Milwaukee 5 in. Carbide Hole Dozer Saw
$49.99
Customize an elegant and convenient addition to complete your cutting jobs in workplace with the help of this amazing Milwaukee Carbide Hole Dozer Saw.
In stock
Description
Milwaukee Hole Dozer with Carbide Teeth hole saws provide 50X Life in Extreme Multi-Material cutting applications when compared to bi-metal hole saws. Built utilizing a tough carbide grade combined with a durable 4 TPI design, yielding the best tooth durability and longest life in Stainless Steel, Abrasive Materials and Fastener Embedded Wood. Cutting depth is 1.62 in., allowing clearance to handle cuts in all materials. with a Thermoset Coating to reduce friction and drag during cutting, users benefit from faster cutting and increased cordless efficiency. Slug removal is made easy with the Plug Jack T-Slot’s. Plug Jack enhanced user productivity by providing best access and leverage to remove material slugs. Hole Dozer with Carbide Teeth are made in USA.
- Milwaukee carbide Teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug jack T-slots enhance user productivity by providing best access and leverage to remove material slugs
- Made in USA
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: one 5 in. hole dozer with carbide teeth
Additional information
| Weight | 1.67 lbs |
|---|---|
| Dimensions | 2.31 × 7.00 × 8.00 in |
| Arbor Size | 1/4 |
| Arbor included | No |
| Bit Diameter | 5 in |
| Bit Length (in.) | 2.49 |
| Bit Material | Carbide |
| Drill Bit Type | Hole Saw |
| Drill Bit Type(s) Included | Hole Saw |
| Drilling Depth (in) | 1.62 |
| Hole Saw Diameter (in) | 5" |
| Individual/Set | Individual |
| Material Cut | Asphalt |
| Min Chuck Size Required | 3/8 In. |
| Model | 49-56-0748 |
| Pilot Bit Included | No |
| Teeth Per Inch | 4 |
Reviews (78)
78 reviews for Milwaukee 5 in. Carbide Hole Dozer Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2535
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# 49-56-7010
Drill Bits
Model# 48-20-8856
Drill Bits
Model# FB-003
Drill Bits
Model# FB-015
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# FB-007
Elena Bradtke (verified owner) –
Perfect for the job I have to do.
Filiberto Kshlerin (verified owner) –
Odd size no one carries in the store. Works like it is supposed to. Too bad we couldn’t get it sooner, but it was delivered straight to my house.
Ricky Mante (verified owner) –
I’ve used Milwaukee products for many years and all their tools are top-notch. The Hole Dozer hole saws are no exception…work great.
Emmanuelle Murazik (verified owner) –
I already have 5 other individual hole saw sizes and the 13 piece hole saw kit (251885) from Milwaukee, this is why I keep purchasing new individual ones as I need them. The quick change hole saw arbor, 233438, with pilot drill bit is a must, it makes hole saw bit changing so much easier and faster. I primary use them to drill through wood but sometimes I’ve hit nails, this is why I only use these Milwaukee saws. I highly recommend them.
Monica Kessler (verified owner) –
Sometimes you have a need to cut holes through different materials to accomplish a task. I bought one of those portable a/c units, it comes with different options to vent it outside one is through the window and the other is through the wall. I have solar screens on my windows and the air flow was very restricted so I needed to vent through the wall this is where the Hole saw came to the rescue it made the job easy so I recommend this tool highly.
Dimitri Marvin (verified owner) –
Cuts like crazy. Better to run slow & hang on to start.
Eladio Wisozk (verified owner) –
Carbide helps cut through plastic very well!!
Ransom Gleichner (verified owner) –
Average rating is due to the slight oval shape and sloppy weld of the material. This caused the saw to cut a larger than stated size hole.
Geovany Fahey (verified owner) –
The four and a half inch hole Dozer says it all. This hole saw cuts through would like a hot knife through butter, and does the same thing going through metal. The wholesale will last a long time if used properly and kept lubricated while cutting in metal. When using a hole saw like this it is recommended to wear safety glasses and have proper safety equipment and training before using it.
Philip Labadie (verified owner) –
Doesn’t look like it but it goes right thru concrete. Works great !
Reinhold Morissette (verified owner) –
Precision cuts. The quality is top notch.
Willy Brekke (verified owner) –
work great
Nigel Hessel (verified owner) –
works excellent on fiberglass pools cutting holes for return jets.
Destiney Ratke (verified owner) –
I have used Milwaukee hole saws for so many things its hard to keep track. I like this hole saw particularly because it is much closer to a 2″ hole than a 2″ hole saw. Hole saws are very crude ways of cutting a hole and are never the exact size you need. This being just under 2″ makes fitting for a perfect 2″ hole so much easier. These are a great option when needing to cut holes. I have many of this brand that have cut many holes, they just keep going.
Pedro Herzog (verified owner) –
Hands down the best holesaw out there. I have been using this for a month now and have lost count on the number of holes I have drilled. It’s great for those holes through 2×6 wood plates and when you encounter a nail or screw, it’ll cut right through it. I have used other leading brands and have been disappointed with them while this one has not dulled yet and cuts awesome clean holes. For the price, you certainly get what you pay for.
Johathan Adams (verified owner) –
These hole saw bits do a nice job. I drilled 10 consecutive holes in a row on a 1X6 board for a project that I was doing building a fishing rod holder. I can honestly say that the last hole I drilled was no more difficult than the first one. I drilled these holes with my battery operated drill. There were no issues drilling the holes other than the they did generate some heat, which is to be expected, but did not affect the performance. I’d recommend using these bits and they would particularly work well drilling through sheetrock or less dense materials.
Kolby Klein (verified owner) –
A little bit high in price but did the job
Lincoln Wisoky (verified owner) –
this hole saw cut right thru the steel that I needed a hole in.