 5-inch Carbide Hole Dozer Saw is an excellent hole saw, very durable, and long lasting. I have used various sizes of these hole saws by Milwaukee for years. They cut through wood, nails, stainless steel, shingles, and cement board. Unlike the “standard” hole saw that seems like a one-time-use, this hole saw will last for many uses. This product is only the saw blade and doesn’t include the 3/8 inch quick-change arbor. This arbor is included in kits or can be purchased separately. All of the Milwaukee Hole Saws, 1-1/4 inch and above, use the same arbor so you can just purchase the size saw you need for the job. The arbor screws into the back of the hole saw and then the sleeve slides into two holes in the back to keep the arbor from tightening into the saw and allows the arbor to be easily removed. The saw cuts a hole up to 1-3/4 inches deep. I recommend using a heavy-duty drill motor so that the torque doesn’t damage the motor, especially when using large saw sizes such as this. The pilot drill bit, that is part of the arbor, is slightly longer than the hole saw so that once the bit cuts through the material on the other side, you can remove the saw and continue drilling from the back side to eliminate tear-out.
Corene Powlowski (verified owner) –
Did an excellent job
Marcelina Breitenberg (verified owner) –
I’ve used Milwaukee products for many years and all their tools are top-notch. The Hole Dozer hole saws are no exception…work great.
Joseph Vandervort (verified owner) –
The four and a half inch hole Dozer says it all. This hole saw cuts through would like a hot knife through butter, and does the same thing going through metal. The wholesale will last a long time if used properly and kept lubricated while cutting in metal. When using a hole saw like this it is recommended to wear safety glasses and have proper safety equipment and training before using it.
Adolph Schamberger (verified owner) –
does what Does what I need it to do.
Annalise Oberbrunner (verified owner) –
this hole saw cut right thru the steel that I needed a hole in.
Richard Cummings (verified owner) –
work great
Jakob Beier (verified owner) –
Great product
Elta Labadie (verified owner) –
Hole Saw 5 inchThis is a sturdy and sharp circular hole saw that cuts a 5 inch hole. Mandril not included, but screwed on perfectly to a mandrel I already have. Carbide teeth should make it last a long time. It is deep enough (cutting depth over 1.6 inches). It has adequate slots around the side to make plug removal easy enough. I’m pretty happy with this 5 inch hole saw.
Dulce Haley (verified owner) –
I use these hole saws all the time – I wish they didn’t cost so much. These saws are a mush for getting through the plate on a house and generally work very well. Carbide is ok I guess – I still haven’t had much luck with them if you hit into a nail or other metal object. They don’t seem to hold up as good as a carbide saw blade does. Still, a must have if your running pipes through the wall.
Sydnie Boehm (verified owner) –
Easy transaction
Gabriella Roberts (verified owner) –
the product worked just as expected. no issues at all.
Lexi Bartoletti (verified owner) –
WORKED PERFECT FOR WHAT I NEEDED
Wilbert Reynolds (verified owner) –
I used the saw with an arbor that I already had to cut a shower drain hole through 1/4″ Hardieboard plus 3/4″ plywood sub-floor. The carbide saw went through both layers relatively easy when compared to a bi-metal saw that just skimmed the surface. The Oatey drain fit perfectly in the 4-1/2″ hole. Home Depot had the best price and shipping was free and quick.
Natalia Feil (verified owner) –
Cut 23 circular holes in metal 1/8 thick with no difficulty. Worked great
April Buckridge (verified owner) –
Breezed through 18ga gauge steel like butter.
Mable Green (verified owner) –
Great quality monster hole saw. Drilled smooth through some plywood for some exhaust vents for a roof job. It looks huge on a my drill. The carbide teeth definitely just chew through wood like a hot knife through butter. Of course I had to be careful because the larger a drill bit is, the more risky it is in a bind up. It did not bind up on me at all but still used it with caution. I really like Milwaukee’s pilot bit which I got separate because it has to knobs that secure into the large bit along with the threaded insert. I didn’t have any problem removing the wood from the bit after the cut out which I really liked. I only used it on wood but this hole saw is a beast. Definitely use a decently powered drill. It’s still really sharp and ready for more and even the paint itself held up which is pretty funny. Definitely recommend this line up Milwaukee hole saws because that carbide definitely makes a difference.
Wilfredo Roob (verified owner) –
Did the job cleanly